Construction of Assistant Director Agricultural Office at Songadh,Ta. Songadh Dist. Tapi

No. figures

1 Excavation for foundation upto 1.50 mt depth including sorting out and 833.00 Cum 120.01

stacking of useful materials and disposing the excavated stuff within all lead

and lift for loose or soft soil.

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting out 417.00 Cum 166.44

and stacking of useful materials and disposing the excavated stuff within all

lead and lift for dense or hard soil.

3 Filling available excavated earth (excluding rock) in trenches plinth side of 526.00 Cum 133.65

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

thickness including watering, ramming and consolidation etc. complete with all

lead and lift.

5 Filling in plinth with sand in layers of 20 cm thickness including watering, 61.10 Cum 471.69

ramming and consolidating etc. complete with all lead and lift.

6 Anti Termite System :- Providing and laying of permanent piping technology 393.00 Sq.m. 134.33

Anti Termite treatment before flooring work by installing LLDP (Low linear

density Polyethylene) tube of 8 mm O.D.& 6.4 mm I.D. with in Built Pressure

Compensation chip every 30 cm interval in the tube, having working pressure

of 2 kg/cm 2 and release rate of 1.9 ltr/Hour fixed by P-Clip and nails. The

LLDP pipe shall be installed at the entire periphery of the building and at

internal network of building depth of 20 to 200 mm under floor every 2 to

mtr. c/c distance (adjustable as per building layout) & ends of loop pass

through a PVC Elbow of minimum 32 mm ID at junction box of wall and floor

level, entering into a steel reinforced grooved flexible pipe mini.22 mm LD

leading into junction box and during injecting chemicals for termite control

treatment. The anti-termite chemical Imidcloprid 30.5% SC mix as per IS

(part-III) shall be injected by the pressure pump diluted with water @

ml/5ltr of water at the rate of 2 kg/sq.cm.@ 5 ltr /Smt. The contractor shall

submit approved line plan

for piping system and junction boxes dully approved by

Engineer in charge with bond of 5 years warranty.

7 Providing and laying controlled cement concrete M-150 and curing complete 165.00 Cum 4724.91

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Foundations, footings, base of columns and mass

concrete for PCC.

8 Providing and laying cement concrete work 1:2:4 (1 cement : 2 coarse sand : 78.80 Cum 4051.36

4 graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, base or columns and mass concrete.

9 Providing and laying controlled cement concrete M-200 and curing complete 69.60 Cum 4904.56

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Plinth Slab.

10 Providing and laying controlled cement concrete M-250 and curing complete 295.00 Cum 4582.22

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in footings & mass concrete.

11 Providing and laying controlled cement concrete M-250 and curing complete 20.00 Cum 7599.39

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Columns upto Ground level.

12 Providing and laying controlled cement concrete M-200 and curing complete 67.70 Cum 7569.16

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts for All FLOOR.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

13 Providing and laying controlled cement concrete M-250 and curing complete 77.80 Cum 5973.14

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in plinth and Ground beams.

14 Providing and laying controlled cement concrete M-200 and curing complete 115.40 Cum 6202.41

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in beam for all floors.

15 Providing and laying controlled cement concrete M-200 and curing complete 116.70 Cum 6359.31

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Slab for all floors.

16 Providing and laying controlled cement concrete M-200 and curing complete 5.50 Cum 7725.09

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Lintel for all floors.

17 Providing and laying controlled cement concrete M-200 and curing complete 7.00 Cum 6405.57

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Chhajja for all floors.

18 Providing and laying controlled cement concrete M-200 for R.C.C. work and 23.00 Cum 6279.98

curing complete including the cost of form work but excluding the cost of

reinforced concrete work in coping on all floor.

19 Providing and laying controlled cement concrete M-200 and curing complete 13.00 Cum 7271.55

including the cost of form work but excluding cost of reinforcement etc.

complete in (E) Stair case up to floor two level for all floor.

20 Providing I.S.I. Mark T.M.T. bar Fe-550D reinforcement for R.C.C. work 93029.00 Kg. 95.14

including bending, binding and placing in position complete for all floor level.

21 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 79.70 Rmt. 24.28

1:1 including neat cement finishing, watering etc. complete.

22 Providing and laying brick work using common burnt clay building 72.00 Cum 4121.55

conventional type bricks having crushing strength not less than 35 Kg./Sq.cm.

in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

including the cost of all materials and labour charges etc. complete.

23 Providing and laying brick work using common burnt clay building 314.00 Cum 4410.17

conventional type bricks having crushing strength not less than 35 Kg/sq.cm.

in super structure in cement mortar 1:6 (1 cement : 6 fine sand) for all floors

including the cost of all materials and labour charges etc. complete.

24 Providing and laying half brick work using common burnt clay building 372.00 Sq.m. 669.83

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm

in cement mortar 1:4 (1 cement : 4 coarse sand) for all floors including the

cost of all materials and labour charges etc. complete.

25 Providing 10 mm. thick mala cement plaster with 1 x 1 cm grooves in single 953.00 Sq.m. 171.70

coat on brick / concrete wall/ceiling for interior plastering upto floor two level

finished even and smooth including scaffolding, curing etc. complete in

cement mortar 1:3 (1 cement : 3 fine sand) for all floors.

26 Providing 20 mm thick double coat mala cement plaster on interior brick / 1858.00 Sq.m. 281.39

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand) finished

with trowel including scaffolding, curing etc. complete for all floors.

27 Applying two coats of putty & two coats of primer of approved brand and 2811.00 Sq.m. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth for all floors.

28 Finishing wall with 100% acrylic emulsion weather proof paint on wall surface 2038.00 Sq.m. 117.40

to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, dust and remains of loose powdered materials etc. complete

for any height as directed by Architect.

29 Wall painting (two coats) with plastic emulsion paint of approved brand and 1858.00 Sq.m. 81.38

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

30 Wall painting (two coats) with plastic emulsion paint of approved brand and 953.00 Sq.m. 86.92

manufacture on undecorated ceiling surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

31 Providing 20mm thick sand faced Gutka cement plaster on walls upto height 2038.00 Sq.m. 337.52

10 metres above ground level consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement :

1-sand) etc. complete.

32 Providing and laying 60 cm x 60 cm GVT matt finished vitrified 10mm thick 266.00 Sq.m. 2166.45

tiles flooring over 20 mm (average) base of cement mortar 1:6 (1 cement :

coarse sand) on new surface or fixing on existing flooring by adhesive

materials including dismentaling of existing flooring and jointed with colour

cement slurry including grooving of periphery of tiles with required dimension

& finished with flush pointing and cleaning the surface etc. complete.

33 Providing and laying 60 cm x 60 cm GVT matt finished vitrified 10mm thick 27.00 Sq.m. 1934.15

tiles in risers of steps, skirting dedo and pillars laid on 10mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) and jointed with colour cement slurry

mixed with pigment to match the shade including grooving of periphery of tiles

with required dimension & finished with flush pointing and cleaning the surface

etc. complete.

34 Providing and laying 60 cm x 60 cm Soluble salt / PVT full body vitrified 10 347.00 Sq.m. 1270.58

mm thick tiles flooring over 20 mm (average) base of cement mortar 1:6 (1

cement : 6 coarse sand) on new surface or fixing on existing flooring by

adhesive materials including dismentaling of existing flooring and jointed with

colour cement slurry including grooving of perifery of tiles with required

dimension & finished with flush pointing and cleaning the surface etc.

