Construction of Sub-store office building for Srirangam Division at Mannachanallur

Amount

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay stiff black cotton hard red earth, shales.murram, gravel stoney earth,earth mixed with small size boulders.

Supply and filling of M. sand in basement, levelling, watering and consolidation as per the stantard specification etc., complete.

Supply and filling the basement with gravel for foundation and basement including watering consolidation etc., complete.

Providing PCC 1:4:8mix using 40mm HB stone for foundation and flooring including cost of all materials, lead and lift etc., complete.

Providing RCC 1:11/2:3 mix using 12 to 20 mm HB stone jelly including cost of all materials, lead and lift etc., complete but exculuding cost of reinforcement as directed by Engineer incharge.

Column Footing

Column Up to Basement

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for grade beam and Plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).

Grade beam

Plinth beam

Brick work in CM 1:5 using II nd class country bricks of size 9"x41/2"x3" for ground floor wall including cost of all materials, labour charges etc., complete for ground floor upto 4.5M height.

Up to Basement

Ground Floor

First Floor

Refilling the excavated earth other than sand complying with standard specification for filling in side of foundation and basement including cost of labour charges lead lift etc., Complete.

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for column above GL with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).

Brick work in CM 1:3 using II nd class country bricks of size 23x11x7cm for partition wall including cost of all materials, labour charges etc., complete.

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Lintel sunshde & Stair Case with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).

Lintel

Sunshade

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for flooring concrete with 100mm thickness with out formwork including cost of all (machine crushed) materials, lead, lift, etc., complete. but excluding cost of steel reinforcement (As instructed by the Engineer at site)

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Roof Beam with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).

Providing flooring with ellis pattern finishing of 20mm thick with cement concrete 3 to 10mm chips & pointed with same mortor including cost of all materials, curing, etc., complete.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:1.5:3 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers

Supply and fabrication of steel reinforcement of any dia meter and placing in position tying with binding wire including cost of all materials, labour charges etc., Complete as directed by the Engineer incharge.

Fabrication, supply and fixing of MS steel door and window grills using required angles, flats and square bars including cost of all necessary fittings,painting with two coats of enamel paint, cost of all materials, labour, lead, lift etc., complete as instructed by the Engineer.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Rolling shutters with ISI monogram Gear operated)

Plastering in CM 1:3, 15mm thick for ceiling including cost of all materials labour charges etc., complete.

Plastering with C.M 1:5 12mm thick including cost of cement all materials labour etc., complete

Providing projected border of required size including cost of all materilas, labour, lead, lift etc., complete.

Providing Rainwater Soak pit with approved good quality with 5 Nos. RCC Well Rings of size 2' outer dia and 1' height with approved quality RCC circular cover slab of size 2' dia and 3" thickness , using 40mm brick jelly and filling sand as filter, including cost of all materials, lead, lift, labour, etc,.complete as directed by the engineer at site.

Supplying and fixing of joint free first quality double charged vitrified tiles of size 600mm x 600mm in CM 1:3 of approved quality and colour including cost of all materials, lead, lift etc complete,

Flooring with good quality ceramic tiles/Non slippery tiles of size 305 mmx 305 mmx 6mm laid over 20mm thick CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,

Dadooing walls with glazed tiles of size 300 x 200 x 6 mm laid in cement mortar 1 : 2 , 10 mm thick and pointing with white cement using 0.4 Kg / m2 including finishing the joint and pointing flush with tiles surface etc., complete.

Providing weathering course with good quality of solar reflective ceramic Tiles with a size 305x 305 x7 mm of approved make laid with proper slope to drain off water in CM 1:3,min 20 mm thick including cutting the tiles to the required size wherever necessary, laying in position and pointing with white cement mixed with crude oil 10% weight of cement used over a bed of brickjelly, lime concrete of 80mm thick with ratio of 32:12.5 cft, (no sand) with the required slope and beaten with wooden beaters including cost of all materials, curing, etc., complete.

Supplying cuddapah slab polished both sides for Cup-Board 40mm thick including cost of all materials, leads and lifts and fixing in position, including one coat of black paint in both side, etc., complete as per standard specification.

