SPECIAL REPAIRS/ REPLACEMENT TO CONCERTINA COIL FROM TOWER NO. 6 TO BRAHMANI GATE, SPECIAL REPAIRS TO MAIN GATE AND SECURITY COMPLEX UNDER SPECIAL REPAIRS B/R AT NAVAL STATION BHEEMUNIPATNAM, PROVISION OF RCC BENCHES WITH GRANITE SEAT AND BACK IN THE

Amount

Dismantling mild steel work of any description not otherwise provided for and removing materials from site of work complete all as directed.

Dismantling of barbed wire in position not otherwise provided for complete all as directed.

Dismantling of Concertina coil 8 kg per coil per 6 to 8 RM in position not otherwise provided for complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L Reinforced Cement Concrete type A-1, 1:1.5:3 (20mm graded stone agg) as in beams, cantilever, lintels over 1.5 mtr span including necessary scaffolding and formwork etc complete all as specified and as directed.

M&L for welding reinforced with existing reinforcement using mild steel bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

M&L for running welding in repairs exc 2.50 cm but not exceeding 5.0 cm in length and thickness of weld is exe 6mm but not exc 9 mm complete all as specified and as directed.

Taking down cement plaster on brick/concrete surfaces work wall including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer including preparation of new steel surfaces over 10cm width or girth complete all as specified and as directed.

M & L rendering 5mm thick in cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and fair complete all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required including cranking bending hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified.

M&L applying two coats of weather shield exterior emulsion paints over a coat of primer including preparation of new external wall surfaces complete all as specified and as directed.

S&F mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for blausters running bars, for doors, balusters, noising to steps including embedding in concrete and screwing etc. wind ties for roof incl securing bolts, posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh) incl all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed.

S&F 610 mm dia concertina coil, galvanised, precoated with black anti-corrosive paint, weighing apprx 8 kg per coil of 6-8 mm stretch and fixing to any type of standard rails, straining bolts, etc. including securing or tying at crossings with necessary clips/ pins etc complete all as specified and as directed.

S & F galvanised 2 strand steel barbed wire (galvanised Class 3) 4 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed. (Note: Each line wire to be measured)

M&L for applying one coat of exterior emulsion paints including preparation of old treated surfaces complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed

Taking down chowkat or frame with shutter area n. exc 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frame with shutter, (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4sqm each and removing from site complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Demolition of Brick work or stone boulders masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed

Dismantling water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store complete all as specified and as directed.

M & L 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L 50 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in above sub base complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ sub base and paving finished cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for 1st or premium or standard quality non skid ceramic coloured joint free tiles of size 600 x 600 x 6 to 7 mm thick in floor, shelves etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6 finished even and rough complete all as specified and as directed.

M & L for 1st or premium or standard quality non skid ceramic coloured joint free tiles of size 600 x 600 x 6 to 7 mm thick in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick screed bed in CM 1:4 finished even and rough complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 (Ist quality) as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 finished even and rough complete all as specified and as directed.

S&F glazed ceramic tiles in vertical surface (skirting) 300 x 450 x 7mm thick or 250 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match joint free over rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S&F anodised powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and suitable anodised aluminium handles and rollers complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated anodised coloured aluminium grill/ decogrill for windows, ventilators complete all as specified and as directed by the Engineer-in-Charge.

S&F 4.8 mm thick sheet glass, ordinary quality & glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F 4mm thick figured glass, pin headed type & glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified.

M & L rendering 10mm thick on fair faces of brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5mm thick in cement plaster on ceiling in cement mortar (1:3) including 3 mm thick wall care putty complete all as specified and as directed.

Taking up or down 15mm dia. steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20mm dia. steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 25mm dia. steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge.