35 Providing and laying 60 cm x 60 cm Soluble salt vitrified 10 mm thick tiles in 12.00 Sq.m. 1294.82

risers of steps, skirting dedo and pillars laid on 10mm thick cement mortar 1:3

(1 cement : 3 coarse sand) and jointed with colour cement slurry mixed with

pigment to match the shade including grooving of perifery of tiles with required

dimension & finished with flush pointing and cleaning the surface etc.

36 Providing and laying 600 mm x 600 mm Antiskid Ceramic tiles in flooring, 103.00 Sq.m. 929.39

treads of steps & landing on a bed of 12 mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finished with flush pointing in white cement and

approved colour, shade and size by Architect or Engineer in charge for all

37 Providing and laying coloured glazed tiles of the size 600 mm x 1200 mm x 8 146.00 Sq.m. 1477.25

mm / 300 mm x 600 mm x 8 mm with border tiles in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

38 Providing and laying machine cut free edge machine mirror polished marble 68.00 Sq.m. 1677.61

slab 18 to 20 mm finished treads and risers in length with 1 cm projecting,

nozing rounded moulding in tread laid over 12 mm (av.) thick bases of cement

mortar 1:6 (1-cement : 6-coarse sand) jointed with grey or colour cement

slurry including rubbing and polishing including making three Nos. of grooves

of size 3mm x 3mm along the length of treads etc. complete.

39 Providing and laying 18-20 mm thick polished Granite in single piece with all 150.26 Sq.m. 1950.31

exposed edges polished, chamfered and protected 6mm from finished wall

thickness in sill and jambs laid on 10 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) laid over and jointed with grey cement slurry including rubbing

and polishing etc. complete also fixing : Rear face of granite shall be standard

using clean sand sieve no. 10 passed 2mm fixed with araldite and dried for at

list 36 hours.

40 Providing and fixing polished 18 mm thick black granite with full round edge 3.00 Sq.m. 2421.58

and double side polished of approved quality in between urinal and fixing with

cement slurry & adhesive including moulding of both exposed edges as

directed by engineering in charge etc. complete.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

41 Providing and laying broken china mosaic flooring for terrace using 12 mm to 443.50 Sq.m. 765.97

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto 15 cm

along the wall, clearing with water and oxalic acid etc. as directed.

42 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2-coarse 443.50 Sq.m. 358.71

sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B) 50mm thick.

43 Providing and fixing 38 mm thick flush double door shutter, solid core 13.00 Sq.m. 6994.15

confirming to IS:2202 & ISI approved manufacture with Anodized Aluminium

section (door section no 19552 weight not less than 1.1 kg/mt) frame size

63.5mm x 38mm inserted non teak wood frame inside the aluminium section

for durable grip of hinges (4 no. each shutter) & double shutter with required

teakwood batten having 1mm thick lamination on both side, durable grip shall

be providing with both side 15cm long stainless steel handle and necessary

locking system of fixtures & fastenings etc. directed by engineer in-charge.

44 Providing and fixing 38 mm thick flush Single door shutter, solid core 38.00 Sq.m. 6386.74

confirming to IS:2202 & ISI approved manufacture with Anodized Aluminium

section (door section no 19552 weight not less than 1.1 kg/mt) frame size

63.5mm x 38mm inserted non teak wood frame inside the aluminium section

for durable grip of hinges (4 no. each shutter) & double shutter with required

teakwood batten having 1mm thick lamination on both side, durable grip shall

be providing with both side 15cm long stainless steel handle and necessary

locking system of fixtures & fastenings etc. directed by engineer in-charge.

45 Providing and fixing hollow double door shutter specially designed of 35 x 8.00 Sq.m. 6247.05

100mm M.S. pipe hollow frame with horizontal 25 x 25 mm M.S. square pipe

band at 0.475 equal distance through the height of the frame with 19mm

marine plywood both side with edge beading durable grip and durable hinges

pivoted shutter with required teak wood batten having 1mm thick lamination

on both side, Durable grip shall be providing with both side 15cm long

stainless steel handle and necessary locking system, SS fixtures & fastenings

etc. and colour, pattern, design of which is to be approved by the architect or

directed by engineer in charge.

46 Providing and fixing FRP frame size 100 x 50 mm and fixing FRP of 35mm 16.00 Sq.m. 2632.06

thick Fiber Glass shutter with 1.5 to 2.0 mm thick fire retardant grade FRP

skin in depressed panel design having extra reinforcement on sides & edges

& in gel coat finish. The core of the shutter is to be filled up with injected

retardant grade polyurethane foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fixtures. The whole FRP frame &

shutter is to be water proof, weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S. hinges with necessary screws &

alluminium fixtures & fastenings.

47 Providing and fixing window having extruded aluminum colour anodized 38.00 Sq.m. 1924.05

section frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m,

horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm

@1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm

x 1.29mm@ 0.456 kg/mt, vertical member of size 40mm x 18mm x 1.29mm

@ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window and

providing and fixing standard extruded of alluminium section of size 63.50 x

38.10 x 1.95 mm, @ Wt 1.094 Kg / Rmt with colour anodized alluminium

frame with 5 mm thick transparent bronze colour tinted float glass as details

etc. complete for fix window.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

48 Providing and fixing window having extruded aluminum colour powder coated 65.00 Sq.m. 1563.48

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm

@ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @

wt.of 0.456 Kg/mt. with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. AND providing and fixing

standard extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as details etc. complete for fix

49 Providing and fixing window having extruded aluminum colour powder coated 12.00 Sq.m. 1642.26

section frame main outer size 63.50 x 38.10 x 1.95 mm, @ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm

@ wt.of 0.0.659 Kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm

x 1.29mm @ wt.of 0.456 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. complete

for window.

50 Providing and fixing in position standard extruded approved colour anodized 10.00 Sq.m. 2145.24

Aluminum Ventilator as per design with outer frame 65 x 25 x 1.95 mm (@ Wt

1.094 kg/Rmt) fitted with 3mm thick Bajari figure adjustable tinted glass

louvers. The ventilator includes provisions for an exhaust fan opening and is

complete with all fixtures, fastenings, labour and equipment as per detailed

drawings and as directed by the Engineer-in-charge.

51 Providing and fixing 90 cm high Stainless steel railing made from anticorrocive 48.00 Rmt. 3748.11

316 grade S S pipe of 50 mm dia (16 Gauge) as hand rail with S S 316 grade

Baluster of 38 mm dia (16 Gauge) as a vertical support fixed in RCC slab at

1.2m c/c including three horizontal S.S. pipes of 25 mm dia (16 Gauge) at

equal distance fixed with baluster including accessories as per detailed

drawing as directed etc. complete.

52 Providing & fixing M.S. grills of required pattern to wooden frames of windows 3458.00 Kg. 106.48

etc. with M.S. flats at required spacing & frame around, square or round bars

with round headed bolts & nuts or by screws (A) Plain grill.

53 Painting three coats (one coat of priming coat + two coats of enamel paint) on 124.00 Sq.m. 125.72

new steel and other metal surface with enamel paint, brushing interior to give

an even shade including cleaning the surface of all dirt, dust and other foreign

54 Providing and fixing 114mm wide G.I. sheets louvers having weight not less 26.00 Sq.m. 4781.04

than 490 gm/mt. roll formed to create 84mm wide louver snap fixed on special

shaped G.I. channel, fix louvers & channels shall be finished with powder

coating of 55 micron (1) 0.55mm thick sheet etc. complete as per detail

drawing as directed.

55 Providing and fixing S.S. hand rail made S.S. 304 of 50 mm inside dia. 16 60.00 Rmt. 1532.37

guage round pipe supported with 8 mm thick S.S. 304 base flange on wall

including end S.S. ball 75mm dia, anchor fasteners, nuts, accessories as per

detailed drawing etc. complete as directed by Architect or Engineer in charge.