Supplying and fixing of New PVC door with frame in the building including cost of all materials, lead, lift, transport, labour charges etc, complete as directed by Board Engineer at site.

M & F in position of anodized aluminium glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.

Supply and fixing of Aluminium Ventilator louver type using Al.section of 45x45mm for framing, 12mm square rod 4mm pinheaded glass transport fixing , finishing with complete enamal painting over a priming coat for grill.

White washing two coats with white cement including cost all materiels labour charges lead and lift etc., complete.

Painting the inside walls with two coats of best quality Acrylic Distemper of approved colour over a interior primer coat of all materials, etc., complete.

Exterior painting with two coats of approved exterior emulsion over one coat of primer for wall including cost of all materials, labour, lead, lift, etc., complete.

supplying and fixing new European water closet with "P" or "S" trap with Double falpped seat and seat cover with Brass hinges and 12.5litre capacity porcelin low level flushing tank with all internal fittings including labour lead and lift as directed by the engineer incharge etc., complete.

Supplying and fixing Colour lipped Mouth Porcelin flat back urinals with all accessories such as 32mm dia Bell mouth PVC connection,15mm dia G.M. wheel valve,15mm dia 'B' Class G.I.waste water pipe,15mm dia nylon connection,15mm dia brass nipple etc.,as directed by the Enginner in charge including cost of all materials,labour,lead,lift,etc., complete.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as brackets , waste coupling, waste pipe, etc., including cost of all materials, labour lead, lift, etc., complete.

Supply and fixing of PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing size of 600mm x 450mm including cost of all materials, labour lead, lift, etc., complete.

Providing inspection chamber for sufficient intervels throughout the sewer line to a depth required for maintaining proper gradient of the sewerline including earthwork excavation, PCC 1:4:8, B.W in CM 1:5 and plastering with CM 1:3, 12mm tk with suitable Manhole cover at top including cost of all labour, lead, lift etc.complete.

Supply and laying 110mm dia 6Kg PVC pipes jointing, testing etc., complete, including cost of all materials, labour earth work excavation and sand filling etc., complete.(Sewer Line)

Supply, laying, loosely jointed 100mm dia PVC pipe in dispersion trench including cost of all materials, lead and lift etc., complete.

Supply and spreading of 40mm HBG stone jelly for filling in dispersion trench / filteration tank as directed by the Engineer at site.

Supply and fixing in position of PVC ventilating shaft of 75mm dia kg/cm2 including cost of cowl, transport etc., complete.

Supply and fixing of UPVC pipe SCHEDULE 40 with superior quality on wall / open including cost of all materials, fittings, fixture transport, labour, lead, lift, etc., complete.

Supplying and fixing of Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type) including cost of all materials, labour lead, lift, etc., complete.

Supply & fixing of GM gate valve including cost of all materials, all labour, lead, lift etc., complete.

Supplying & fixing of PVC water tank of 1000 litres capacity of reputed make as per the instructon of Engineer-in-charge including cost of tank, transport and fixing charges etc., complete.

Supply and fixing PVC down fall pipe of 4 Kgf 110 mm dia with necessary coupling grating , shoes, bends, clamp etc., complete including cost of all materials labour lead, lift etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator)

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 1200mm (48”) sweep AC celling fan (High Speed) of Crompton make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x100mm x113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and run of 2 x 6 SQ.MM (84/0.3) PVC insulated SC unsheathed (Heavy Duty) Copper.Conductor of 1100 V on 7/20 GI bearer wire for service connection mains.

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuseunit (500V) 32A neutrallink and earthlink (1"x1/8"copperflat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make)

Supplying and fixing of 1 x 48 W LED Street light fittings including cost of all materials, labour, lead, lift etc., complete, as per standard specification..

Providing earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work including necessary masonry work etc., complete.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing Galvalume sheet roofing with 0.5mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts etc., complete complying with standard specification and as directed by the departmetal officers

Samsudeen

G KANNAN

T GOVINDARAJAN