S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 20 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 25 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 32 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

M&L for vitrified parking/ path tiles of 10 mm thick of size 400 x 400 mm set, jointed and pointed in neat cement slurry with grey cement pigment in floors over a screed bed of 15 mm thick in cement mortar 1:4

S&F 2nd class plain teak wood (well seasoned), solid, straight, chowkats and frame, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 30mm thick flush shutter solid core construction, with block board core and plywood face panel, commercial type on both sides with 6 mm thick teak wood beading including covering both faces with decorative face veneer with lipping/ frame to match complete all as specified and as directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton door shutter, open rebated and prepared to receive glass, gauge etc. divided into squares, with sash bar, with plain chamfered or rounded, mitred and rebated edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc. divided into squares, with plain, chamfered, mitred and rebated sash bars, provided with stiles and rails complete fitted with stiles and rails as specified in SSR-I , Section 8,clause 8.24(a) and fitted to chowkats 30mm thick complete all as specified and as directed.

M&L preparation of new wooden surface of any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint first grade quality over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

M & L for preparation of new internal surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for preparation of old treated surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of weather shield exterior emulsion paints for external wall surfaces complete all as specified and as directed.

S&F 125mm size MS butt hinges medium weight cold rolled fixed to frame complete all as directed.

S & F 150mm size aluminium handles, cast type, anodised complete all as directed.

M&L 200 mm long , aluminium alloy barrel tower bolts anodised extruded section ISI marked complete all as specified.

S&F aluminium extruded section door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width complete including taking down old door closer complete all as specified and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified & directed.

S&F 100mm size MS butt hinges medium weight cold rolled fixed to frame complete all as directed.

M&L 150 mm long , aluminium alloy barrel tower bolts anodised extruded section ISI marked complete all as specified.

S & F 125mm size aluminium handles, cast type, anodised complete all as directed.

S&F grating doom 125mm dia of PTMT approved quality (minimum weight 40 gms) complete all as specified.

S & F 15 mm dia bib tap cast copper alloy chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as specified and as directed.

S & F in repair 15mm dia pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S & F in repair PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S & F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair stainless steel tubular towel rail 20mm dia, D type 600mm long between flanges of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed

S & F in repair brass CP towel ring round with round flange complete all as specified and directed.

S & F in repair 15mm dia angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed

S & F 15 mm dia two way bib cock chromium plated fancy type complete all as specified and as directed. (Jaquar Cat part No. FON-40041 or equivalent as approved by GE)

S & F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) Conforming to IS 12701-1996 hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I complete all as specified and as directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and as directed

Supply and fixing gun metal, globe or gate valve of size 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair concealed type 15mm dia stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F in repair wash hand basin vitreous China white coloured flat back of size (550x400)mm including a pair of bracket and cutting for pinning in ends of brackets but excluding taps, waste, chain and plug complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet of "Orissa" pattern size 580 x440mm white with integral foot rests including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor all as specified and directed.

S&F in repairs, 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia. and connection to pipes and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S & F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified & as directed.

M & L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair PVC (SWR) gully trap 110mm square or round mouthed type 'S' setting and jointing with solvent cement complete all as specified.

Taking down roof WPT/ plaster etc of any description complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed.

M&L for 25 mm average thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in padding concrete complete all as specified and as directed by the Engineer- in-Charge.

M & L rendering 10mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement including mixing of WPC (WPC will be measured and paid separately) complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sq.m. and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/Sq.m.) laid on primed surface by forced application and applying a coat of solar reflective bituminous aluminium paint complete all as specified and directed by the Engineer-in-Charge.

Supply only Integral Water Proofing Compound (ISI marked) of approved make.

M&L for ATT along the external/ internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed

M&L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia. holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by the Engineer-in-Charge.

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based emulsion) @ 0.5 litre/ hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed.

S & F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling structural steel work including doors, gates etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Use and waste of form work to sides of columns, pillars, posts, struts, piers and stanchions etc for fair finished surfaces complete all as specified and directed.

M&L for Reinforced Cement Concrete, 1:1.5:3, type A1 (Using 20mm graded granite stone aggregate) in columns, pillars, piers, posts and struts etc and the like complete all as specified and directed.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Cutting holes in stone walls exc one brick thick but n. exc two brick thick built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M & L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast blocks for embedding hold fast of doors, windows frames or chowkats including necessary form work, complete all as specified and as directed.

M&L TMT bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

S & F in repair stainless steel pipe 25mm dia Curtain rod for windows, doors opening etc complete all as specified and as directed.