56 Providing and fixing Wall Hung CERA or equivalent CARLTON Cat. No. 7.00 No. 17814.38

S1044147 snow white size 490 x 350 x 360mm P Trap with Duroplast slim

soft close seat cover including Health Faucet ABC body with 1 m SS braided

connection pipe, Flush cock consisting of exposed part F1013751 (Lever,

Cartridge, sleeve, flange) and Concealed part F4060102 with all fitting inlet

and outlet connection and all required fitting accessories etc. completed as

per directed engineer in-charge.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

57 Providing and fixing Wash Basin CERA or equivalent CHERUB Cat. No. 12.00 No. 5908.50

S2020112 Snow White size 400 x 400 x 135mm including Polyamide braided

connection pipe 12mm dia, 450mm length Cat. No. F8070402, waste coupling

with ceramic pop-up push type (Full thread) 32mm dia. Cat. No. F8050351

with all fitting inlet and outlet connection and all required fitting accessories

etc. completed as per directed engineer in-charge.

58 Providing and fixing swivel mirror 630 x 445mm rectangular shape including 6.00 No. 3229.98

all fittings and labour charges etc. completed as per directed engineer in

59 Providing and fixing single towel rail 300mm long (AQN-GRF-7711B) including 6.00 No. 2590.65

all fittings and labour charges etc. completed as per directed engineer in

60 Providing and fixing CERA bib cock with wall flange and aerator Cat.No. 18.00 No. 2657.31

F1016151 with 15mm dia. extension nipple including all fittings and labour

charges etc. completed as per directed engineer in charge.

61 Providing and fixing CERA Pillar cock with 310mm long extended body and 12.00 No. 4066.26

aerator Cat. No. F1016102 including all fittings and labour charges etc.

completed as per directed engineer in charge.

62 Providing and fixing CERA Angle cock with wall flange Cat.No. F1016201 6.00 No. 2045.25

including all fittings and labour charges etc. completed as per directed

engineer in charge.

63 Providing and fixing Soap holder including necessary S.S. screw with labour 9.00 No. 677.71

etc. complete.

64 Providing, laying and jointing in true line and level I.S.I. mark 50mm dia. 65.00 Rmt. 195.67

U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c shall be concealed or open as directed including necessary fitting etc.

including testing of pipe and joints and fixing the same with adhesive solvent

including cost of all materials.

65 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 40.00 Rmt. 148.12

U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c shall be concealed or open as directed including necessary fitting etc.

including testing of pipe and joints and fixing the same with adhesive solvent

including cost of all materials.

66 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 50.00 Rmt. 91.84

U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c shall be concealed or open as directed including necessary fitting etc.

including testing of pipe and joints and fixing the same with adhesive solvent

including cost of all materials.

67 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 40.00 Rmt. 72.65

U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in

charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c shall be concealed or open as directed including necessary fitting etc.

including testing of pipe and joints and fixing the same with adhesive solvent

including cost of all materials.

68 Providing, laying and jointing in true line and level I.S.I. mark 110mm dia. 46.00 Rmt. 857.65

U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end plain and

other end socketed with rubbering & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diameter x 149 mm length x 145 mm height at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

69 Providing, laying and jointing in true line and level I.S.I. mark 75mm dia. 12.00 Rmt. 737.00

U.P.V.C. SWR Type B pipe confirming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp at every 2000 mm c/c or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all

materials.

70 Providing and laying (to level or slopes) and jointing reinforced concrete light 276.00 Rmt. 678.01

duty non pressure pipes I.S. Class NP-2 of the following internal diameter with

collars and butt ends prepared for collar joints including testing of joints

complete. (D) 300mm dia.

71 Providing, laying and jointing in true line and level I.S.I. mark 160mm dia. 12.00 Rmt. 834.38

U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end plain and

other end socketed with rubbering & fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 160 mm diameter x 210 mm length x 196 mm height at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

72 Providing and fixing in position PVC SWR cowl vent to pipes (C) 75mm dia. 2.00 No. 15.15

as directed.

73 Providing and fixing in position PVC SWR cowl vent to pipes (B) 110mm dia. 7.00 No. 27.27

as directed.

74 Providing and fixing PVC SWR Nahni trap IS-14735 for drain - 100 mm 20.00 No. 585.37

diameter with jali of the following nominal diameter of self cleaning design with

C.I. screwed down or hinged grating including the cost of cutting and making

good the walls.

75 Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber 4.00 No. 1246.92

and water tight C.I. cover with frame of 300 x 300 mm size (inside) with

standard weight (i) square mouth traps (B) 150 mm x 100 mm size P or R

76 Constructing brick masonry chamber for underground inspection chamber and 12.00 No. 3895.37

bends with bricks having crushing strength not less than 35 Kg/Cm2 in C.M.

1:5 precast fibre reinforced concrete frame & cover 455mm x 610mm internal

dimensions R.C.C. top slab with 1:2:4 mix (1-cement : 2 coarse sand :

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete. (ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one or two inlets

77 Extra over items for every additional depth of 0.1 m or part thereof beyond 7.00 No. 264.86

450mm depth for brick masonary chamber (ii) for 500mm x 700mm.

78 Constructing brick masonry chamber for underground C.I. Inspection chamber 11.00 No. 7415.12

and bends with bricks having crushing strength not less than 35 Kg. Cm2 in

C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1-

cement :2- coarse sand : 4 graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc.

complete. (iii) Inside dimensions 600mm x 850 mm and 450mm deep for pipe

lines with three or more inlets.

79 Extra over items for every additional depth of 0.1 m or part thereof beyond 7.00 No. 325.59

450mm depth for brick masonary chamber (iii) for 600mm x 850mm size.

80 Providing, erecting and fixing I.S.I. mark double coated water tank of required 5000.00 Litre 3.95

capacity each with all necessary fittings and connection etc. complete on

terrace as directed.

81 Providing and fixing ball cock of approved quality as directed. (A) Copper 1.00 No. 189.84

Metal (iv) 50mm dia.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

82 Providing, filling and laying Cinder in sunken area including ramming, 9.00 Cum 438.14

watering, consolidating for all floors etc. complete as directed by Engineer in

83 Providing and laying water proofing treatment by conventional method 105.00 Sq.m. 984.75

including cleaning the slab surface by wire brush as directed including

providing first layer of C.M. 1:4 of 40 mm thickness mixed with water proofing

compound at rate prescribed by manufacturer, including putting of brick bats

of average thickness 40 mm Well immerssed in water laid uniformly on first

layer of mortar including applying cement slurry @ rate of 0.08 bag/sqm. on

fixed layer of brick bats including maintaining necessary slope, in second layer

40 mm thick C.M. 1:4 mixed with water proofing compound as directed,

including finishing smooth with cement slurry as directed complete.

84 Providing & fixing in position 300 mm high, English letters made from 1.0 mm 50.00 No. 707.00

thick stainless steel sheet as directed by engineer in charge with all necessary

tools and plants etc. complete.

85 Providing and fixing in position 150 mm high, English letters made from 1.0 50.00 No. 404.00

mm thick stainless steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

86 Providing and fixing M.S. ladder of required pattern with MS flats (30 x 3 mm) 300.00 Kg. 116.15

or round or square bars (12 mm) at required spacing and with round headed

bolts and nuts or screws or welding including primer coat of approved quality

and two coats of oil paints as directed by engineer in charge.

