Loading
Loading…
Loading…
Tender Value
₹1.4 L
EMD Value
₹2,894
Closing Date
8 Aug 2026, 6:00 pm
Executive Engineer Rew Baramulla
REW BARAMULLA
c/0 concrete path with fencing BWO CGI at Middle school Check brath, Brath kalan Block Zaingeer
2026_RDPR_317064_9
137/Xen/Rew/Bla/2026-27 Dated 21/07/2026
Open Tender
Civil Works
Percentage
30 days
Baramulla
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Baramulla
₹2,894
21 Jul 2026
21 Jul 2026
10 Aug 2026
21 Jul 2026
8 Aug 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shaftswells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil | 0.8 | cum | - | - |
| 2 | Providing & Laying stone soling handpacked in foundation trenches including dressing, watering, compacting and all carriage upto site of work as complete job | 0.79 | Cum | - | - |
| 3 | Providing and laying in position cement concrete of specified grade M10 1:3:6 including curing but excluding the cost of centring and shuttering. All work upto plinth level with: | 2.12 | cum | - | - |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for:
4.6.1 Foundations, footings, bases for columns | 11.15 | sqm | - | - |
| 5 | 12mm Cement plaster of mix: | 14.53 | sqm | 1 | ₹14.52 |
| 6 | Providing and Fixing of Welded strucual steel in built up section/ framed work including cutting, drilling, welding and placing in position and applying of Priming Coat | 280.39 | Kgs | 1 | ₹280.11 |
| 7 | Providing and fixing Colour coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required imcluding fixing of ridges, valleys of the same material upto 600mm wide. | 101.85 | Sqm | - | - |
| 8 | Cariage of sand/Agg. by MT up to 25 Kms | 3.06 | Cum | 1 | ₹3.06 |
| 9 | P/F of information sign board with photographs on walls with paint | 1 | Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.16 MB
BOQ_1037402.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].