Supply, Laying, Testing and Commissioning of HT 3C x 185 Sq.mm 11KV cable from 33 KV MUSS to A.O. Building and KK Gate Structure

Supply of 11 KV(E), 3 Core x 185 Sq.mm XLPE HT UG Cable with pressure extruded inner sheath, round wire armoured as per IS 7098 Part-II. Armouring wires dia and resistivity as per Is- 3975

Labour charge for laying of 11 KV, 3 Core x 185 Sq.mm XLPE UG Cable in the existing trench. Hume pipe/GI Pipe/pole/tray/wall/structure

Supply of Cable termination kit Indoor type suitable for 3 Core x 185 Sq.mm HT XLPE Cable

Supply of Cable termination kit Outdoor type suitable for 3 Core x 185 Sq.mm HT XLPE Cable

Labour charges for making End Termination for HT XLPE armoured Cable 3cx185 Sq.mm. i) Indoor

Labour charges for making End Termination for HT XLPE armoured Cable 3cx185 Sq.mm. i) Outdoor

Supply of heat Shrink Straight through joint kit suitable for 3 Core x 185 Sq.mm HT XLPE Cable

Labour charges for making HT Cable joint (straight through) heat shrinkable type suitable for 3 Core x 185 Sq.mm HT XLPE Cable by arranging dust/water proof tent

Providing & laying reinforced cement concrete humepipes with collar of 2000mm long 150 mm dia for culverts/ Road crossing / Railway crossing including fixing collars using cement mortar 1:2 proportionate. Work includes cost & conveyance of Hume pipes, collars and other materials, labour, lead, lift, loading, unloading, curing etc. complete

Digging of trench of 1 meter deep x 0.5 meter wide, refilling the trench to the required ground level and consolidating etc., wherever favor block & concrete area the same have to be refinished as it was by tighten the loose soil and supplying required materials, complete. 1. Hard Soil

Digging of trench of 1 meter deep x 0.5 meter wide, refilling the trench to the required ground level and consolidating etc., wherever favor block & concrete area the same have to be refinished as it was by tighten the loose soil and supplying required materials, complete. 1. Asphalt Cutting

Supplying and fixing wiring earth electrode for grounding of power & light circuits, using 40 mm dia., 2.9 mm thick, 2.5 mtr. Long GI Pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in CC chamber of 400 x 400 x 400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia. and the electrode should be covered 150 mm around with alternate layers of salt and charcoal from the bottom of the pipe (CC Chamber). The connection from the electrode is to be established through GI flat using GI bolts and Nuts

Supply and laying of GI Strips 25x6mm for grounding connections, using necessary fixing materials etc. complete

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. confirming to IS 14930, Part II complete with fitting and cutting etc. in the existing trench, complete as required. i) 120 mm dia (OD-120mm & ID-103 mm nominal)

Supply and laying of 150mm dia 25mm thick, 1 mtr length RCC semicircular (c-cut) pipe in trench over the cable

Providing, laying and fixing GI pipe (medium class) with coupler in ground/structure complete with G.I. fittings etc. complete. i) 100 mm dia

Providing, laying and fixing GI pipe (medium class) with coupler in ground/structure complete with G.I. fittings etc. complete. i) 150 mm dia

Supplying and installing cable route marker made up of RCC Block of size 100 cm (H) x 50 cm (W) x 6cm (D) indicating Embossed text as “NMPA HT Cable↑”. with yellow paint and red colour letters

Supply & Installation of 11 KV 200 Amps Single break GOS and GI H- Frame set for fixing 11 KV, 200 Amps single break GOS with insulated GOS operating rod with required accessories etc. complete

Horizontal drilling with 6 inches bore size with HDPE pipe for road crossing (including HDPE pipe and equipment’s) etc. complete

Construction of RCC Cable Duct of size 0.7 x 0.7 mtr inside clear space required for laying cables as per drawing by manual excavation only

Radha Electricals (BID ID -3118540)

Ardee Engineering Limited (BID ID -3117570)

Suntech Engi Automation Private Limited (BID ID -3117748)