87 Providing and fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 42.00 Sq.m. 1122.41

(Attention Tiles i.e. Tactile Warning Surface Indicator (TWSI)}) of Johnsan

Endura Tac Button Yellow Plus or equivalent make in flooring laid on 20 mm

thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface and

jointed with cement slurry including finished with flush pointing & cleaning the

surface for all floors as per detailed drawing etc. complete as directed by

Architect or Engineer in charge. These tiles shall be Anti Skid, Chemical

Resistant, Fade Proof, Frost - heat & weather proof, High Flexural Strength,

Highly Durable, Stain Resistance. All Tactile Warning tiles meet the specific

size and dimension standards as required by ISO/FDIS

88 Providing and fixing a set of wall mounted horizontal stainless steel collapsible 2.00 Set 3110.80

grab bar and vertical stainless steel fixed grab rail of grade SS 304 from round

pipe supported with 75 mm dia. 8 mm thick SS 304 base flange on wall

including anchor fasteners, nuts, accessories as per detailed drawing etc.

complete as directed by Architect or Engineer in charge.

89 Providing and fixing chicken mesh jali with square of 25 gauge at junction the 421.00 Sq.m. 218.16

masonry and RCC member including necessary scaffolding, labour etc.

complete for all floors.

90 Providing and fixing acrylic multilingual Braille (raised dots) DIRECTIONAL 25.00 No. 16797.92

SIGNBOARDS of size 225 x 150mm designed as per accessibility standards

and having 3.5mm thick acrylic base plate with Upper Case San Serif words

made of white acrylic non glare cut out letters of height 15mm raised not less

than 0.8mm above base plate and the equivalent word written in Hindi with

Devanagari non glare acrylic letters of height 15mm raised not less than

0.8mm above base plate and having a non-glare acrylic cut arrow pointing in

the required direction. Each signboard to be fixed as per manufacturers

specifications on the wall at the approved location and at a height of 1200mm

from FFL complete as per design / specifications and guidelines as per the

entire satisfaction of the Engineer-in-charge.

91 Providing and fixing Braile Indicator of size 200 mm x 50mm for hand rails of 28.00 Rmt. 771.74

the approved design and make have braile dots raised 0.5 mm above base

plate to be installed at specific locations as per direction of the Engineer -in-

92 Providing and fixing of conspectus tape 50mm width on of treads in staircase 95.00 Rmt. 81.81

including cutting pasting etc. as per harmonised guidelines complete in all

respect to the entire satisfaction of engineer in charge.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

93 Providing and laying Plinth protection 0.40m depth and 1.5m wide having 143.00 Sq.m. 2286.64

0.2m murrum + 0.2m gravel filling including watering, ramming and

consolidating etc.with bounded buy 0.23m thick brick work (1 sand :

aggregate). The top layer shall be 0.10m thick 1:2:4 PCC and 0.1m thick M-

150 concrete work and above, providing and fixing precast rubber dye / steel

dye inter locking concrete block 60mm thick with grade of concrete M-300

pnumatic compressed / vibrated mechanically and as per approved design

confiraming to IS 15658 : 2006 including 35 mm sand layer for levelling and

filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. complete. All work shall be done as per drawing and directed

Engineer incharge.

94 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete 477.00 Sq.m. 704.07

block 60mm thick with grade of concrete M-300 pneumatic compressed /

vibrated mechanically and as per approved design confirming to IS 15658 :

2006 including 35 mm sand layer for levelling and filling the joint with sand in

proper line and level as per guidelines of IRC : SP 63-2018 etc. complete.

95 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 100.00 Rmt. 43.22

96 Providing and fixing Urinal of approved quality including connection with trap 4.00 No. 4184.43

and with integral longitudinal flush pipe.(A) Squatting plate pattern white

earthenware 550mm x 300mm.

97 Providing and fixing Ladies urinal of approved make and design, including 1.00 No. 2569.44

wall-mounted or squatting pan type with white glazed finish, complete with all

necessary C.P. brass stop cock, PVC / CPVC water supply connections,

waste pipe with trap and accessories stainless steel fixtures, rubber gaskets,

and washers. All urinal including all fittings and accessories.

98 Providing and fixing exterior grade Aluminium Composite Panel (ACP) sheets 18.00 No. 2718.92

of approved make, 4 mm thick (0.5 mm aluminium skin on both sides), with

PVDF/FEVE coating, of required color and shade, fixed over existing

MS/Aluminium sub-frame using stainless steel fasteners, nuts, bolts including

necessary silicone sealant, EPDM gasket, all scaffolding, cutting, wastage,

finishing, cleaning of surface and as per the direction of Engineer-in-charge.

99 Providing and laying controlled cement concrete M-200 and curing complete 17.00 Cum 8398.15

excluding the cost of formwork and reinforcement for reinforced concrete work

in (B) Walls, from top of foundation level upto floor two level

100 Providing and fixing C.I. Manhole cover 0.60m x 0.45 mt. size having weight 1.00 No. 958.17

not less than 35 kgs. etc. complete.

101 Providing and fixing rolling shutters of approved make made of 80 mm wide 5.00 Sq.m. 3554.40

M.S laths inter-locked together through heir entire length and jointed together

at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangement for inside and outside locking

with push-pull operation including the cost of hood cover and sprig etc.

complete (A) Shutters having width below 3.5 mt.

102 Steel work, welded in built up sections framed work including cutting, hoisting, 5880.00 Kg. 91.08

fixing in position and applying a priming coat of read lead paint. (A) In beam

and joists, channels, angles, tees, flats, with connecting plate or angle cleat

as in main and cross beam. Hip and jack rafters, purlins connected to

common rafters and the like.

103 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 168.00 Sq.m. 867.39

mm thick pre coated G.I. sheet. The precoated sheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy primer on both side

of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have

plastic protective guard film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by pop rivet or

self drilling / self stitching fasteners @ maximum 450 mm c/c along length of

capping / flashing etc complete.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

104 Drilling of min. 250 mm dia. bore hole in all strata including dual over burden 200.00 Rmt. 1270.58

strata by combination DR/DTH rig including lowering 200 mm dia MS ERW

pipes in bore hole and testing etc. all work as per directed engineer incharge.

105 Providing and supplying 200mm dia Screen Pipe in standard length ISI mark 200.00 Rmt. 1682.66

rigid unplasticised PVC pipes suitable for potable water with ring fit joint

including cost of rings, as per IS specification no. 4985/1988 including all local

and central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and including cost

of jointing material etc. complete.

106 Bore plug having 100 mm height made from M.S. plate with 3 holes of equal 1.00 No. 1161.62

distance on circumstances for nut bolts type locking arrangement with nut

bolts and lock nuts of standard make etc. complete suitable for 250 mm dia.

107 Providing PVC insulated flat submersible cable as per detailed technical 240.00 Rmt. 180.79

specification of R/C of GWSSB confirming to IS 694, IEC 60227 / 60228. (d)

108 Supplying and installing 3 Phase Borewell 15.00 HP Submersible Pump Sets 2.00 Set 25250.00

Electric motor driven conforming to I.S. 8034 and motor conforms to IS-9283

working at 3 phase 400/440 volt 50 C/S A.C. supply & 2900 R.P.M. Cat 2.5.

109 Providing and fixing check or non-return full way control wheel valve of 50 mm 4.00 No. 1111.00

110 Providing and fixing to wall, ceiling and floor galvanized mild steel tubes 200.00 Rmt. 90.90

(medium grade) of the following nominal bore, tube fittings and clamps

including making good the wall, ceiling and floor (F) 50mm dia.

111 Excavation for foundation upto 1.5 m depth including sorting out and stacking 94.00 Cum 153.41

of useful materials and disposing of the excavated stuff upto 50 Meter lead.

(B) Dense or Hard soil.

112 Excavation for foundation upto 1.5 m depth including sorting out and stacking 80.00 Cum 267.87

of useful materials and disposing of the excavated stuff upto 50 Meter lead.