S & F Fancy type chromium plated knobs for fixing curtain rod complete all as specified and as directed.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, cable etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in any type of soil complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M & L reinforced cement concrete M-30 (Design Mix Concrete) using 20mm graded aggregate as in foundations, including rafts, footings, plinth beams, bases for columns, basement slab, under-reamed piles etc. complete all as specified and as directed.

M & L reinforced cement concrete M-30 (Design Mix Concrete) using 20mm graded aggregate as in columns, pillars, piers, posts etc complete all as specified and as directed.

M & L reinforced cement concrete M-30 (Design Mix Concrete) using 20mm graded aggregate as in beams, cantilever, bressumers, lintel over 1.5 mtr span etc complete all as specified and as directed.

M & L reinforced cement concrete M-30 (Design Mix Concrete) using 20mm graded aggregate as in slabs supported on walls and the like complete all as specified and as directed.

M&L machine cut kota stone slab 20 to 25mm thick as in floor laid over cement screed bedding and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick rendering in CM 1:4 complete all as specified and as directed.

Use and waste of formwork to sides of foundation/ footings, plinth beams and similar work for rough finished surfaces complete all as specified and as directed by the Engineer-in-Charge.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces complete all as specified and as directed by the Engineer-in-Charge.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work, not exceeding 200mm thick for fair finished surfaces complete all as specified and directed.

M&L TMT bars 6 to 8mm dia cut to length, bent to shape required including cracking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6.0 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed

Earth filling in floors or pavings, using surplus earth from excavation, laid in layers n exc 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed

M & L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finishes with using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 in double layer using WPC in outer layer of 5 mm thick complete all as specified and as directed by the Engineer-in-Charge. Note: WPC will be measured and paid separately

M&L for rendering 5 mm thick on fair faces of concrete surfaces of ceilings in CM 1:3 and finished even and smooth with out using extra cement complete all as specified and directed by the Engineer-in-Charge.

M & L for preparation of new external surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

S&F 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces and size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 125mm size SS butt hinges medium weight cold rolled fixed to frame complete all as directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick wall or concrete surface in cement mortar 1:3 with water proofing compound complete all as specified and as directed.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge.

M&L for 40 mm thick damp proof course in 1:2:4 type B-0 using 12.5 mm graded aggregate to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed by the Engineer-in-Charge.

M&L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. M complete all as specified and as directed by the Engineer-in-Charge.

M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. M complete all as specified and as directed by the Engineer-in-Charge.

M & L for treating the backfill in contact with the foundation at the rate of 7.5 Ltrs of anti termite emulsion per Sqm of vertical surface complete all as specified and as directed.

M&L for treating the soil under plinth protection @ 5 ltrs of emulsion per Sqm of surface area complete all as specified and as directed.

M&L for treating the top surface of filled earth @ 5 ltrs of emulsion per Sqm of surface area complete all as specified and as directed.

M&L for treating the soil along with external perimeter of building @ 2.25 ltrs of emulsion per meter of the perimeter wall complete all as specified and as directed.

M&L for 25 mm average thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in floor finishes with spike rolling to surfaces or making impression of expanded metal while concrete is green complete all as specified and as directed by the Engineer- in-Charge.

S&F anodised aluminium snap grid frame work of size 605 mm x 605 mm for false ceiling complete all as specified and as directed

M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

M & L for preparation of new surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in floors and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M & L hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and well rammed to a true surface, complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in skirting/ dado and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 10mm thick in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully existing aluminium /copper conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , concealed type with 3 mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 151 here-in-before but for one fan /E Fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 151 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 151 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 151 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4.0 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4.0 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4.0 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4.0 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 to the ends with taking down of old unserviceable sub main wiring and making good disturbed surface complete all as specified and as directed. NOTE: 3 runs of 4.0 Sqmm and one run of PVC concealed conduit 25 mm dia will be measured as one unit i.e. RM

Supply and fixing switch socket outlet multipurpose 3 pin 5 Amp and one 3 pin 15 amp controlled by and one 15 Amp switch all as specified and as directed

Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed

Fixing only Switch flush button single pole one way 5 Amp, 240 volt , complete all as specified and as directed. (Note : Material obtained from Srl item No. 150 here in before shall be used)

S&F switch socket outlet 5 pin 5 amp flush type with including switch all as specified and as directed.

