Loading…
Loading…
Tender Value
₹7.0 Cr
EMD Value
₹7.0 L
Closing Date
18 May 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
City Engineer, Morbi Municipal Corporation
BEAUTIFICATION OF VARIOUS CIRCLES AT DIFFERENT LOCATIONS UNDER MORBI MUNICIPAL CORPORATION, MORBI.
301707
MRMC/0041/04/2026
Open
Miscellaneous Works
Morbi
15 documents required · 15 mandatory
₹15,000
Morbi Municipal Corporation, Morbi
₹7.0 L
5 May 2026
5 May 2026
5 May 2026
18 May 2026
5 May 2026
NAME OF WORK :- BEAUTIFICATION OF VARIOUS CIRCLES AT DIFFERENT LOCATIONS UNDER MORBI
MUNICIPAL CORPORATION, MORBI.
RECAPITULATION SHEET
Sr No. Description Amount
DEVELOPMENT OF SWAMI VIVEKANAND CIRCLE UNDERMORBI
MUNICIPAL CORPORATION AREA AT MORBI.
DEVELOPMENT OF BHAGATSINH CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF JUNI SHAK MARKET CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF SDM BUNGLOW CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF BAPA SITARAM CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF VEER BHOJA BAPA CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF SUPER TALKIES CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF SHOBESHWAR ROAD CIRCLE UNDER MORBI
MUNICIPAL CORPORATION AREA AT MORBI.
DEVELOPMENT OF ARUNODAY CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF LAKHDHIR SINHJI CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF NAGAR DARWAJA CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
DEVELOPMENT OF V C FATAK CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SWAMI VIVEKANAND CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SWAMI VIVEKANAND CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 83.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 55.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 530.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 54.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 28.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing and fixing approved quality natural
sandstone cladding on rectangular statue pedestal
surfaces as per approved photo reference, using
30–40 mm thick sandstone slabs with honed / fine
rubbed finish, fixed over prepared pedestal surface
11 in cement mortar 1:4 with neat cement slurry, Sqm. 3.00 ₹ 2,650.00 ₹
including SS cramps where required, true to line
and level, with straight aligned joints, cleaning,
curing and all labour and materials complete in all
Providing and fixing approved quality natural
sandstone top stone plinth slab 75 mm thick on
statue pedestal, of required plan size, with honed /
fine rubbed finish, chamfered edges on all exposed
sides and outward slope for drainage, fixed over
prepared base in cement mortar 1:4 with neat
cement slurry, including cutting, finishing, curing,
cleaning and all labour and materials complete in all
respects as per approved drawing and photo
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
13 rolled curved railing as per circle radius, SS base Rmt. 20.00 ₹ 3,650.00 ₹
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
Providing, supplying and laying natural sandstone
cube sett flooring of approved make and light beige
/ buff shade, using machine-cut sandstone cubes of
size 100–120 mm and thickness 40–50 mm, laid in
curved / radial fan pattern as per approved drawing
and reference photograph, over 50 mm thick well-
levelled and compacted coarse sand bedding,
including preparation of surface, dressing and
cutting of stones to required curves, maintaining
proper line, level and slope, watering and ramming,
filling of joints with cement slurry, thorough
cleaning of finished surface, curing for specified
period, including all materials, labour, tools, plants,
wastage, lead & lift, protection of work, and
complete in all respects as directed by Engineer-in-
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
15 concret as per approved design and including Rmt. 326.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Providing, supplying and fixing decorative outdoor
cast iron dustbin of capacity 100–120 litres, made
from heavy-duty cast iron body with ornamental
panels, complete with top hinged / liftable cover,
internal removable MS/HDPE liner, corrosion-
resistant primer + two coats of exterior grade
enamel / PU paint (dark grey/black as approved),
smooth edges, drain holes at base, and weather-
17 resistant construction suitable for urban roads, Nos. 5.00 ₹ 26,625.00 ₹
footpaths, gardens and public places, including all
fittings, fasteners, anchoring bolts, fixing on RCC
base / hard surface, transportation, loading-
unloading, labour, tools, complete in all respects as
per approved sample and drawing.
Providing, carving, supplying and fixing decorative
outdoor heritage stone bench of approved design
and size 2000 mm (L) × 600 mm (W) × 450 mm (H),
made from machine-cut and hand-carved natural
stone (Dhrangadhra sandstone / approved
equivalent), comprising solid seat slab, fully carved
ornamental backrest with lattice pattern, carved
side arms and solid stone legs, including complete
hand carving, machine cutting, fine polishing and
edge rounding, providing SS dowels/stone pins and
epoxy/white cement slurry for fixing, placing on
prepared hard surface, proper alignment and
levelling, including all materials, labour, tools,
transportation, loading-unloading, fixing at site and
making good, complete in all respects as directed
by Engineer-in-Charge.
Providing, fabricating, supplying and installing
prefabricated planter-cum-bench unit of free-form
/ organic curved shape as per approved
photograph, drawings and site instructions,
constructed using a structural Mild Steel (MS)
framework made from minimum 40×40×3 mm and
50×25×3 mm MS hollow sections, including all
cutting, bending, welding, grinding and surface
preparation, complete. All MS members shall be
fully welded, joints ground smooth, and treated
with two coats of zinc-rich anti-corrosive primer
followed by two coats of exterior-grade PU / epoxy
paint of approved shade and finish to ensure long-
19 term durability in outdoor conditions. The seating Rmt. 60.00 ₹ 9,500.00 ₹
surface, backrest and external cladding shall be
finished with WPC (Wood Plastic Composite)
planks, UV-stabilized, moisture-resistant, termite-
proof, minimum 25–30 mm thickness, fixed over
the MS framework using stainless steel screws /
concealed mechanical fasteners, ensuring uniform
gaps, clean alignment, rounded edges and smooth
finished appearance. The planter portion shall be
integrally formed within the MS framework and
internally lined with HDPE / heavy-duty waterproof
liner sheet, including provision of drainage holes
with PVC sleeve, to prevent water stagnation and
corrosion of the steel structure.
