WELCOME MAINTENANCE INCLUDING INTERNAL ELECTRIFICATION TO OFFICERS MD ACCCN IN NORTHERN AND CENTRAL SECTOR AT MIL STN KOTA

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound emulsion destemper of approved tint complete all as specified and as directed.

Material and labour for complete removal of existing treatment and preparation of old decorated treatment on ceiling / old plastered or unplastered surfaces of ceiling and applying two coat of oil bound emulsion destemper of approved tint over & including a coat of primer & including 3 mm thick wall care putty complete all as specified and as directed.

Material and labour for complete removal of existing treatment and preparation of old decorated treatment on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying two coat of interior acrylic emulsion paint of approved tint over and including a coat of approved primer as per manufacturer's instruction on wall by using Air-less paint primer sprayer including preparation/ levelling of old surface of wallcornices, pillasters complete all as specified & directed. Make:- Asian royale Glitz / Nerolac kashmir/ Burger silk Glamor or Equivalent Make as specified in the PS. Note:- Roller or brush should be provided.

Material and labour for apply walll care putty of 3 mm thick as in interior / exterior wall / ceiling surfaces of any description finished smooth and even surfces complete all as specified and as directed.

M&L for preparing old surface of walls plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old plastrered or un-plastered surfaces of ceiling & applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old or previously treated steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for an acrylic based crack and joint filler (cream) for wall, joints, gaps and holes & including preparation of surface as per manufacturer instruction all as specified and directed. MAKE:- Asain paint smart care/ ultra tech crack filler/ Dr fixit or equivelent as specified in the PS.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion as approved tint over and including 3mm thick wall care putty on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces & applying three coats of white wash on ceilings complete as spd & directed

Resecuring or easing and adjusting without taking down shutter of any description exc 1.0 sqm and not exc 2.0 sqm each, complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

Supply and fixing 3mm thick obscured or frosted, on one side and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and directed.

Supply and fix in renewal of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows / ventilators etc complete all as specified and as directed.

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips completed all as specified and directed.

S&F in renewal of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.

S&F in renewal of 18/19mm thick modular membrane kitchen cabinet door shutter ( made out by MDF boards) in wood grain colour, half round edge complete all as specified and directed.

S & F in renewal of stainless steel (304) electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and as directed. NOTE :- Size of basket may vary (+)5cm/(-)5cm.

S & F in renewal of stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed. NOTE :- Size of basket may vary (+)5cm/(-)5cm.

S & F in renewal of 200mm length stainless steel cabinet drawers handlers complete all as specified and as directed.

S & F in renewal of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with & including telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S & F in renewal of stainless steel Plane wire Basket/trolley SS 304 having size of 506x480x200mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and as directed.

S & F in renewal of stainlesss steel modular perforated cutlery basket SS 304 size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed

S & F in renewal of stainless steel hanging spice rack having three shelf spaces length of 500 mm complete all as specified and as directed.

S & F in renewal of wall mounted Pull it aluminium clothes drying system with L angle 31" for 4 pipe system with length of each pipe 5 ft (1.53m), i.e., total length of 20 ft (6.12m) complete all as specified and as directed.

S & F in renewal of ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed complete all as specofied and directed.

S & F in renewal of auto close hinges (size as per existing), stainless steel, bright finish or electro galvanised fixed complete all as specified.

S & F in renewal of 18/19mm thick MDF board as in shelf and partition of kitchen cabinet complete all as directed.

S & F in renewal of 25 mm dia fancy CP curtain rod with bracket and screw with neccessary all fittings complete all as specified and directed.

S & F PVC beading n exc 5 mm wide for entrance door complete all as specified and directed.

S & F in renewal of Rotational moulded three layered polythene water storage tank capacity of 500 ltrs(cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified and as directed.

S & F in renewal of Rotational moulded three layered polythene water storage tank capacity of 1000 ltrs(cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified and as directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M & L in renewal of vitreous china wash basin white flat back size 580x430 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed. Make :- CERA (Cat Part No S 2040109)/JAQUAR (Cat Part No OPs WHT-1580l)/ Johnson (Cat Part No J8396 CH) or techno commercially equivalent Makes as specified in PS.

M & L in renewal of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed. Make :- CERA (Cat No Conventional S1059101) /Jaquar (Cat Part No CWS WHT-551PNPP1841Z)/ Johnson (Cat Part No J8312) OR techno commercially equivalent makes specified in PS.

S & F in renewal of plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom, and cover with mild steel chromimium plated or aluminised hinging device fixed complete all as specified and as directed.

S & F in renewal of health faucet with 1 meter SS braided connection pipe complete all as specified and as directed. Make :- CERA Model-F 8030105AB (ABS)/ Jaquar ALD-565,/ Johnson cat part no J f8082A or techno commercially equivalent Makes as specified in PS.

S & F in renewal of towel ring of CP fixed with and including CP brass screws and wooden / plastic cleats (min wt 90 gms) all as for kitchen complete all as specified and as directed. Make :- Cera cat part No F 5013115CH /Jaquar cat part No ACN-1121N / Hindware cat part No F 580003 or techno commercially equivalent Makes as specified in PS.

S & F in renewal of 15mm bore two way angle valve chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed with necessary fitting complete all as specified and directed. Make :- CERA cat part No G1017211 / Hindware cat part no F 740006 / Johnson cat part no JT 1643A or techno commercially equivalent Make specified in PS.

S & F in renewal of Bib taps 15mm dia, chromium plated, long body, with CP flange all as per fixed in repairs complete all as specified and as directed. Make :- CERA cat part No G 1017152 /Jaquar cat pat no VGP-81037/ Hindware cat part No F 740011 or techno commercially equivalent makes specified in PS.