(D) Soft rock not requiring blasting

113 Providing 15mm thick cement plaster in single coat on rough (similar) side of 68.00 Sq.m. 222.24

single or half brIck walls / concrete wall for interior plastering and finished

even and smooth in C.M. 1:4 (1 cement : 4 coarse sand) with floating coat of

neat cement slurry etc. complete for Ground floor.

114 Providing and laying (two level or slopes) and jointing with stiff mixture of 48.00 Rmt. 526.46

cement mortar in proportion 1:1, salt glazed stoneware pipes of pipes 150mm

laying lime concrete 1:2:4 (1 lime putty : 2 fine sand : 4 graded brick

aggregates 40mm nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing complete.

115 Providing and fixing decorative entrance gate made out of cast iron and 750.00 Kg. 167.66

various mild steel tabular section combination, the Ornamental entrance gate

should be fixed at compound wall including pattern and die making, cutting,

welding, grinding, fabrication, fixing in position at compound wall with

necessary pedestal, bearing block and other locking arrangement. The

entrance gate should be painted with two coats of priming coat of paint and

two coat of oil paint etc. complete. As per detail design and instruction of

architect.

116 Providing and fixing concertina coil fencing with punched tape concertina coil 150.00 Rmt. 342.39

600 mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto

3mt height of wall with existing angle iron (50mm x 50mm x 5mm) requird

shaped as per directed Engineer in charge, placed 2.4mt or 3.00mt apart and

with 4 horizontal R.B.T. reinforced barbed wire (3 mm), stud tied with G.I.

staples and G.I. clips to retain horizontal, including necessary bolts or G.I.

barbed wire tied to angle iron, all complete as per direction of Engineer-in-

charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) and

weight 43.478 gm/meter at compound wall for ESR M4/ intakewell.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

117 Constructing providing and fabricating cattle guard using channel section 5.00 Sq.m. 5138.88

frame of size ISMC series 100 mm x 50 mm (Weight 9.20 kg/Rmt) and ISMC

section 100 mm x 75mm (weight 11.50 kg/Rmt) intermediate support for

welding G.I.pipe at 12 Cm C/C of size 50 mm in a frame made of Channel

section size 100 mm x 50 mm all round including fixing the unit on prepared

chamber of masonary wall using MS hold fast embedded in masonary wall top

as directed by Engineer in charge and as per drawing and necessary required

arrangement etc. complete.

118 Box cutting the road surface to proper slop and camber for making a base of 445.00 Cum 106.64

road work including removing the excavated stuff and depositing on the road

side slope as directed for all lead and lift.

119 Providing, laying and compacting natural sand & gravel [C.B.R. not less than 103.00 Cum 323.20

20%] below sub base course including carriage of materials spreading in

uniform layer manually on prepared base and compacted with vibratory roller

to achieve desired density including all materials, labour etc. complete.

120 Construction of granular sub-base 150 mm thick by providing coarse graded 154.00 Cum 1175.64

machine crushed B.T. material satisfying MOST specification of grading I

(B.T. stone aggregate 53 mm to 26.5 mm 35%, 26.5 to 4.75 mm - 45% and

2.36 mm below - 20%) including spreading in uniform layer with motor grader

on prepared surface, mixing by mix in place method with rotavator at OMC

and compacting with vibratory roller to achieve the desired density etc.

121 Providing and laying wet mix macadam base course 250 mm thick in two 178.00 Cum 1331.18

layers using machine crushed B.T. chips as per required gradation mixing with

required optimum quantity of water, conveying the mix to site of work,

spreading in to grade and camber with mechanical paver and consolidation

each layer with vibratory roller including cost of material labour plant and

equipment etc. complete.

122 Compaction and finishing of cement concrete road by trimix process providing 709.00 Sq.m. 63.63

extra labour charges for the trimix vacume dewatering service process on

cement concrete road surface by using vacuum dewatering pump floater

surface vibrator including making groves and rough finish to surface including

leveling etc. complete.

123 Providing and laying homogeneous Grey cement based concrete kerbing of 250.00 Rmt. 370.68

size 30 cm x 30 cm x 10 cm size as per detailed drawing having grade of

concrete M-25 grade, including necessary excavation, BBCC 1:5:10 7.5 cm as

per detailed drawing fixing in line and level, filling joints in C.M. 1:3 with

smooth finished, white washing three coats etc. complete as directed by

Engineer in charge.

124 Providing and fixing to wall, ceiling and floor 10.0 Kg. F/cm2 working pressure 45.00 Rmt. 339.05

polythene pipes of the following outside dia. low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall

ceiling and floor. (G) 110 mm dia.

125 Providing and fixing on Z clamp and floor 10.0 Kg. F/Cm2 working pressure 96.00 Rmt. 666.60

polythene pipes of the following outside dia. low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall

ceiling and floor. (H) 160 mm dia.

126 Providing junction for rain water junction chamber of size 0.60 x 0.60 x 0.75m 5.00 No. 9165.75

with excavation of size 1.96 x 1.96 m & 0.15m thick C.C. 1:2:4 bed concrete

including brick masonary wall in C.M. 1:6 of 0.75m height & 0.23m thick with

15mm thick cement plaster inside & outside & 1.06 x 1.06 RCC (1:2:4) slab of

thickness 0.15m with CRS steel and 0.60m x 0.45m cast iron manhole cover

with frame weight not less than 35 kg as per directed by Engineer-in-charge.

127 Providing and installation Recharge pit of “RAIWOHA” Make 3 layer RCC 1.00 No. 92920.00

Precast Injection well system of size 1.5 meter dia. x 3.4 meter height rain

forced concrete precast three layer module with 6” dia x 12” dia. V wire screen

of 0.75mm x 1.0 mm Slot size in SS 304 material and 1.0 meter height with

MS top cover and required Air vent including all necessary excavation and

transportation at site including required filter media for the recharge system as

per site requirement.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

128 Earthwork for embankment including breaking clods, dressing with all lead 704.74 Cum 165.25

and lift (excluding watering and consolidation) (E) From Borrow area within all

lead and lift.

129 Rolling of earthwork in layers with power roller including filling in depressions 704.74 Cum 22.89

which occur during the process and Watering of earth work as directed.

130 Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 10.00 No. 1212.00

gauge G.I Sheet with extra handle at bottom duly painted white inside and red

out side with FIRE mark. Filled with dry-sand and kept on existing stand

provided or hung on wall hook.

131 Supplying and erecting floor mounting stand for keeping four nos. of FIRE 4.00 No. 6565.00

buckets comprising 1500 mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross supports legs, welded with

hooks and duly painted with one coat of red lead and two coats of approved

enamelled silver paint.

132 Design, Supply and installation of Safety Signage made of Zinc Sulphilde 2.25 Sq.m. 17220.53

based glow in dark , Rigid sheet with High Luminous property enclosed in a

transparent weather proof UV stabilized plastic pasted on 3 mm thick clear

acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE LIFT

DURING FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE

ALARM CALL POINT, FIRE HOSE REEL, FIRE HYDRANT POINT etc.

133 Supply, filling and fixing of approved make ABC type fire extinguisher - 6 Kg. 22.00 No. 2323.00

capacity as per IS:15683 & IS :

134 Supply, filling and fixing of approved make CO2 type fire extinguisher. 22.00 No. 6514.50

Capacity 4.5 Kg. (conforming to IS-15683).

135 Dismentaling doors, windows, ventilators etc. (wood or steel) shutters 19.00 No. 192.41

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift. (ii) Not exceeding 3 Sq.m.