Providing and carrying out renovation and visual
enhancement of existing statue to match the
approved proposed reference image, including
thorough surface cleaning by low-pressure water
wash and soft nylon brushing, removal of dirt,
biological growth, stains and weather marks, minor
crack filling and surface patch repair using
compatible stone repair mortar, smoothing of
uneven patches, uniform colour correction and
toning to achieve consistent finish as per proposed
appearance, application of breathable exterior-
grade mineral/stone-based coating or patina
(where required) to achieve the approved colour
tone, final application of transparent weather-
resistant stone preservative coating, including
scaffolding, protection of surrounding areas, all
labour, materials, tools and incidentals complete in
all respects as directed by Engineer-in-Charge.
Providing, supplying and planting low ornamental
hedge plants such as Duranta gold / Boxwood /
Alternanthera of approved variety, 250–300 mm
height at planting, planted at 200 mm center-to-
center spacing in straight or curved alignment as
per approved layout, including excavation of trench
up to 300 mm depth, removal of unsuitable
21 material, refilling with approved garden soil mixed Rmt. 80.00 ₹ 650.00 ₹
with organic manure and sand in proportion 2:1:1,
leveling, watering, initial pruning, regular trimming,
replacement of dead plants, and maintenance for
90 days, complete in all respects as directed by
Engineer-in-Charge.
Providing and developing lawn with Doob grass
(Cynodon dactylon) by turfing method using healthy
and well-grown turf, including excavation and
surface dressing up to 150 mm depth, supplying
and spreading approved garden soil mixed with
manure and sand in proportion 2:1:1, fine leveling,
laying turf pieces closely jointed, rolling, watering,
removal of weeds, replacement of damaged turf,
and maintenance for 90 days, complete in all
respects as directed by Engineer-in-Charge.
Providing, supplying and planting pre-trained
ornamental topiary shrubs in ball or cone shape
such as Ficus panda / Murraya exotica / Thuja
dwarf, 600–900 mm height, including excavation of
pits of suitable size, supplying and filling with
23 approved garden soil mixed with organic manure Nos. 5.00 ₹ 1,650.00 ₹
and sand in proportion 2:1:1, planting, firming,
watering, staking if required, replacement of dead
plants, shaping and maintenance for 90 days,
complete in all respects as directed by Engineer-in-
Providing, supplying and planting approved quality
ornamental trees viz. Polyalthia longifolia (Ashoka –
spreading), Lagerstroemia indica (Crepe Myrtle),
Cassia fistula (Amaltas) and Terminalia mantaly, of
2.0–2.5 m height and 8–10 cm girth, in curvilinear
seating planter area on existing in-situ soil only,
including surface loosening of soil, application of
24 organic manure, planting in proper alignment, Nos. 15.00 ₹ 2,950.00 ₹
staking with wooden supports, watering,
replacement of dead plants and 30 days
maintenance, complete with all labour, materials
and incidental works as per approved photograph
and directions of Engineer-in-Charge.
Providing, supplying, planting and maintaining
ornamental landscaping around statue pedestal in
circular formation on existing soil, including
preparation and loosening of existing ground,
excavation of planting pits, removal of debris and
unwanted material, planting low height ornamental
hedge plants (Alternanthera / Duranta Golden /
Iresine, 200–250 mm height at 200 mm c/c),
medium height ornamental shrubs (Murraya
exotica / Ixora dwarf / Gardenia, 450–600 mm
height at 450 mm c/c) and medium-tall ornamental
shrubs (Duranta Green / Clerodendrum / Hibiscus
dwarf, 750–900 mm height at 600 mm c/c) as per
approved layout, including firming, watering,
dressing, trimming, protection, replacement of
dead plants and complete maintenance for 90 days,
all labour and materials complete as directed by
Engineer-in-Charge.
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
26 liminance coefficinet on cemend road shalll be min Sqm. 94.00 ₹ 364.08 ₹
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, supplying, erecting, testing and
commissioning decorative aluminium pole light of
2.90 m overall height, complete with heavy-duty
aluminium pole, cast aluminium base and
aluminium post-top double arm luminaire, fitted
with 2 × 50 W high-efficiency Bridgelux LED
modules, Nextor make LED driver with required
surge protection, internal copper wiring, PP powder-
coated finish suitable for outdoor conditions,
28 Havells make MCB with in-pole connector strip, Nos. 15.00 ₹ 16,100.00 ₹
including pole mounting hardware, base plate,
anchor bolts, electrical terminations, earthing
provision, transportation, unloading, installation,
alignment, testing, commissioning at site, and
providing 2-year warranty on luminaires, complete
in all respects as per approved drawing, sample and
technical specifications.
Providing and fixing LED Spike Light (9W–12W) for
outdoor landscape applications, complete with LED
driver, IP65 protection, die-cast aluminium housing
with powder-coated finish, clear/toughened glass
diffuser, suitable spike rod for soil fixing,
tiltable/adjustable mounting bracket, waterproof
connectors, screws and fasteners, making all
waterproof electrical joints, placing spike firmly into
soil, angle adjustment, connection to power supply,
testing and commissioning, including all labour,
materials, tools and tackles, complete in all respects
as directed by Engineer-in-Charge.
Providing and fixing LED Focus Light (30W–50W,
COB type) with IP66 protection, die-cast aluminium
body with powder-coated finish, tempered front
glass, high-efficiency reflector optics, adjustable
tiltable mounting bracket, surge protection ≥4 kV,
complete with external or in-built LED driver,
waterproof connectors, mounting clamps, nuts and
bolts, including aiming adjustment, installation,
testing and commissioning, all labour, materials,
tools and tackles, complete in all respects as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
34 aluminium strips, rubber grommets, rib, bakelite Sqm. 1.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated
providing panel board
and erecting (i) withcircuit
Miniature 350 mmbreaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
36 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
37 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
38 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
41 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
42 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
43 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
44 V,50Hz. having characteristic of quick action & Ea. 3.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
46 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
47 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
49 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 15.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
50 to be laid on wall with necessary clamps or in Rn.Mtr 175.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
51 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 30.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
52 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 30.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
53 in existing trench / pipe at road crossing or floor Rn.Mtr 30.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
54 in existing trench / pipe at road crossing or floor Rn.Mtr 30.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
55 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 1.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
58 Compound (BFC) suitable for safe earthing device. Ea. 15.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF BHAGATSINH CIRCLE UNDER MORBI MUNICIPAL CORPORATION
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF BHAGATSINH CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT MORBI.
