making Chabutro Under MP/Mla, Councilours budjet at bopal-ghuma, ward south west zone(Reinvite).

Name of Work: - Construction of Chabutro Under MP,MLA,Muni.councilors,Mayor and

Any budget of Bopal ghuma Area in south west zone.(A.R.C- Reinvite)

*Special condition of contract for Item_(Providing and laying of interlocking grey paver

blocks unishape of high density 60 mm thick...)mentioned in Technical volume.

● Successful bidder of this tender shall have to purchase 50% of total quantity of paver block

from Amdavad Enviro Projects Pvt. Ltd. The paver blocks shall be as per tender BOQ & tender

specifications. Payment of such 50% Quantity shall be made to Amdabad Enviro Projects

Pvt.Ltd. directly by the successful bidder on mutual agreement of rate between successful

bidder & Amdabad Enviro Projects Pvt. Ltd. AMC shall not be responsible for any kind of dispute

between Amdabad Enviro Projects Pvt. Ltd. & successful bidder or this tender. The successful

bidder will be paid by AMC as per tender BOQ item rate + premium.

● The quality, size, shape, compressive strength & other technical parameter of paver Block

shall be as per IS standards & tender specification and shall be completely successful bidder's

responsibility.

● If in case of failure of paver Block or if Paver Block are not as per the standards, the same shall

be rejected. Successful bidder shall remove such failed paver blocks immediately form site and

fix new paver blocks as per standards.

● The successful bidder shall produce a certificate /bill from Amdabad Enviro Projects Pvt. Ltd.

showing quantity of Paver Block which should be minimum 50% of total quantity.

1. All the relevant causes mentioned in the Tender which are related to above clauses shall be

read as mentioned in above AMENDMENT.

2. The above Amendment shall be Part of Tender document & shall be bound to Contractor and

shall be submitted along with other tender documents with duly signed and stamped.

Seal and signature of the bidder Additional City Engineer

Date :- AHMEDABAD MUNICIPAL CORPORTION

Tender Fee : Rs 900.00 Date of submission : 25.05.2026 Time: :18:00 Hrs

Earnest Money : Rs. 9880.00 Date of Opening : 26.05.2026 Time: 17:00 Hrs

Contractor’s Name & Address :

Name of Work :- Construction of Chabutro Under MP,MLA,Muni.councilors,Mayor and

Any budget of Bopal ghuma Area in south west zone.(A.R.C- Reinvite)

Sr. Rate Amount

Quantity Item Description Per

Brick work using common burnt clay

building bricks having crushing strength

1 10.00 not less than 35 kg./Sq.Cm. in foundation 4011.66 Cmt .

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B)Conventional

Extra rate over item of excavation 0.20 to

0.30 meter (By any type of Breaker

2 35.00 Machine or R.C.C.Cutter machine 177.76 Sq.m

including cost of operator, fuel, &

transportation etc complete.

Excavation for foundation upto 1.5 m

depth including sorting out and stacking

3 52.00 of useful materials and disposing off the 115.92 Cu.M.

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Providing and laying cement concrete

1:4:8 (1-Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mm nominal

size) and curing complete excluding cost

of formwork in (A)

Foundation and Plinth

Filling in foundation and plinth with

murrum or selected soil in layers of 20cm.

thickness including watering, ramming

and consolidating etc. complete.

Conveyance charge of lime , murrum,

building rubbish, earth manure or sludge,

and excavated earth and fly ash upto lead

7 4.00 Providing and fixing SS 304 Pipe 2750.00 Rmt

Providing and fixing Tata Blue Scope

8 24.00 Colourbond Ultra Steel Corrugated Total 883.58 Smt

Painted Thicknss 0.85mm G.I. Sheets

Granite Takhti for Couenslor's Name and

details to be engraved as directed by the

Engineer In Charge. Size of the Takhti

would be 2 ft x 1 ft.

MS work : Providing, fabricating,

assembling, hoisting/ erecting and fixing

in position at all heights/ all levels/ all

floors/ all shapes & sizes with all leads &

lifts using MS Rolled Steel Sections,

Hollow sections, Tubular Sections, MS

Plates, Chequered Plates, MS Pipes,

Perforated Sheet, Flats, Bright Bars,

Angles, MS Sheet, Girder, Beam, cattle

trap. deep threaded MS bolts, threaded J

bolts, insert plate, support plate etc as per

drawing. all confirming to latest relevant

IS codes for the work of steel structures

like staircases, railings, handrail, jali,

gates, grills, bracings, platforms, brackets,

monkey ladder, cattle trap, windows, pipe

10 150.00 rack, rungs, false ceiling frame work, Roof 105.85 kg

canopy, fencing posts, M.S. Screen &be

get approved from the consultants before

procurement of material by the

contractor. Work shall carried out as per

the approved sample. Any change

required in the fabrication drawings shall

be carried out at No extra cost.