136 Dismentaling tiled of stone floors laid in mortar including stacking of 301.00 Sq.m. 49.41

serviceable materials and disposal of unserviceable materials with all lead and

137 Demolition of terrace including stacking of serviceable materials and disposal 322.00 Sq.m. 65.40

of unserviceable materials with all lead and lift. (i) Brick tile covering.

138 Demolition including stacking of serviceable materials and disposal of 53.00 Cum 1084.30

unserviceable materials with all lead and lift. (i) R.C.C. work.

139 Demolition of Brick work and stone masonry including stacking of serviceable 76.00 Cum 564.16

materials and disposal of unserviceable materials with all lead and lift. (ii) In

Cement Mortar.

140 Dismantling steel work including distempering and stacking the materials with 66.00 Kg. 3.76

all lead and lift.

141 Dismentling C.I. pipes, G.S.W. pipes and A.C. rain water pipes with fittings 15.00 Rmt. 76.96

and clamps including stacking the materials with all lead and lift (for any dia.

142 Dismantling sanitary fittings like wash basin, W.C. pan Indian and European 4.00 No. 415.79

type, flushing tank etc. including stacking the materials with all lead and lift.

Electrical Items

143 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 108.00 Pt. 582.77

(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic / Wooden box, single mounting base

frame covered with textured / metallic / white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose

/ H.D. Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall / ceiling complete Cat. III

It. Rate in

Description of Item Qty. Unit Amount

No. figures

144 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 56.00 Pt. 809.01

are of ISI marked 1.1 kV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured /

metallic / white front plate modules erected on / in wall / ceiling as per pipe

erected with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall /

ceiling complete Cat. III

145 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 31.00 Pt. 309.06

socket erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

146a Providing following type of Modular Type Accessories mounted with PVC / 6.00 Nos. 151.50

metallic / Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge. (1) One No. SP 6 Amp. Cat.III

146b Providing following type of Modular Type Accessories mounted with PVC / 6.00 Nos. 151.50

metallic / Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge. (2) One No 5 pin plug Cat.III

146c Providing following type of Modular Type Accessories mounted with PVC / 9.00 Nos. 160.59

metallic / Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge. (3) Two Pin/RJ-11 Telephone

Socket [A] For One Gang Cat.III

146d Providing following type of Modular Type Accessories mounted with PVC / 32.00 Nos. 160.59

metallic / Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge. (8) Computer RJ-45 socket

146e Providing following type of Modular Type Accessories mounted with PVC / 15.00 Nos. 180.79

metallic / Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge. (9) 16 Amp. SP one way switch

146f Providing following type of Modular Type Accessories mounted with PVC / 15.00 Nos. 199.98

metallic / Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge. (10) 6/16Amp. Universal socket

147 Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI 666.00 Mtr. 104.03

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in / flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

148a Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI 846.00 Mtr. 140.39

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

148b Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI 60.00 Mtr. 184.83

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

148c Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI 150.00 Mtr. 326.23

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

It. Rate in

Description of Item Qty. Unit Amount

No. figures

149e Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi 3.00 Mtr. 70.70

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. (e)

One wire 6.00 sq.mm

149f Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi 45.00 Mtr. 115.14

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. (f)

One wire 10.00 sq. mm

149g Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi 12.00 Mtr. 177.76

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. (g)

One wire 16.00 sq. mm

149h Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi 6.00 Mtr. 295.93

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. (h)

One wire 25.00 sq. mm

150e Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kV 92.00 Mtr. 58.58

grade ISI marked copper wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

150g Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kV 100.00 Mtr. 71.71

grade ISI marked copper wires of following size to be erected as directed. (g)

2.50 Sq.mm 2 core round PVC sheathed

151 Supplying & erecting approved make Telephone Cable electrolytic copper 225.00 Mtr. 20.20

conductor PE insulation twisted in two pairs & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe of following size of

conductors & nos.of pairs with necessary connections. [A] Conductor Size

mm (a) Unarmoured (2) Two Pairs

152 Supplying & erecting approved make LAN cable of following size in existing 800.00 Mtr. 47.47

pipe as per direction [C] CAT -

153 Providing & erecting Switch board for Computer or electric apparatus 32.00 Nos. 1133.22

consisting of following modular type accessories mounted with PVC / Metallic

concealed/ open box with single mounting base frame covered with textured /

metallic/ white front plate, modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

154 Decorative call bell Ting-tong box type 250 volts complete erected. 4.00 Nos. 71.71

155 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 87.00 Nos. 373.70

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513 / CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark / name 160V to 270V, Power Factor more than 0.95, THD <

15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED LED

driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.

shown) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV, IP-

20, conventional 4 feet Cat.III

It. Rate in

Description of Item Qty. Unit Amount

No. figures

156 Supplying and erecting led lamps with following wattage capacity of 220 to 9.00 Nos. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable

LAMP holder (ii) 5 to 8 watts Cat-III

157 Supplying and erecting LED street light / Flood light fittings with High power 41.00 Mtr. 4248.06

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark / name engraved or embossed 160 to 270 V,

Power Factor more than 0.95, THD < 10%, CCT 3000 K to 5700K,Uniformity

ratio > 0.45, Luminaire efficacy > 100 lumens/watt. LED driver efficiency >

85%. (fittings required LM-79 & LM-80 certificates) (NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer

Street Light (IP-65), Surge protection -4KV integral and light must have

440VAC line supply with over-voltage protection. (ii) 48 - 59 Watts Cat-III

158 Supplying and erecting LED Solar street lights with High power White LEDs 4.00 Mtr. 21364.53

wattage of 1Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved

or embossed with 36 hours battery backup & MPPT 24V, 7.5 A charge

controller with 12 hours automatic switch on/off with wind speed resistance

m/s as per IEC 61215 (C) 21W, IP-65, PV Module – 100W and 5 mtr poles

complete erected.

159 Providing and erecting Approved make Four pole moulded case circuit 2.00 Nos. 6790.23

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with fixed thermal & magnetic release

suitable to work on A.C. supply 50 Hz. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only Cat III

160 Providing and erecting Approved make Four pole moulded case circuit 4.00 Mtr. 8861.74

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with fixed thermal & magnetic release suitable to work

on A.C. supply 50 Hz. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

161 Providing and erecting Approved make Four pole moulded case circuit 2.00 Nos. 17843.67

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to work

on A.C. supply 50 Hz. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing ICS=100% of ICU only Cat III

162 Providing and erecting Approved make Earth fault Relay suitable to mount 2.00 Nos. 5482.28

with inter connection suitable to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along with shunt trip 220V AC.

with all internal connections & complete erected in existing M.S. housing. (2)

125 A -200 A, CT Ratio 1/200

163 Supplying & erecting approved make Four Pole 415V change over switch 2.00 Nos. 12241.20

interior for panel mounting with operating mechanism A.C.23 duty confirming

to IS for (D) 200A Cat-lll

164 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 3.30 Mtr. 3202.71

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports / insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

165 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system 31.00 Nos. 297.95

and having breaking capacity 10 KA to be erected in existing box confirming

to IS 8828/1996 with ISI Mark Cat-III.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

166 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable 106.00 Nos. 123.22

to operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box confirming to IS 8828/1996 with ISI Mark Cat-III

167 Providing & erecting 240 V MCB double pole switch for motor & inductive load 3.00 Nos. 362.59

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Cat-III

168b Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 17.00 Nos. 736.29

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b) 40 Amp. Cat-III

168c Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 1.00 Nos. 811.03

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (c) 63 Amp. Cat-III

169a Providing and erecting Sheet Steel powder coated MCB distribution board - 2.00 Nos. 1492.78

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of same company of

MCB to be used) suitable for (A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-43) (iv) 12 way

169b Providing and erecting Sheet Steel powder coated MCB distribution board - 5.00 Nos. 2913.85

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of same company of

MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing per phase isolation type (PPI) (b) sheet steel double

door (ii) 6 way

170 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 17.00 Mtr. 2458.34

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V, 50 Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component for following Max. rating erected as directed (ii)

Amps. DP Cat. III

171 Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. 15.00 kg 794.87

172 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. 19.00 Nos. 368.65

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire.