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 219.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 116.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 1460.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 149.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 26.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing and laying precast cement concrete
square paving blocks of size 150×150 mm,
minimum 60 mm thick, M35 grade, factory
manufactured, laid over 25–30 mm thick coarse
sand bedding on prepared and compacted base,
11 including filling of joints with fine sand, proper line, Sqm. 1250.00 ₹ 1,500.00 ₹
level and slope, cutting of blocks where required,
compaction with plate vibrator, curing, all labour,
materials, tools, wastage and incidentals complete
in all respects
Providing and applying decorative polyurethane
(PU) based road coating in approved colours and
patterns over paved surface, including surface
preparation by cleaning/grinding, application of
compatible primer, minimum two coats of PU paint,
addition of anti-skid aggregate where required,
complete with all labour, materials, tools,
scaffolding and protection, complete in all respects
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
13 concret as per approved design and including Rmt. 1010.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Grill work for as per design on site with fitting &
Enemal painting on door/window, iron door, iron
grill or woodwork two coat
Providing, supplying, transporting and installing
joinable precast GFRC middle planter module of
approved design, circular / faceted form, overall
ft (750 mm) diameter and 1.5 ft (450 mm) height,
manufactured in M30 grade concrete, machine-
vibrated and cast in steel moulds, with minimum
mm thick walls, internal cavity suitable for planting,
finished with smooth exposed concrete / oxide
cement finish as approved.
Providing, supplying, transporting and installing
joinable precast GFRC end bench module of
approved design, 2.5 ft (750 mm) diameter
footprint and 1.5 ft (450 mm) height, designed for
18 seating use, manufactured in M30 grade reinforced Nos. 12.00 ₹ 15,500.00 ₹
concrete, machine-vibrated, cast in steel moulds,
with smooth exposed concrete / oxide cement
Providing, supplying, transporting and installing
joinable precast GFRC end planter module of
approved design, 2.5 ft (750 mm) diameter and
ft (450 mm) height, manufactured in M30 grade
19 reinforced concrete, suitable for terminating Nos. 8.00 ₹ 18,500.00 ₹
modular seating-planter arrangement, with internal
planting cavity and smooth exposed concrete /
oxide cement finish.
Providing, supplying, transporting and installing
joinable precast GFRC middle bench module of
approved design, 2.5 ft (750 mm) diameter and
ft (450 mm) height, suitable for modular seating
20 arrangements in urban roadside and pocket garden Nos. 20.00 ₹ 17,500.00 ₹
areas, manufactured in M30 grade reinforced
concrete, machine-vibrated and cast in precision
Brick work using common burnt clay building bricks
having crushing strength not less than
21 kg./Sq.Cm. in foundation and plinth in Cement Cum. 3.00 ₹ 4,203.06 ₹
Mortar 1:5. (1- Cement : 5 -fine sand)(B)
Providing and fixing natural stone cladding on
external wal lusing approved stone type
(Dhrolpuri/Dholpur/Kota/Sandstone/Granite), in
20–25mm or 25–30mm thickness, including:
Machine-cut stone slabs of approved colour &
finish Cement mortar backing (1:4) 10–12mm thick
Slurry coat (cement + polymer bonding agent ) on
the back of stone Fixing in line / level with spacers
Filling joints with matching non-shrink grout Edge
finishing, surface cleaning & curing Scaffolding,
transportation, loading unloading,complete As per
drawings & Engineer-in-charge.
Design, manufacture, supply and installation of
premium outdoor litter bin of approx. 60–80 litre
capacity, comprising internal removable MS waste
container made from minimum 1.6 mm thick CRCA
sheet with powder-coated finish, enclosed with
vertical hardwood slats of minimum 25 mm
23 thickness fixed on MS frame, including laser-cut top Nos. 15.00 ₹ 20,000.00 ₹
cover with waste opening, concealed
hinges/handles, corrosion-resistant fasteners, anti-
termite treatment to wood, exterior weather-
resistant coating, complete in all respects as per
approved design and drawings
Providing, fabricating, supplying and installing
vertical wayfinding / directional signage totem, of
approved size and proportions (approx. 450 × 450 ×
2100 mm or as specified), fabricated from mild
steel box sections / plates to form a rigid self-
supporting structure, including internal stiffeners,
base plate and all necessary welds. The signage
faces shall be formed using translucent acrylic /
polycarbonate panels with UV digital printed
graphics on backlit areas and non-backlit UV print /
vinyl graphics on opaque areas, as per approved
artwork and colour scheme. The system shall
include integrated internal LED backlighting (white
24 or RGB as specified) with uniform illumination, Nos. 5.00 ₹ 72,500.00 ₹
comprising LED modules/strips, drivers, wiring,
access provision for maintenance, and proper heat
dissipation. The complete unit shall be finished with
zinc-rich primer and exterior-grade PU paint /
powder coating on metal surfaces.The item
includes erection, fixing on RCC foundation or
pedestal using anchor bolts, alignment, electrical
connections, testing, commissioning, and making
good, complete in all respects as per approved
drawings, specifications and directions of Engineer-
Providing, carving, supplying, transporting and
fixing stone statue of Bhagat Singh, strictly as per
the same approved Design only, fully hand-carved
from a single, jointless block of approved natural
stone, maintaining exact same proportions, facial
expression, attire detailing, surface texture and
overall appearance as visible in the design,
including fine sculptural workmanship, surface
preparation, hand painting to exactly match the
design colours and tonal shading using exterior-
grade acrylic/mineral pigments over suitable stone
primer, minimum two coats with UV-resistant
matte clear protective coating, complete material
wastage, concealed SS dowel reinforcement, epoxy
resin fixing, protective packing, transportation,
unloading, precise positioning, true vertical
alignment, fixing on prepared pedestal with SS
dowels and non-shrink epoxy grout, final cleaning
and protection, all labour, materials, tools, taxes
and incidentals complete in all respects as per
Drawing and Engineer-in-Charge directions.
