NIQ-36- (EL) of 2026-2027

SITC of PTZ Dual Camera with One Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 30X Zoom and 8x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree & One Panoramic Camera min. 85 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio in and can be controlled via RS232 and IP. Should support multiple video streams with PIP. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE+ and Virtual USB Driver. Camera can be controlled and managed through centralised software on network. Quoted model should be BIS, CE, FCC, Click share & RoHS Certified with Test Lab Reports.

SITC USB PTZ Camera with Full HD 1080p signal output format with a high frame rate of 60 fps , 12x optical zoom is applicable for a medium size conference room, Equipped with a Sony 1/2.8 inch image sensor, Viewing Angle: 74°(H) 82°(D), USB 3.0 and HDMI video output interface, USB 3.0 Plug & Play and compatible with Windows, Linux, MAC OSX, Chrome OS, Wide range Pan/Tilt/Zoom actions: Pan angle from -100° to +100°; tilting angle from -30° to +30°, Up to 128 user-defined preset modes to allow for ease of use in all environments, Free Lumens Control Software for controlling the cameras without a joy stick controller, Zoom Certified USB Camera

SITC of 163" COB Panel Based Indoor Active LED Display. Physical Parameter-LED Type Flip-Chip COB, Pixel Pitch (mm) 1.56, Panel Dimensions (WxHxD)/(mm) 600x337.5x39.3, Pixel Per Panel 384x216, Panel Weight (kg) 4.4, Panel Material Die Casting Aluminium, Module Dimensions (WxH)/(mm) 150x168.75.Optoelectronic Parameter- Brightness (nit) 800, Refresh Rate (Hz) 7680, Greyscale Bit)-14, Contrast Ratio 15000:1, Colour Temperature (K) 6500, Viewing Angle (H/V) (°) 160/160 Driving Type 1/54, AC Operating Voltage (V) 100～240, Power Consumption (Max./Avg.)(W/m²) 326/109, Heat Generated (Max./Avg.)(BTU/h/m²) 1113/372 , Application Parameter- Storage Temperature (℃) -40～+60, Operating Temperature (℃) -10～+40,Storage Humidity (RH) 10%～85%, Operating Humidity (RH) 10%～80%, IP Rating (Front/Rear) IP40/IP21, Module Maintenance Front, PSU & Others Maintenance Front, Panel Installation Type Fixed, Max Rigging, Certificate required- CCC, CE, ETL, FCC, UKCA

SITC of all-in-one controller, supports multiple operating modes (video controller, fiber converter, bypass mode) and has six Ethernet ports.Up to 5 input connectors, including: 2x HDMI 1.3,1x DVI port, 1x optical fiber port (OPT1), 1x 3G-SDI (IN & LOOP), Support 3 x layers, Low latency, Audio input and output, Self-adaptive OPT 1 for either video input or sending card output, Powerful video processing, Up to 10 user-defined presets supported, Mosaic input source supported, Up to 4 units cascaded for image mosaic, All-round color adjustment.Input Connectors- HDMI 1.3 DVI OPT 1, Bit Depth-8-bit- RGB 4:4:4 1920×1200@60Hz (Standard) Output Connectors- Connector- Ethernet- 6 nos. Gigabit Ethernet ports Control Connectors- ETHERNET- 1 No. Connect to the control PC or router USB- 2 Nos.- USB 2.0 (Type-B): Input connector for device cascading, USB 2.0 (Type-A): Output connector for device cascading GENLOCK IN- LOOP- 1 No. Connect to an external sync signal. IN: Accept the sync signal. LOOP: Loop the sync signal.

SITC of table stand with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better.

SITC pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 DBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better.

SITC of wireless handheld microphone system with a dynamic cardioid microphone capsule, comprising a wireless receiver and handheld transmitter. The system shall feature automatic frequency scanning and synchronization, stable wireless transmission, a frequency response of 80 Hz–16 kHz, a minimum signal-to-noise ratio of 100 dB(A), balanced XLR and unbalanced audio outputs, and a battery operating time of at least 8 hours.

SITC of 12 x 8 Networked Digital Signal Processor With AEC; Should have 12 or more floating AEC in group of 4 or more Channels; DSP with 12 inputs and 8 outputs or more; 12 Control Inputs and 6 Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: <0.01% 20Hz to 20KHz; Crosstalk: <-75dB orbetter; Open architecture software configurable; Separate logic processing power; 2 digital audio bus RJ45 Port; 1 Ethernet port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine filters; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc.

SITC of 8x8 channel USB Audio Bridge. It should capable to transfer Minimum 8 Input ormore and 8 output ormore digital audio channel to DSP from any PC or Mac. Should support variable DIP switch settings for audio channel assignment; Sample Rates: 48kHz, 96kHz orbetter; To avoid any compatibility issue(s), it has to supplied by the same OEM of above digital Signal Processor; etc.

SITC of 8 Channel analog Mic/Line Level input expansion Unit; Should be supplied by the same OEM of above DSP unit, to avoid any compatibility issue(s) during installation and/or post installation; Should have 2 x RJ45 digital audio Bus Port; Phantom power on all Inputs; Configurable gain control at all inputs; etc.