173 For using salt and charcoal / coke as required for pipe type earthing. 19.00 Nos. 171.70

174 Supplying & erecting earth pit of minimum bore dia.150mm size approved 3.00 Mtr. 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A) (approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity :- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop :- < 1 volt at no load & dry form, Sulphar content :- < 2% (C)

Back fill Compound :- Earthing compound should be capable to retain

moisture for long time necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

175 Providing & erecting weather proof, dust & vermin proof, floor mounted front 4.70 Nos. 10468.65

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories, supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses / MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy duty end terminal

connection, danger notice board, necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size. (A) locally fabricated panel board (i) with

350 mm depth

176 Providing, erecting, fabricating the M.S. structure as per requirement on site 47.00 kg 77.77

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing complete.

177c Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 80.00 Mtr. 341.38

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core

Sq.mm (25 Sq.mm 1/2 core)

177d Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 30.00 Mtr. 454.50

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core

Sq.mm (35 Sq. mm 1/2 core)

177g Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 120.00 Mtr. 876.68

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core

150 Sq.mm (70 Sq.mm 1/2 core)

177g Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 50.00 Mtr. 1085.75

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core

185 Sq.mm (95 Sq.mm 1/2 core)

178b Providing and erecting FRLS-XLPE (IS:7098) (I)-88 ISI armoured cable 775.00 Mtr. 151.50

multistrand /Solid Aluminium conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (B)

core 6 Sq.mm

178c Providing and erecting FRLS-XLPE (IS:7098) (I)-88 ISI armoured cable 80.00 Mtr. 168.67

multistrand /Solid Aluminium conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables (C)

core 10 Sq. mm

179 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 735.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

180a Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or 100.00 Mtr. 74.74

required depth for laying any size of cable or locating the fault all over the run

and back filling the same and making the surface as normal ground.

180b (B) If additional machinery like hammer driller or JCB use [Add] 25.00 Mtr. 357.54

181 Providing & laying approved make Double walled corrugated pipes (DWC) of 735.00 Mtr. 62.62

polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for laying of

cable below ground / road surface for enclosing cable (A) 50 mm outer dia

It. Rate in

Description of Item Qty. Unit Amount

No. figures

182 Providing and fixing heavy duty flange type brass cable gland with rubber ring 62.00 Mtr. 38.38

for PVC insulated armoured cable complete with out going tails, insulating

tape etc. for following size of cables. (B) 2 to 4 core 6 Sq. mm

183c Providing and fixing heavy duty flange type brass double compression type 2.00 Mtr. 103.02

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc. for following size of cables. (C) 3 & 1/2

core 70 Sq.mm

183f Providing and fixing heavy duty flange type brass double compression type 2.00 Mtr. 190.89

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc. for following size of cables. (F) 3 & 1/2 core

183g Providing and fixing heavy duty flange type brass double compression type 2.00 Nos. 238.36

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc. for following size of cables. (G) 3 & 1/2

core 185 Sq.mm

184a Solder less crimping type Aluminium lugs conforming to IS suitable for cable 248.00 Nos. 6.06

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass / cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

184e Solder less crimping type Aluminium lugs conforming to IS suitable for cable 8.00 Nos. 25.25

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass / cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

184h Solder less crimping type Aluminium lugs conforming to IS suitable for cable 8.00 Nos. 61.61

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass / cadmium plated nut bolts in an approved

manner. (H) 150 Sq.mm.

184i Solder less crimping type Aluminium lugs conforming to IS suitable for cable 8.00 Nos. 80.80

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass / cadmium plated nut bolts in an approved

manner. (I) 185 Sq.mm.

185 Providing and erecting Approved make Ceiling fan with double ball bearing ISI 56.00 Nos. 1596.81

mark with condenser A.C. 230V.50 Hz.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

186 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 56.00 Nos. 108.07

down rod erected duly painted for fan complete with proper insulation without

leakage and earthing.

187 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC 56.00 Nos. 43.43

slab with Making the site as original.

188 Supplying & erecting single phase approved make industrial exhaust fan 8.00 Nos. 2054.34

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM [A] 300-

305 mm dia 900 RPM Cat.II

189 Supplying and erecting approved make Octagonal pole made from HR sheet 27.00 Nos. 7561.87

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mm x 7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer considering site

requirement. (C) 5 Mtr. Long 70 mm top x 130 mm bottom dia, 3 mm

thickness with 200mm x 200mm x 12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts. Approx Pole weight 46 kg

190 Supplying & erecting approved make SMC press moulded composite FRP 8.00 Nos. 476.72

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector

strip 5way (3P+N+E), DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps & earth bolt of

following size of box. (C) 150mm x 125mm x 100mm [deep]

It. Rate in

Description of Item Qty. Unit Amount

No. figures

191a Supplying and erecting Street light pole bracket comprising main B Class GI 13.00 Nos. 491.87

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for 76.5mm / 80mm / require size

of pole top having nuts and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with one coat.of Red

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm bracket 0.5 Mtr

191b Supplying and erecting Street light pole bracket comprising main B Class GI 10.00 Nos. 622.16

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for 76.5mm / 80mm / require size

of pole top having nuts and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with one coat.of Red

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [B] Double Arm Bracket 0.5 Mtr

192 Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm 8.00 Nos. 343.40

long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on

wall or corner for mounting street light luminaire with necessary hardware

materials duly painted.

193 Supplying & erecting IP 55 grade following size section pillar fabricated from 1.00 Nos. 3595.60

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally supported on

both side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside

and out side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (B) 75 x 60 x 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 x 35 x 5 mm thick

194 Supplying & erecting approved make Digital time switch having lithium cell 6 1.00 Nos. 3168.37

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

195 Supplying & erecting power contactor, AC3 duty for time switch complete 1.00 Nos. 2782.55

erected as per direction Cat III (D) 4 pole 440V 40 Amp.

196 Supplying & erecting Amplifier having following specification: 1.00 Nos. 13558.24

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by wrong

Battery Polarity connections. [Approved by Competent Authority i.e. not Below

the rank of Executive Engineer]

197 Supplying and erecting wall mount speaker with rated power of 30 watt/power 4.00 Nos. 3083.53

tapping 30/15/7.5 watt available, opening angle 180 degree H * 77 degree V,

sound pressure level 88 dB, frequency response of 70Hz to 20KHz [Approved

by Competent Authority i.e. not Below the rank of Executive Engineer]

It. Rate in

Description of Item Qty. Unit Amount

No. figures

198 Providing and erecting cordless microphone with UHF Diversity handheld 2.00 Nos. 6163.02

wireless microphone / caller wireless complete with receiver and transmitter

unit, Cardiod, polar pattern, dynamic microphone, LCD display for battery and

frequency status and information, 32 preset channels,with compatible groups

of 8 channels, 14 hrs.battery life,frequency response 80Hz to 18KHz., RF

sensitivity <1.0 Uv,image rejection > 55 dB,dynamic range >95 dB and

receiver having 32 channels, S/N ratio>100 dBA, Dynamic range>95 dB,

distortion<1% [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer]

199 SITC of 3LCD Lamp based projector having wxga (1280 x 800) or better 2.00 Nos. 33895.60

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum 1HDMI,1VGA

input. Having contrast ratio of 15000:1 or more. the projector should have

auto vertical key stone correction of +/- 30 degree and Manual Horizontal of +/-

30 degree. the projector should have optical lens, throw ratio 1.30-1.56:1.