Providing and developing lawn in road
median/roadside including: Removing debris,
rubbish & leveling the area Dressing of surface &
soil loosening (100–150 mm deep) Mixing of
manure/compost (3–5 kg per sqm) Application of
NPK basal fertilizer Supplying & laying turf grass
(Doob grass / Selection-1 / Mexican / Carpet grass)
Rolling & light compaction Initial watering 30-day
maintenance including weeding, pest control &
replacement All labour, materials, tool & tackles,
loading–unloading, transportation complete As per
horticulture specifications & directions of Engineer-
Providing, supplying and planting urban roadside
tree of approved shade / ornamental species such
as Neem, Karanj, Peepal (ornamental form),
Bauhinia, Cassia, Tabebuia, Plumeria, Pongamia or
equivalent, having straight stem with minimum
clear stem height of 1.2–1.4 m and overall height of
1.8–2.2 m above finished ground level, grown in
polybag or rootball, including excavation of pit of
size 0.75 m × 0.75 m × 0.75 m, refilling with
approved good quality garden soil mixed with
organic manure and fertilizers, planting, watering,
fixing with two bamboo/wooden stakes, providing
and fixing MS tree guard, and maintenance
including watering, weeding, manure application
and replacement of dead plants for a period of
months, complete in all respects as directed by
Engineer-in-Charge.
Providing, supplying, planting and maintaining
formal geometric hedge and ornamental plantation
around statue pedestal in circular traffic island as
per approved layout and reference image, including
excavation and loosening of soil up to 450 mm
depth, preparation of planting beds with approved
soil mixture in the proportion of Garden soil : River
sand : Well-decomposed organic manure = 60 : 20 :
20, including neem cake @ 250 g per Sqm and soil
treatment with approved fungicide and anti-termite
chemical, fine levelling and dressing of beds,
supplying and planting of primary hedge plants
Duranta erecta ‘Golden’ or Ixora dwarf variety of
28 healthy, well-rooted condition having height Sqm. 25.00 ₹ 1,550.00 ₹
300–350 mm at time of planting, planted in double
row staggered pattern at 200–250 mm centre-to-
centre spacing and trimmed and shaped to achieve
continuous curved geometric profile with
maintained hedge height of 350–450 mm,
supplying and planting of secondary ornamental
filler plants Alternanthera ficoidea (Red/Green
variety) or approved equivalent having height
150–200 mm planted at 250–300 mm centre-to-
centre spacing and maintained at maximum height
of 250 mm, including pit making, planting, firming,
immediate and regular watering till establishment,
trimming, shaping, manuring, cleaning of beds and
surroundings, replacement of dead or unhealthy Total Amount ₹
surroundings, replacement of dead or unhealthy Total Amount ₹
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
29 liminance coefficinet on cemend road shalll be min Sqm. 141.00 ₹ 364.08 ₹
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, supplying, transporting,erecting, testing
and commissioning 5.0 metre high decorative LED
pole light complete in all respects, made from GI
tubular pole (114mm OD bottom section–2.0m &
76mm OD top section–3.0 m ) with PP powder
coated finish, fitted with aluminium post-top LED
luminaire of 500 mm diameter,equipped with
Watt LED module using high-efficiency LED chips
and electronic driver, including base plate
200×200×8mmthick, 600 mm long 12mm dia J type
foundation bolts with nuts & washers, internal
wiring with MCB and connector strip, complete
installation, alignment, electrical connections,
testing and commissioning at site, including all
materials, labour, tools, tacklesand incidentals,as
directed by Engineer-in-Charge.
Providing and fixing LED Spike Light (9W–12W) for
outdoor landscape applications, complete with LED
driver, IP65 protection, die-cast aluminium housing
with powder-coated finish, clear/toughened glass
diffuser, suitable spike rod for soil fixing,
tiltable/adjustable mounting bracket, waterproof
connectors, screws and fasteners, making all
waterproof electrical joints, placing spike firmly into
soil, angle adjustment, connection to power supply,
testing and commissioning, including all labour,
materials, tools and tackles, complete in all respects
as directed by Engineer-in-Charge.
Providing and fixing LED Inground Light (12W–18W)
suitable for outdoor walkable/drive-over
applications, having IP67 protection, SS-316
stainless steel top ring, die-cast aluminium housing,
toughened top glass, integrated high-efficiency LED
module with beam angle 15° to 45°, complete with
external or in-built LED driver, mounting
sleeve/housing can, clamps, stainless steel
33 fasteners, IP67 waterproof connectors, making all Nos. 20.00 ₹ 5,800.00 ₹
waterproof electrical joints, embedding the
luminaire in prepared pit over PCC bed, proper
levelling and alignment flush with finished surface,
installation, testing and commissioning, including all
materials, labour, tools and tackles, complete in all
respects as directed by Engineer-in-Charge.
Providing and fixing LED Focus Light (30W–50W,
COB type) with IP66 protection, die-cast aluminium
body with powder-coated finish, tempered front
glass, high-efficiency reflector optics, adjustable
tiltable mounting bracket, surge protection ≥4 kV,
complete with external or in-built LED driver,
waterproof connectors, mounting clamps, nuts and
bolts, including aiming adjustment, installation,
testing and commissioning, all labour, materials,
tools and tackles, complete in all respects as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
38 aluminium strips, rubber grommets, rib, bakelite Sqm. 2.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated
providing panel board
and erecting (i) withcircuit
Miniature 350 mmbreaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
40 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
41 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
42 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
45 without MCB to house appropriate nos. of Ea. 10.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
46 without MCB to house appropriate nos. of Ea. 10.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
47 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
48 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
50 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
51 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
53 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 50.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
54 to be laid on wall with necessary clamps or in Rn.Mtr 500.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
55 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 50.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
56 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 75.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
57 in existing trench / pipe at road crossing or floor Rn.Mtr 75.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
58 in existing trench / pipe at road crossing or floor Rn.Mtr 75.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
59 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 5.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
62 Compound (BFC) suitable for safe earthing device. Ea. 55.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF JUNI SHAK MARKET CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF JUNI SHAK MARKET CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 114.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 47.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 755.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 80.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 56.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
rolled curved railing as per circle radius, SS base
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