Fixing only switch socket outlet 5 Amps flush type complete all as specified and as directed. (Note : Material obtained from Srl item No. 150 here in before shall be used)

S&F ceiling rose surface bakelite three terminals all as specified and as directed.

Fixing only ceiling rose, surfaces bakelite three terminal complete all as specified and as directed. (Note : Material obtained from Srl item No. 150 here in before shall be used)

S & F Switch flush button single pole two way 5 Amp, 240 volt , complete all as specified and as directed.

S&F in repair sheet metal enclosure for MCCB DBs, phosphatised, Powder coated , triple pole and neutral (TPN) 240 Volt , double door, suitable for 4 way with din rail earth and neutral bar complete all as specified and as directed.

S&F sheet metal enclosure for MCB DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with din rail earth and neutral bar all as specified and as directed.

Supply and fixing in proper position MCCB four pole of capacity 100 amps, 415 Volts 25kA breaking capacity all as specified and as directed.

S&F MCB, FP, rupturing capacity 10 kA, ‘C’ curve, 63 Amp, 415 volts ISI marked complete all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F MCB, DP, rupturing capacity 10 kA, ‘C’ curve, 40 Amp, ISI marked complete all as specified and as directed.

S&F indoor luminaries decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install including twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. [Make: CG Cat Part no. CCS-100-20-65-HL2-DP-NWH/ Havells Cat Part No. LHEXACP7IN1W020 or equivalent as approved by GE]

S&F in repair Recess Mounting luminaries LED down lighter of 2'x 2' square type 42 W pearl white complete all as specified and as directed.

S&F lamp holder insulated body suitable for Retrofit lamp all as specified and as directed.

S&F in repair on wall security LED light fitting luminaries 1X25 W and including cable for connection from ceiling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut, washer, clamp etc all as specified and as directed by the Engineer-in-Charge.

S&F Exhaust fan wall mount type 300 mm sweep metal body Heavy duty , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connections, dismantling the blades and removing fan including blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection complete all as specified and as directed.

Material and labour for taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including supply and fixing necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan

Supply only fan condenser upto 2.5 mfd

Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavities with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc 2 cm ) complete all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, FRLS cable etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and as directed.

Removing excavated material from site to a distance n.exc 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed (Note : Compacted thickness shall only be measured and paid)

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trench /poles/on wall including taking down old unserviceable one complete all as specified and as directed.

Supply and lay bricks common burnt clay building bricks sub-class B of size 230x115x75 complete all as directed by Engr-in-Charge.

M&L for Earthing complete with 7.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2.5mtrs length buried directly and preferably vertically in ground with top flanged ended 2.5mtrs below ground level welded/ connected with GI strip 32×6mm size on the top edge of the flange to bottom edge of the flanged for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe complete including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab and necessary testing on completion complete all as specified and as directed . .

Supply and fixing fan regulator electronic deluxe rotary step type all as specified and as directed.

S&F sheet metal enclosure for MCB DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 4 way with din rail earth and neutral bar all as specified and as directed.

S&F on wall security LED light fitting luminaries 1X25 W and including cable for connection from ceiling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut, washer, clamp etc all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Ceiling fan of 1200 mm sweep 5 STAR rating with clamp and hook at proper position with taking down old ceiling fan and kept in MES store yard with necessary accessories etc.all as specified and as directed. (Havells model no : ES 50 or equivalent as approved by GE)

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trench /poles/on wall complete all as specified and as directed.

M&L for galvanized iron tubing 25 mm bore light grade with all fittings for protection of FRLS cable, laid in trenches/wall/floor including necessary clamps, bolt/nut complete all as specified and as directed. Note: Earth work excavation will be measured and paid separately.

SSV CONSTRUCTIONS

HUSSAIN ENGINEERING WORKS

SRI RAJA RAJESWARI ENTERPRISES