S & F in renewal of pillar taps, 15mm dia, long body/swan neck, fancy type suitable for fixing to wash basin screwed for iron pipe and fixed with necessary fittings and including PVC connection complete all as specified and as directed. Make :- CERA Cat Part No F1003103 / Jaquar cat Part No COP -021PM/ Hindware Cat Part No F 740002 or techno commercially equivalent makes specified in PS.

S & F in renewal of 15 mm wall mixture three in one with complete accessories complete all as specified and directed. Make :- CERA cat part No F1001411/ Jaquar cat part No QQP 7273PM/ Hindware cat part No F 740022 or techno commercially equivalent make specified in PS.

S & F in renewal of 15mm bore mixture valve chromium plated fancy type for wash hand basin centre hole,swan neck fixed to iron pipe with necessary fittings complete all as specified and as directed. Make :- CERA cat part No F1003461/Jaquar cat part No QQP 7167 BPM/ Hindware cat part No F 740009 or techno commercially equivalent makes specified in PS.

S & F in renewal of towel rail 600mm long of CP fixed with screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed. Make :- CERA Cat No.F5013104CH/Jaquar cat part No ACN-1111 SM/ Hindware cat part No F 450024 or techno commercially equivalent makes specified in PS.

S & F in renewal of shower rose 125/150 mm size brass chromium plated with swivel joints including fixing steel pipe or unions with all necessary fittings complete all as specified and as directed. Make :- CERA cat part No F7020111AB/ Hindware cat part No F 160142/ Johnson cat part No JF 803899 or techno commercially equivalent Makes as specified in PS.

S & F in renewal of Soap dish any type, fixed to plugs with chromium plated brass screws omplete all as specified and as directed. Make :- CERA Cat Part No F5013106CH/ Jaquar cat part No AKP 35731P/ Hindware cat part No F 450022 or equivalent makes as specified in PS.

S & F in renewal of 15 mm wall mounted sink mixture three in one with complete accessories complete all as specified and directed. Make :- CERA cat part No F1017501/ Hindware cat part No F740023/ Johnson cat part No JT 1235A or techno commercially equivalent Make as specified in PS.

S & F in renewal of frameless bathroom LED touch sensor mirror wall hanging size 600x450 mm incl all necessary fittings all as specified and directed

S & F in renewal of Corner glass shelf, with bracket including all necessary fittings complete all as specified and directed.

M & L for welding in repair n. exc. 10 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed.

S & F in renewal of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets coupling & waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 200mm complete all as specified and directed.

S & F in renewal of stainless steel utensil plate rack of size 900x1000x200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surface, complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface including providing wooden/PVC rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces, complete all as specified and directed for the following: - One light/ceiling fan/exhaust fan/bell buzzer point controlled by one, one way switch of 5/6 Amps. Note :- Cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate.

All as per item No 60.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 Amp switch.

All as per item No 60.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on same board, controlled by one, one way 5/6 Amp switch.

All as per item No 60.00 (here-in-before) but one light point controlled by two, two way switch of 5/6 Amps.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable FRLS of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface for one socket outlet 15 amp on independent board including providing wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surface, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, Two way, ISI marked, complete all as specified & directed.

Supply and fixing switch socket combination, 5/6 and 15/16 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

S & F socket outlet, 5/6 Amps, 230 volt, five pin, flush type universal, ISI marked, complete all as specified & directed.

S&F switch piano flush type 15/16 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S & F socket outlet, 5/6 & 15/16 Amps, 230 volt, five pin, flush type universal, ISI marked, complete all as specified & directed.

Supply and fixing switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

S&F modular switch 1 way 5/ 6 Amps, 1 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular socket, 5/6 Amps, 2/3 pin combined 2 module, 240 volts, ISI marked, complete all as specified & directed.

S&F PVC/polycarbonate lamp holder, angular/batten type with back plate, ISI marked complete all as specified & directed.

S&F in renewal of stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 50mm, 3 terminals, complete all as specified & directed.

S&F of modular bell push, 6A, 1 module, ISI marked complete all as specified & directed.

S&F in renewal of buzzer, Ding Dong AC, 230 volts, single polee, ISI marked complete all as specified & directed.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 4 Sqmm LT, 1100 volts grade, drawn through and including 20 mm dia PVC non metallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed. Note :- Two runs of cable one run of earth wire and one run of PVC non metallic conduit / casing & caping shall be measured as one run length. Cable required for connection to DBs shall deemed to be included and shall not be measured separately. Earth wire shall run inside the PVC conduit/casing & caping.

S&F in renewal of wall mounted 20 watt LED Tube light fittings, batten type with bipin holders, powder coated steel with internally prewired, complete all as specified and directed.

S&F in renewal of wall mounted 10 watt LED Tube light fittings, batten type with bipin holders, powder coated steel with internally prewired, complete all as specified and directed.

S&F in renewal of LED street light fitting 35 Watt, 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

S & F factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts SPN with 8 ways, Double door, complete all as specified and directed.

S & F factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, IP-43-IK09 protection grade, earth bar and Din rail, 415 Volts TPN with 4 ways, Double door, complete all as specified and directed. Note for items of MCB DB - (1) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S&F MCB, 6 to 32 Amps, Single Pole, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S&F MCB, 32 Amps, Single Pole & Neutral, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S & F, MCB TPN 63 Amps, 415 volts, four pole, B-curve, rupturing capacity 16KA conforming to IS-8828-1996, IEC-60898, complete, all as specified & directed.

S&F in renewal of exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep heavy duty, sweep with, blades, and frame and louvers & including connecting with and including PVC insulated three core 23/.0076 copper conductor cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

S & F in renewal of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S & F in renewal of single pole and neutral enclosure with a two pin and earth plug and socket complete with & including one single pole MCB of 20 Amp, SP, 240 V complete all as specified & directed.