Providing and laying precast cement concrete
square paving blocks of size 150×150 mm,
minimum 60 mm thick, M35 grade, factory
manufactured, laid over 25–30 mm thick coarse
sand bedding on prepared and compacted base,
12 including filling of joints with fine sand, proper line, Sqm. 650.00 ₹ 1,500.00 ₹
level and slope, cutting of blocks where required,
compaction with plate vibrator, curing, all labour,
materials, tools, wastage and incidentals complete
in all respects
Providing and applying decorative polyurethane
(PU) based road coating in approved colours and
patterns over paved surface, including surface
preparation by cleaning/grinding, application of
compatible primer, minimum two coats of PU paint,
addition of anti-skid aggregate where required,
complete with all labour, materials, tools,
scaffolding and protection, complete in all respects
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
14 concret as per approved design and including Rmt. 580.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Supplying, excavating, planting and maintaining
central feature tree Ficus Panda (Topiary) of height
2.0 m, including excavation of planting pit of size
1.20 m × 1.20 m × 1.00 m, removing surplus soil
and disposing as directed; providing and filling
approved garden soil mixture comprising 50% good
quality garden soil, 25% river sand and 25% well-
decomposed organic manure, including neem cake
@ 1 kg per pit, bio-fertilizer / mycorrhiza, anti-
termite treatment to pit and surrounding soil, root
growth stimulant, planting, proper alignment and
levelling; providing tree staking with MS
angle/wooden supports with GI wire tying, tree
guard if required, initial watering, regular watering,
pruning and shaping to maintain topiary form,
replacement of dead plants if any during
maintenance period, maintenance for 12 months,
all labour, materials, tools, transportation and
complete in all respects as directed by Engineer-in-
Designing, fabricating, supplying and fixing thematic
hand sculpture symbolizing nature conservation, of
approved design and proportion, overall height
to 3.0 m, made in FRP (Fiber Reinforced Plastic) –
outdoor grade (or RCC / Bronze / Stone as approved
by Engineer-in-Charge) including preparation of
design drawings and mock-ups for approval;
providing internal MS pipe/angle framework for
structural stability (where required); surface
finishing, texture treatment and exterior-grade
17 painting / protective coating suitable for outdoor Nos. 1.00 ₹ 300,000.00 ₹
exposure; providing anchor bolts / SS dowels,
drilling into existing RCC pedestal / slab, grouting
with epoxy or non-shrink grout; transportation,
lifting, positioning, alignment and fixing of
sculpture; protection during installation, final
cleaning and finishing touches; all labour, materials,
tools, scaffolding and complete in all respects,as
directed by Engineer-in-Charge.
Supplying and fixing animal theme sculptural
elements such as deer, elephant, birds or similar, of
approved design, posture and form, overall height
0.30 metre, made of FRP (Fiber Reinforced Plastic)
– outdoor grade (or stone / concrete as approved
by Engineer-in-Charge), artistically sculpted and
finished; including surface preparation, exterior-
grade painting / UV-resistant protective coating,
18 providing SS/MS anchor bolts or dowels, drilling Nos. 10.00 ₹ 27,000.00 ₹
into existing RCC / stone / concrete base, fixing with
epoxy or non-shrink grout, proper positioning,
alignment and leveling within landscaped area,
protection during fixing, final cleaning and finishing,
all labour, materials, tools, transportation and
complete in all respects, as directed by Engineer-in-
Designing, supplying and fixing small size thematic
signage / theme board in traffic circle, conveying
approved messages such as “Save Nature”, “Care
for Environment”, “Green City” or similar, including
preparation of design layout, font and colour
scheme for approval; supplying signage panel of
size 600 mm × 450 mm made of ACP / FRP / MS
sheet (minimum 3 mm thick) as approved, with
vinyl graphics / PU paint / UV-resistant printing,
mounted on MS square pipe post of size 40 × 40 ×
19 2.6 mm thick with welded MS base plate, including Nos. 5.00 ₹ 8,500.00 ₹
surface preparation, red oxide / zinc primer and
two coats of synthetic enamel or PU paint to MS
members; fixing the signage on existing RCC /
concrete / stone base using SS/MS anchor
fasteners, nuts and bolts, proper alignment and
leveling, protection during fixing, final cleaning, all
labour, materials, tools, transportation and
complete in all respects as directed by Engineer-in-
Design, manufacture, supply and installation of
premium outdoor litter bin of approx. 60–80 litre
capacity, comprising internal removable MS waste
container made from minimum 1.6 mm thick CRCA
sheet with powder-coated finish, enclosed with
vertical hardwood slats of minimum 25 mm
20 thickness fixed on MS frame, including laser-cut top Nos. 15.00 ₹ 20,000.00 ₹
cover with waste opening, concealed
hinges/handles, corrosion-resistant fasteners, anti-
termite treatment to wood, exterior weather-
resistant coating, complete in all respects as per
approved design and drawings
Providing, fabricating, supplying and installing
vertical wayfinding / directional signage totem, of
approved size and proportions (approx. 450 × 450 ×
2100 mm or as specified), fabricated from mild
steel box sections / plates to form a rigid self-
supporting structure, including internal stiffeners,
base plate and all necessary welds. The signage
faces shall be formed using translucent acrylic /
polycarbonate panels with UV digital printed
graphics on backlit areas and non-backlit UV print /
vinyl graphics on opaque areas, as per approved
artwork and colour scheme. The system shall
include integrated internal LED backlighting (white
21 or RGB as specified) with uniform illumination, Nos. 3.00 ₹ 72,500.00 ₹
comprising LED modules/strips, drivers, wiring,
access provision for maintenance, and proper heat
dissipation. The complete unit shall be finished with
zinc-rich primer and exterior-grade PU paint /
powder coating on metal surfaces.The item
includes erection, fixing on RCC foundation or
pedestal using anchor bolts, alignment, electrical
connections, testing, commissioning, and making
good, complete in all respects as per approved
drawings, specifications and directions of Engineer-
Providing and developing lawn in road
median/roadside including: Removing debris,
rubbish & leveling the area Dressing of surface &
soil loosening (100–150 mm deep) Mixing of
manure/compost (3–5 kg per sqm) Application of
NPK basal fertilizer Supplying & laying turf grass
(Doob grass / Selection-1 / Mexican / Carpet grass)
Rolling & light compaction Initial watering 30-day
maintenance including weeding, pest control &
replacement All labour, materials, tool & tackles,
loading–unloading, transportation complete As per
horticulture specifications & directions of Engineer-
Supplying, planting and maintaining complete
landscaped plantation in traffic circle in layered
zoning pattern comprising Zone-1: central anchor
tree (Ficus Panda / Terminalia / Alstonia – paid
separately), Zone-2: mid-height shrubs such as
Duranta Gold, Ixora, Croton, Dwarf Hibiscus, Zone-
3: accent/form plants such as Agave, Sansevieria,
Cycas, Areca / Phoenix palm, Zone-4: edge and
ground cover plants such as Alternanthera
(red/yellow), Wedelia, Iresine and seasonal
23 flowering plants, including excavation, soil Sqm. 55.00 ₹ 1,200.00 ₹
preparation with approved garden soil mix (50%
garden soil, 25% river sand, 25% organic manure),
neem cake, fertilizers, anti-termite treatment,
planting at approved spacing, watering, pruning,
shaping, replacement of dead plants, maintenance
for 12 months, all labour, materials, tools,
transportation and complete in all respects as
directed by Engineer-in-Charge.