Zoom Factor of 1.2. Lens focus Manual having focal length 16.9mm to

20.28mm. projector should have features like AV mute slide, quick corner and

split function and should support wireless functionality with inbuilt wifi or wifi

dongle. [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer]

200 SITC of 100 inch Self Lock MW (7 x 5) Instalock Slow Retraction Screen, 2.00 Nos. 3810.73

Aspect Ratio-4:3 [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer]

201 Providing and erecting Inverter based approved make split air-conditioning 12.00 Nos. 79620.32

unit consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain PVC pipes

suitable for (cost includes Eco Friendly green gas charging and 15A plug top

& Remote Control & MS Stand) with necessary core cutting. (2) For ISEER

Range (KWH/KWH) (4.0 to 4.49) (C) for 1.7 to 2 ton capacity - Premium Cat.

202 Supplying and erecting insulated pair of soft copper tubing open or concealed 120.00 Nos. 1158.47

including power and control cable, necessary PVC drain pipes for

Split/Cassette AC machine up to 4 TR capacity.

203 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 2.00 Nos. 61482.74

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel and ISI Certified.

204 Supplying & erecting reverse osmosis (RO) water purification system with 2.00 Nos. 77891.20

M.S. powder coated pedestal frame, prefilter housing carbon filter suitable

buster DC pump, auto low & high pressure switches with following size of LPH

capacity & erected as directed [D] 100 LPH with 1 phase / 3 phase Raw water

pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter

10" x 54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure

pump 500LPH @ 10kg/cm2 - (1 No - Shimge /CRI /Lubi), RO Membrane

housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x 1E - (1

No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%

205 Supplying and erecting approved make online Un-interruptible Power Supply 2.00 Nos. 270989.06

system comprising flat cum-boost charger with IGBT base rectifier & Inverter

& sealed maintenance free SMF batteries. The charger having operating

capacity for input 160-270V AC & inverter having output 230V, 50 Hz Ac with

0.8 load power factor with battery, over/under voltage output with over load &

short circuit protection equipment. The system housed in CRC sheet duly

powder coated paint with following power backup.with MS painted batteries

stand, 10% Overload capacity for momentary load. (I) 10 kVA 3 - phase with

1Hr Backup

It. Rate in

Description of Item Qty. Unit Amount

No. figures

206 Supplying and erecting approved make panel mounting type Digital Voltmeter 3.00 Nos. 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing

panel board with all connection, wiring etc. with manufacturers calibration

certificate.

207 Supplying and erecting approved make panel mounting type Digital Ammeter 3.00 Nos. 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC, erected on existing panel board

with all connection, wiring etc. with manufacturers calibration certificate.

Supply 500 V on existing panel board with necessary connections.

209 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 9.00 Nos. 274.72

ratio 15 VA burden erected in existing CRCA box duly secured with insulating

materials connected to the meter

210 Supplying and erecting approved make suitable panel indicator LED type 9.00 Nos. 43.43

lamp, lens cover, complete erected with necessary connections.

211 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 4.00 Nos. 9416.23

1000 mm long. Air Termination Base tested for conditioning, Ageing Test &

Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an

accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1

protocol with MAST 34mm dia 3000 mm long- Cold Galvanized.

212 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and 80.00 Nos. 299.97

tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party

laboratory to meet the requirement of IS/IEC 62305 with Required

Accessories - Aluminium Holding clamp at every 1 mtr distance,

Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion

piece with connectors at every 20 mtr distance, Aluminium straight Splicer to

connect conductors. All Accessories should be tested as per IEC 62561-1

2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse

current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test)

conducted in a sequence manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC

213 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode 80.00 Nos. 154.53

directly in ground as required. Zinc coating: 500 g/m square (Approx :

micron coating) tested and used exclusively for lightning protection earthing

system and ring equipotential bonding.

214 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode 4.00 Nos. 5992.33

with 250 micron copper bonding & 1 bag of Carbon fill Based environment

friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and

suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy

duty weather proof Polyethylene Earth Pit Chamber with following dimensions

:254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

215 Supply, Installation, Testing & Commissioning of following size of Grid Tied 17.00 PER 42455.35

Solar Power Plant with KW.

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient of the PV module

shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty. Modules must be

complied to the DCR(Domestic content requirements). The Ration of AC to

DC is 5:6 for the Installation capacity which are given in AC KW.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

Solar Inverter : MPPT Range: MPPT Range: 80-1000 V, Max efficiency: Mtr.

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p

Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C,

Integrated protection of Inverter are Anti-islanding Protection, Input Reverse

Polarity Protection, Insulation Resistor Detection, Ground fault protection,

Residual Current Monitoring Unit, Output Over Current Protection, Output

Short Circuit Protection, Output Over Voltage Protection, PV array string fault

Protection. Protection Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output

Over Current Protection Integrated, Output Short Circuit Protection Integrated,

Output Over Voltage Protection Integrated, Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: The mounting (Rectangular pipe / square pipe / circular

pipe) with requisite cross bars, nuts and bolts, etc. shall be Hot deep

galvanized with minimum 80micron coating. The Rectangular / square /

circular hollow pipe section used for the structure should have a minimum

thickness of 2.0 mm. other than above, the material thickness should be

minimum 2.5 mm. A certificate of a structural engineer certifying the strength

and stability of the mounting structure to withstand the weight and wind speed

of 150 km/hour, shall be submitted by the vendors. Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for foundation,

solar panel mounting, the structure should be suitable for carry the load of

solar panel,wiring, sprinkler system etc. with necessary foundation work/wall

mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture

should be (SS 304) quality. The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM x 40MM

b. Rafter - The minimum section (thickness) should be 60MM x 40MM

c. Purlin - The minimum section (thickness) should be 40MM x 40MM Balane

of System with necessary Swichgears (Suitabel size and protection of ACDB

& DCDB), inter connecting wiring, earthing system as per the CEIG drawing

lightining arrester system as per the CEIG drawing approval, all liasoning work

with various Govt. Department like State nodal agency, DISCOM & CEIG is

included in agency scope (Excluding all charges namely GEDA Application

fees, Solar connectivity charges, Meter connectivity Charges, Meter testing

charges and system stability/strenthning charges) (C) Grid Tied Solar Power

System: 11 - 25 kW (3 - phase)

216 Providing & erecting Automatic solar panel cleaning system for solar power 17.00 PER 1841.23

projects which includes necessary plumbing work (UPVC pipes and KW.

accessories) from source of water to project site (up to 30 meters), Suitable

size of sub mercible/ open well motor, necessary wiring for motor and

sprinkler system with safety, timer circuit for automatically on/off the sprinkler

system, necessary size oand number of nozzles / JET (minimum 1 Nozzle/Jet

per module). (C) 11KW-20KW Cleaning System.

TOTAL Rs.

i.e. Rs. Three Crore Twenty Nine lacs Ten thousand Nine hundred Two and Seven paisa only.

Credit for dismantalled materials of amount of Rs. 1,78,100.00 must be recovered from 1st R.A. bill of Contractor's.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

It. Rate in

Description of Item Qty. Unit Amount

No. figures

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

6. Credit for dismantalled materials of amount of Rs. 1,78,100.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Vyara (R & B) Sub Division, Tapi (R & B) Division, Tapi (R & B) Division,

Vyara Tapi Tapi