Fabrication shall be in a perfect

architectural workmanship manner and as

provided in section V & VI of IS 800 & IS

7215.Welding shall be carried out by

qualified welders/ fabricators.It should

also include the cost of necessary

scaffolding/ staging, zinc coated nut-bolt

as required for safety, structural stability

of all works at site.All product Make

approved as per tender and architect

Applying priming coat over new steel and

11 34.00 other metal surfaces after and including 417.82 Sqm

preparing the surface by thoroughly

Providing and fixing ornamental design

12 5.00 decorative C.I. Garden / Casting benches 8500.00 No.

including painting with synthetic

P&L 24"x24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 (1 cement : 6 coarse

sand) on new surface or fixing on existing

flooring by adhesive material including

dismentaling of existing flooring and

jointed with color cement slurry including

finised with flush pointing & cleaning the

surface etc. complete for antiskit (upto

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of

single or half brick walls for interior

14 64.59 plastering upto floor two level and 92.63 Smt

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) etc.

complete as directed.

Providing & Fixing of FRP Chabutro, 400 125000 No.

GSM Matt, Surface Matt, Resin, Gel Coat,

Dye Moulding, Fiber Reinforcement

Plastic, Dye Moulding and Assembling. Dia

: 18", Height : 12½', Bird Feeder : 2.5' x

2.5' Square Shaped, 4 supporting pillars.

M.S. Pipe 75 mm dia, 6' Height,

Reinforcement of FRP Chabutro

Foundation Pipe. CC work for foundation

of Chabutro as per requirement, Brick

Work and Plaster 5' x 5', height 1', Steel

Work welded in built up sections frame

using 50x25 mm MS Verticle pipe.

16 6.00 Horizontal Pipes of 25 mm round shape of

4 ft height to be fitted in the horizontal

pipe after doing hole in horizontal pipe

and dong welding work. 4 Vertical Pipes of

50 mm x 50 mm square shape to be fitted

in four corners of the platform area and

the fifth pipe of 50 mm x 50 mm square to

be fitted with the gate at entry area. work

including cutting, hoisting, fixing in

position, grinding and cleaning. Good

quality synthetic base auto paint. Granite

Takhti of 2 ft x 1 ft to be fitted after

preparing MS frame and welding to the

vertical and horizontal pipes.

(in words also)

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

MJ. ©e <w»tth œuNbwF CJl, NuÕce ntuMvexj vtmu, fKtoJ<e ¾jc mtbu, yum.S. ntRJu, stu^vwh, ybœtJtœ-

Municipal Commissioner invites Percentage Rate sealed tenders from interested contractors .

1 Name of work Construction of Chabutro Under MP, MLA, Muni.councilors,

Mayor and Any budget of Bopal ghuma Area in south west

2 Time Limit 12 Months

3 Eligibility Criteria Register “E-2” class in PWD in Govt. R&B/CPWD/AMC or equivalent registration

with any other state Govt. or institutions.

4 Estimated Cost put to tender Rs.

5 Earnest Money Deposit Rs.9,880.00 (Demand Draft, Pay order, Bank Guarantee (As per finanance circular

No 56) or Cheque in favour of Municipal Commissioner, Ahmedabad) To be

submitted as prescribed in 7.0 below. Demand Draft or Bank Guarantee shall be

from Nationalized Bank and valid for 120 days.

6 (A) Security Deposit: 5% of Tender Amount

(B) Retention 1. @ 2% of the value of work done will be deducted from each RA bill. It will be

released along with release of payment of Final Bill.

7 Tender fees Rs.900/-Demand Draft / Pay order in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

8 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with Tender as

Tender Fees described in the invitation of tender and submitted to Assistant Manager (South

West zone) , Ahmedabad Municipal Corporation, Late Shree Tushar Deshmukh

Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway, Jodhpur,

Ahmedabad-380015

9 Tenders issue date Tenders from the website http://amc.nprocure.com and http://nprocure.com. shall

be down loaded from

10 Last date of receiving Dt. 25/05/2026 up to 18:00 Hrs The tenders received after this date and

Tenders. time will not be entertained under any circumstances.

11 Date of Opening Dt.26/05/2026 at 17.00 Hrs to Assistant Manager "South west Zone Shree

Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway,

Jodhpur, Ahmedabad-380015

12 Mode of sending the Tender Document shall be submitted in sealed envelope systems By RPAD/ Speed post/

Documents Hand Delivery/ Courier in sealed covers as described in submission of the tender.

13 Terms, Condition, & All general condition of contract of Form B1 condition of contract shall be

Specification applicable.