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
liminance coefficinet on cemend road shalll be min
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, supplying, transporting,erecting, testing
and commissioning 5.0 metre high decorative LED
pole light complete in all respects, made from GI
tubular pole (114mm OD bottom section–2.0m &
76mm OD top section–3.0 m ) with PP powder
coated finish, fitted with aluminium post-top LED
luminaire of 500 mm diameter,equipped with
Watt LED module using high-efficiency LED chips
and electronic driver, including base plate
200×200×8mmthick, 600 mm long 12mm dia J type
foundation bolts with nuts & washers, internal
wiring with MCB and connector strip, complete
installation, alignment, electrical connections,
testing and commissioning at site, including all
materials, labour, tools, tacklesand incidentals,as
directed by Engineer-in-Charge.
Providing and fixing LED Spike Light (9W–12W) for
outdoor landscape applications, complete with LED
driver, IP65 protection, die-cast aluminium housing
with powder-coated finish, clear/toughened glass
diffuser, suitable spike rod for soil fixing,
tiltable/adjustable mounting bracket, waterproof
connectors, screws and fasteners, making all
waterproof electrical joints, placing spike firmly into
soil, angle adjustment, connection to power supply,
testing and commissioning, including all labour,
materials, tools and tackles, complete in all respects
as directed by Engineer-in-Charge.
Providing and fixing LED Inground Light (12W–18W)
suitable for outdoor walkable/drive-over
applications, having IP67 protection, SS-316
stainless steel top ring, die-cast aluminium housing,
toughened top glass, integrated high-efficiency LED
module with beam angle 15° to 45°, complete with
external or in-built LED driver, mounting
sleeve/housing can, clamps, stainless steel
28 fasteners, IP67 waterproof connectors, making all Nos. 10.00 ₹ 5,800.00 ₹
waterproof electrical joints, embedding the
luminaire in prepared pit over PCC bed, proper
levelling and alignment flush with finished surface,
installation, testing and commissioning, including all
materials, labour, tools and tackles, complete in all
respects as directed by Engineer-in-Charge.
Providing and fixing LED Focus Light (30W–50W,
COB type) with IP66 protection, die-cast aluminium
body with powder-coated finish, tempered front
glass, high-efficiency reflector optics, adjustable
tiltable mounting bracket, surge protection ≥4 kV,
complete with external or in-built LED driver,
waterproof connectors, mounting clamps, nuts and
bolts, including aiming adjustment, installation,
testing and commissioning, all labour, materials,
tools and tackles, complete in all respects as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
33 aluminium strips, rubber grommets, rib, bakelite Sqm. 2.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated
providing panel board
and erecting (i) withcircuit
Miniature 350 mmbreaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
35 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
36 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
37 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
40 without MCB to house appropriate nos. of Ea. 10.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
41 without MCB to house appropriate nos. of Ea. 10.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
42 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
43 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
45 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
46 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
48 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 40.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
49 to be laid on wall with necessary clamps or in Rn.Mtr 550.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
50 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 50.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
51 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 75.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
52 in existing trench / pipe at road crossing or floor Rn.Mtr 75.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
53 in existing trench / pipe at road crossing or floor Rn.Mtr 75.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
54 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 3.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Length of Pipe : 3.00 mtrs Back filling Compound :2
Providing and erecting Pipe type earthing having
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
57 Compound (BFC) suitable for safe earthing device. Ea. 45.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SDM BUNGLOW CIRCLE UNDER MORBI MUNICIPAL CORPORATION
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SDM BUNGLOW CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT MORBI.
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 125.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 116.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 472.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 48.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 26.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing and laying precast cement concrete
square paving blocks of size 150×150 mm,
minimum 60 mm thick, M35 grade, factory
manufactured, laid over 25–30 mm thick coarse
sand bedding on prepared and compacted base,
11 including filling of joints with fine sand, proper line, Sqm. 370.00 ₹ 1,500.00 ₹
level and slope, cutting of blocks where required,
compaction with plate vibrator, curing, all labour,
materials, tools, wastage and incidentals complete
in all respects
Providing and applying decorative polyurethane
(PU) based road coating in approved colours and
patterns over paved surface, including surface
preparation by cleaning/grinding, application of
compatible primer, minimum two coats of PU paint,
addition of anti-skid aggregate where required,
complete with all labour, materials, tools,
scaffolding and protection, complete in all respects
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
13 concret as per approved design and including Rmt. 205.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
rolled curved railing as per circle radius, SS base
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
(New Design) Flower bed type CC road divider
stone 750mm x 230 mm x 170 mm, Supply & Fixing
in line & level, jointing in cement slury, supporting
with lodhiya 75 x 75 x 75 mm in CC of 1:2:4 on
Outer the sides, removal of excavated stuff, filling
40 cm with murrum provided by contractor, prime
coat in oil paint
and paint in different shades as per drawing /
instruction by engineer in site (with necessary steel
Providing, supplying and fixing decorative outdoor
cast iron dustbin of capacity 100–120 litres, made
from heavy-duty cast iron body with ornamental
panels, complete with top hinged / liftable cover,
internal removable MS/HDPE liner, corrosion-
resistant primer + two coats of exterior grade
enamel / PU paint (dark grey/black as approved),
smooth edges, drain holes at base, and weather-
17 resistant construction suitable for urban roads, Nos. 5.00 ₹ 26,625.00 ₹
footpaths, gardens and public places, including all
fittings, fasteners, anchoring bolts, fixing on RCC
base / hard surface, transportation, loading-
unloading, labour, tools, complete in all respects as
per approved sample and drawing.
Providing, carving, supplying and fixing decorative
outdoor heritage stone bench of approved design
and size 2000 mm (L) × 600 mm (W) × 450 mm (H),
made from machine-cut and hand-carved natural
stone (Dhrangadhra sandstone / approved
equivalent), comprising solid seat slab, fully carved
ornamental backrest with lattice pattern, carved
side arms and solid stone legs, including complete
hand carving, machine cutting, fine polishing and
edge rounding, providing SS dowels/stone pins and
epoxy/white cement slurry for fixing, placing on
prepared hard surface, proper alignment and
levelling, including all materials, labour, tools,
transportation, loading-unloading, fixing at site and
making good, complete in all respects as directed
by Engineer-in-Charge.
Providing, carving, supplying, transporting and
fixing decorative classical female garden statue of
approved design, 5’-0” overall height, made from
single block of superior quality white natural stone
(Makrana / approved equivalent), fully hand-carved
with fine sculptural detailing of face, drapery and
form, machine and hand polished to uniform white
finish, including all wastage, provision of internal
19 stainless steel/non-corrosive dowel pins, fixing on Nos. 1.00 ₹ 160,000.00 ₹
approved stone/RCC pedestal using epoxy adhesive
or non-shrink grout, complete with surface
cleaning, protection, loading–unloading, all labour,
tools, tackles, scaffolding, transportation, taxes,
royalties and all incidental works, complete in all
respects as directed by Engineer-in-Charge.
Providing, supplying and planting low ornamental
hedge plants such as Duranta gold / Boxwood /
Alternanthera of approved variety, 250–300 mm
height at planting, planted at 200 mm center-to-
center spacing in straight or curved alignment as
per approved layout, including excavation of trench
up to 300 mm depth, removal of unsuitable
20 material, refilling with approved garden soil mixed Rmt. 110.00 ₹ 650.00 ₹
with organic manure and sand in proportion 2:1:1,
leveling, watering, initial pruning, regular trimming,
replacement of dead plants, and maintenance for
90 days, complete in all respects as directed by
Engineer-in-Charge.
Providing and developing lawn with Doob grass
(Cynodon dactylon) by turfing method using healthy
and well-grown turf, including excavation and
surface dressing up to 150 mm depth, supplying
and spreading approved garden soil mixed with
manure and sand in proportion 2:1:1, fine leveling,
laying turf pieces closely jointed, rolling, watering,
removal of weeds, replacement of damaged turf,
and maintenance for 90 days, complete in all
respects as directed by Engineer-in-Charge.
Providing, supplying and planting pre-trained
ornamental topiary shrubs in ball or cone shape
such as Ficus panda / Murraya exotica / Thuja
dwarf, 600–900 mm height, including excavation of
pits of suitable size, supplying and filling with
22 approved garden soil mixed with organic manure Nos. 5.00 ₹ 1,650.00 ₹
and sand in proportion 2:1:1, planting, firming,
watering, staking if required, replacement of dead
plants, shaping and maintenance for 90 days,
complete in all respects as directed by Engineer-in-
Providing, supplying and planting tall evergreen
hedge plants such as Thuja orientalis / Polyalthia
longifolia (Ashoka), 1.8–2.4 m height at planting,
planted at 750–900 mm center-to-center spacing,
including excavation of pits, supplying and refilling
with approved garden soil mixed with organic
manure and sand in proportion 2:1:1, straight
alignment, watering, staking where required,
replacement of dead plants, and maintenance for
90 days, complete in all respects as directed by
Engineer-in-Charge.
Providing, supplying and planting seasonal
flowering plants such as Petunia / Phlox / Dianthus /
Vinca of approved colour and variety, healthy and
well-rooted, planted at 200–250 mm center-to-
center spacing in prepared flower beds, including
excavation up to 300 mm depth, soil preparation
24 with approved garden soil mixed with organic Sqm. 80.00 ₹ 1,015.00 ₹
manure and sand in proportion 2:1:1, leveling,
watering, replacement of damaged plants during
maintenance period, and maintenance for 90 days,
complete in all respects as directed by Engineer-in-
Providing, supplying and planting one central
feature plant suitable for traffic circle such as Cycas
revoluta / Bottle Palm / Traveller Palm / Ficus panda
(as approved), healthy and well-grown, 1.5 m to
m overall height, including excavation of pit of size
1.0 m × 1.0 m × 1.0 m, removal of unsuitable
material, refilling with approved garden soil,
organic manure and sand in proportion 2:1:1,
proper planting, firming, watering, providing
temporary support if required, replacement of
dead plant, and complete maintenance for 90 days,
complete in all respects as directed by Engineer-in-
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
liminance coefficinet on cemend road shalll be min
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, supplying, erecting, testing and
commissioning decorative aluminium pole light of
2.90 m overall height, complete with heavy-duty
aluminium pole, cast aluminium base and
aluminium post-top double arm luminaire, fitted
with 2 × 50 W high-efficiency Bridgelux LED
modules, Nextor make LED driver with required
surge protection, internal copper wiring, PP powder-
coated finish suitable for outdoor conditions,
28 Havells make MCB with in-pole connector strip, Nos. 10.00 ₹ 16,100.00 ₹
including pole mounting hardware, base plate,
anchor bolts, electrical terminations, earthing
provision, transportation, unloading, installation,
alignment, testing, commissioning at site, and
providing 2-year warranty on luminaires, complete
in all respects as per approved drawing, sample and
technical specifications.
Providing and fixing LED Spike Light (9W–12W) for
outdoor landscape applications, complete with LED
driver, IP65 protection, die-cast aluminium housing
with powder-coated finish, clear/toughened glass
diffuser, suitable spike rod for soil fixing,
tiltable/adjustable mounting bracket, waterproof
connectors, screws and fasteners, making all
waterproof electrical joints, placing spike firmly into
soil, angle adjustment, connection to power supply,
testing and commissioning, including all labour,
materials, tools and tackles, complete in all respects
as directed by Engineer-in-Charge.