14 GST ltKtk Ftðþ vhevºt lkch - 31, yb>tJt> BGþrlrm5j ftuvtuohNl btk Ítulj ytuVem / v.J.yu. / «tusu¾x rJCtd îtht htuz / rcÕz´d/jtEx/c{es Ft<tytu îtht cnth

vtzJtbtk ytJujt xuLzh suLþk mcbeNl <t.01-07-2017 vAe fhJtLþk &tg Au, <uJt <btb xuLzhtubtk <&t nJu vAe cnth vtzJtbtk

<t.07-07-2017 Bþsc ytJlth Wvhtuf< rJCtd/Ft<tltk <btb xuLzhtubtk (bxehegj + juch mÃjtg mt&u) GSTlt ltuxeVefuNl Bþsc GST sgtk jtøþ vz<tu

ntug ðgtk, m>hnwk ftblt Bidder yu GST ltuxeVefuNl Bþscle yuÃjefucejexe ægtlbtk htFelu huxLþk cez´d fhJtLþk hnuNu.

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or all the

tenders without assigning any reasons thereof.

Seal and Signature of the Bidder Addl. City Engineer

(South West Zone)

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

SOUTH WEST ZONE

DETAILS OF BANK ACCOUT

1 Contractor's name

3 Telephone/ mobile no.

4 Permanent account no. (PAN

5 Name of the bank

6 Branch name and address

11 Contractor/ supplier's

signature and stamp

SPECIFICATIONS OF MATERIALS – CIVIL

This section gives detail specifications for mainly used materials, for other materials refer Building Specifications.

For materials relevant specification of Building Specification shall apply.

TECHNICAL SPECIFICATIONS

NAME OF THE WORK Construction of Chabutro Under MP, MLA, Muni.councilors, Mayor

and Any budget of Bopal ghuma Area in south west zone.(A.R.C)

Item No.1 : Brick work using common burnt clay building bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Item No.2 : Extra rate over item of excavation 0.20 to 0.30 meter (By any type of Breaker Machine or

R.C.C.Cutter machine including cost of operator, fuel, & transportation etc complete.

Extra rate over item of excavation 0.20 to 0.30 meter (By any type of Breaker Machine or

R.C.C.Cutter machine including cost of operator, fuel, & transportation etc complete.

Item No.3 : Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Item No.4 : Providing and laying cement concrete 1:4:8 (1-Cement : 4- coarse sand : 8- hand broken

stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in

Foundation and Plinth

Brick Providing and laying cement concrete 1:4:8 (1-Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mm nominal size) and curing complete excluding cost of

formwork in (A)

Foundation and Plinth

Item No.5 : Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete.

Item No.6 : Conveyance charge of lime , murrum, building rubbish, earth manure or sludge, and

excavated earth and fly ash upto lead of 5.00 Kms.

Conveyance charge of lime , murrum, building rubbish, earth manure or sludge, and

excavated earth and fly ash upto lead of 5.00 Kms.

Item No.7 : Providing and fixing SS 304 Pipe

Providing and fixing SS 304 Pipe

Item No.8 : Providing and fixing Tata Blue Scope Colourbond Ultra Steel Corrugated Total Painted

Thicknss 0.85mm G.I. Sheets

Providing and fixing Tata Blue Scope Colourbond Ultra Steel Corrugated Total Painted

Thicknss 0.85mm G.I. Sheets

Item No.9 : Granite Takhti for Couenslor's Name and details to be engraved as directed by the

Engineer In Charge. Size of the Takhti would be 2 ft x 1 ft.

Granite Takhti for Couenslor's Name and details to be engraved as directed by the Engineer

In Charge. Size of the Takhti would be 2 ft x 1 ft.

Item No.10 : MS work : Providing, fabricating, assembling, hoisting/ erecting and fixing in position at

all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled

Steel Sections, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes,

Perforated Sheet, Flats, Bright Bars, Angles, MS Sheet, Girder, Beam, cattle trap. deep

threaded MS bolts, threaded J bolts, insert plate, support plate etc as per drawing. all

confirming to latest relevant IS codes for the work of steel structures like staircases,

railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle

trap, windows, pipe rack, rungs, false ceiling frame work, Roof canopy, fencing posts,

M.S. Screen &be get approved from the consultants before procurement of material by

the contractor. Work shall carried out as per the approved sample. Any change required

in the fabrication drawings shall be carried out at No extra cost. Fabrication shall be in a

perfect architectural workmanship manner and as provided in section V & VI of IS 800 &

Welding shall be carried out by qualified welders/ fabricators.It should also include the

cost of necessary scaffolding/ staging, zinc coated nut-bolt as required for safety,

structural stability of all works

MS work : Providing, fabricating, assembling, hoisting/ erecting and fixing in position at all

heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel

Sections, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes,

Perforated Sheet, Flats, Bright Bars, Angles, MS Sheet, Girder, Beam, cattle trap. deep

threaded MS bolts, threaded J bolts, insert plate, support plate etc as per drawing. all

confirming to latest relevant IS codes for the work of steel structures like staircases, railings,

handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap,

windows, pipe rack, rungs, false ceiling frame work, Roof canopy, fencing posts, M.S. Screen

&be get approved from the consultants before procurement of material by the contractor.

Work shall carried out as per the approved sample. Any change required in the fabrication

drawings shall be carried out at No extra cost. Fabrication shall be in a perfect architectural

workmanship manner and as provided in section V & VI of IS 800 & IS

Welding shall be carried out by qualified welders/ fabricators.It should also include the cost

of necessary scaffolding/ staging, zinc coated nut-bolt as required for safety, structural

stability of all works

Item No.11 : Applying priming coat over new steel and other metal surfaces after and including

preparing the surface by thoroughly

Applying priming coat over new steel and other metal surfaces after and including

preparing the surface by thoroughly

Item No.12 : Providing and fixing ornamental design decorative C.I. Garden / Casting benches

including painting with synthetic

Providing and fixing ornamental design decorative C.I. Garden / Casting benches including

painting with synthetic

Item No.13 : P&L 24"x24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 (1 cement : 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc. complete

for antiskit (upto 10 ton)

P&L 24"x24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar

1:6 (1 cement : 6 coarse sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete for antiskit (upto

Item No.14 : Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand) etc. complete as directed.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand) etc. complete as directed.

Item No.15 : Providing & Fixing of FRP Chabutro, 400 GSM Matt, Surface Matt, Resin, Gel Coat, Dye

Moulding, Fiber Reinforcement Plastic, Dye Moulding and Assembling. Dia : 18", Height :

12½', Bird Feeder : 2.5' x 2.5' Square Shaped, 4 supporting pillars. M.S. Pipe 75 mm dia, 6'

Height, Reinforcement of FRP Chabutro Foundation Pipe. CC work for foundation of

Chabutro as per requirement, Brick Work and Plaster 5' x 5', height 1', Steel Work welded

in built up sections frame using 50x25 mm MS Verticle pipe. Horizontal Pipes of 25 mm

round shape of 4 ft height to be fitted in the horizontal pipe after doing hole in horizontal

pipe and dong welding work. 4 Vertical Pipes of 50 mm x 50 mm square shape to be fitted

in four corners of the platform area and the fifth pipe of 50 mm x 50 mm square to be

fitted with the gate at entry area. work including cutting, hoisting, fixing in position,

grinding and cleaning. Good quality synthetic base auto paint. Granite Takhti of 2 ft x 1 ft

to be fitted after preparing MS frame and welding to the vertical and horizontal pipes.

Providing & Fixing of FRP Chabutro, 400 GSM Matt, Surface Matt, Resin, Gel Coat, Dye

Moulding, Fiber Reinforcement Plastic, Dye Moulding and Assembling. Dia : 18", Height :

12½', Bird Feeder : 2.5' x 2.5' Square Shaped, 4 supporting pillars. M.S. Pipe 75 mm dia, 6'

Height, Reinforcement of FRP Chabutro Foundation Pipe. CC work for foundation of

Chabutro as per requirement, Brick Work and Plaster 5' x 5', height 1', Steel Work welded in

built up sections frame using 50x25 mm MS Verticle pipe. Horizontal Pipes of 25 mm round

shape of 4 ft height to be fitted in the horizontal pipe after doing hole in horizontal pipe and

dong welding work. 4 Vertical Pipes of 50 mm x 50 mm square shape to be fitted in four

corners of the platform area and the fifth pipe of 50 mm x 50 mm square to be fitted with

the gate at entry area. work including cutting, hoisting, fixing in position, grinding and

cleaning. Good quality synthetic base auto paint. Granite Takhti of 2 ft x 1 ft to be fitted

after preparing MS frame and welding to the vertical and horizontal pipes.

I HAVE ALSO GONE THROUGH TECHNICAL SPECIFICATIONS FOR THE ITEMS (AS

PER STANDARD P.W.D. TECHNICAL SPECIFICATION FOR THE ITEMS AND ALSO I

HAVE THE BOOK OF THE SAME) AND AGREE TO ABIDE BY THEM.

IN CASE OF WHERE IS NO TECHNICAL SPECIFICATION FOR THE ANY ITEMS

AVAILABLE, SPECIFICATION GIVEN BY THE ENGINEER-IN-CHARGE SHALL BE

FOLLOWED AND FOR THE SAME I AGREE TO ABIDE BY THEM.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

As per City Engineer’s circular no.-6/2011-12 Dt.24.6.2011 all terms &

conditions will be applied.

Seal and Signature of the Bidder Addl. City Engineer

Date: (South West Zone)