Providing and fixing LED Focus Light (30W–50W,
COB type) with IP66 protection, die-cast aluminium
body with powder-coated finish, tempered front
glass, high-efficiency reflector optics, adjustable
tiltable mounting bracket, surge protection ≥4 kV,
complete with external or in-built LED driver,
waterproof connectors, mounting clamps, nuts and
bolts, including aiming adjustment, installation,
testing and commissioning, all labour, materials,
tools and tackles, complete in all respects as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
34 aluminium strips, rubber grommets, rib, bakelite Sqm. 1.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated panel board (i) with 350 mm
providing and erecting Miniature circuit breaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
36 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
37 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
38 breaking capacity & confirms to IS :8828 in existing Ea. 3.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
41 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
42 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
43 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
40Amps. FP Cat. III
providing and erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
44 V,50Hz. having characteristic of quick action & Ea. 3.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
46 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
47 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
49 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 10.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
50 to be laid on wall with necessary clamps or in Rn.Mtr 175.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
51 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 30.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
52 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 30.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
53 in existing trench / pipe at road crossing or floor Rn.Mtr 30.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
54 in existing trench / pipe at road crossing or floor Rn.Mtr 30.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
55 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 1.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
58 Compound (BFC) suitable for safe earthing device. Ea. 10.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF BAPA SITARAM CIRCLE UNDER MORBI MUNICIPAL CORPORATION
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF BAPA SITARAM CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT MORBI.
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 493.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 210.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 3285.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 329.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 10.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing and laying precast cement concrete
square paving blocks of size 150×150 mm,
minimum 60 mm thick, M35 grade, factory
manufactured, laid over 25–30 mm thick coarse
sand bedding on prepared and compacted base,
11 including filling of joints with fine sand, proper line, Sqm. 2805.00 ₹ 1,500.00 ₹
level and slope, cutting of blocks where required,
compaction with plate vibrator, curing, all labour,
materials, tools, wastage and incidentals complete
in all respects
Providing and applying decorative polyurethane
(PU) based road coating in approved colours and
patterns over paved surface, including surface
preparation by cleaning/grinding, application of
compatible primer, minimum two coats of PU paint,
addition of anti-skid aggregate where required,
complete with all labour, materials, tools,
scaffolding and protection, complete in all respects
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
13 concret as per approved design and including Rmt. 1618.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
15 rolled curved railing as per circle radius, SS base Rmt. 60.00 ₹ 3,650.00 ₹
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
Providing, supplying, transporting and installing
joinable precast GFRC middle planter module of
approved design, circular / faceted form, overall
ft (750 mm) diameter and 1.5 ft (450 mm) height,
manufactured in M30 grade concrete, machine-
vibrated and cast in steel moulds, with minimum
mm thick walls, internal cavity suitable for planting,
finished with smooth exposed concrete / oxide
cement finish as approved.
Providing, supplying, transporting and installing
joinable precast GFRC end bench module of
approved design, 2.5 ft (750 mm) diameter
footprint and 1.5 ft (450 mm) height, designed for
17 seating use, manufactured in M30 grade reinforced Nos. 12.00 ₹ 15,500.00 ₹
concrete, machine-vibrated, cast in steel moulds,
with smooth exposed concrete / oxide cement
Providing, supplying, transporting and installing
joinable precast GFRC end planter module of
approved design, 2.5 ft (750 mm) diameter and
ft (450 mm) height, manufactured in M30 grade
18 reinforced concrete, suitable for terminating Nos. 8.00 ₹ 18,500.00 ₹
modular seating-planter arrangement, with internal
planting cavity and smooth exposed concrete /
oxide cement finish.
Providing, supplying, transporting and installing
joinable precast GFRC middle bench module of
approved design, 2.5 ft (750 mm) diameter and
ft (450 mm) height, suitable for modular seating
19 arrangements in urban roadside and pocket garden Nos. 20.00 ₹ 17,500.00 ₹
areas, manufactured in M30 grade reinforced
concrete, machine-vibrated and cast in precision
(New Design) Flower bed type CC road divider
stone 750mm x 230 mm x 170 mm, Supply & Fixing
in line & level, jointing in cement slury, supporting
with lodhiya 75 x 75 x 75 mm in CC of 1:2:4 on
Outer the sides, removal of excavated stuff, filling
40 cm with murrum provided by contractor, prime
coat in oil paint
and paint in different shades as per drawing /
instruction by engineer in site (with necessary steel
Brick work using common burnt clay building bricks
having crushing strength not less than
21 kg./Sq.Cm. in foundation and plinth in Cement Cum. 4.00 ₹ 4,203.06 ₹
Mortar 1:5. (1- Cement : 5 -fine sand)(B)
Providing and fixing natural stone cladding on
external wal lusing approved stone type
(Dhrolpuri/Dholpur/Kota/Sandstone/Granite), in
20–25mm or 25–30mm thickness, including:
Machine-cut stone slabs of approved colour &
finish Cement mortar backing (1:4) 10–12mm thick
Slurry coat (cement + polymer bonding agent ) on
the back of stone Fixing in line / level with spacers
Filling joints with matching non-shrink grout Edge
finishing, surface cleaning & curing Scaffolding,
transportation, loading unloading,complete As per
drawings & Engineer-in-charge.
Design, manufacture, supply and installation of
premium outdoor litter bin of approx. 60–80 litre
capacity, comprising internal removable MS waste
container made from minimum 1.6 mm thick CRCA
sheet with powder-coated finish, enclosed with
vertical hardwood slats of minimum 25 mm
23 thickness fixed on MS frame, including laser-cut top Nos. 15.00 ₹ 20,000.00 ₹
cover with waste opening, concealed
hinges/handles, corrosion-resistant fasteners, anti-
termite treatment to wood, exterior weather-
resistant coating, complete in all respects as per
approved design and drawings
Providing and developing lawn in road
median/roadside including: Removing debris,
rubbish & leveling the area Dressing of surface &
soil loosening (100–150 mm deep) Mixing of
manure/compost (3–5 kg per sqm) Application of
NPK basal fertilizer Supplying & laying turf grass
(Doob grass / Selection-1 / Mexican / Carpet grass)
Rolling & light compaction Initial watering 30-day
maintenance including weeding, pest control &
replacement All labour, materials, tool & tackles,
loading–unloading, transportation complete As per
horticulture specifications & directions of Engineer-
Providing, supplying and planting urban roadside
tree of approved shade / ornamental species such
as Neem, Karanj, Peepal (ornamental form),
Bauhinia, Cassia, Tabebuia, Plumeria, Pongamia or
equivalent, having straight stem with minimum
clear stem height of 1.2–1.4 m and overall height of
1.8–2.2 m above finished ground level, grown in
polybag or rootball, including excavation of pit of
size 0.75 m × 0.75 m × 0.75 m, refilling with
approved good quality garden soil mixed with
organic manure and fertilizers, planting, watering,
fixing with two bamboo/wooden stakes, providing
and fixing MS tree guard, and maintenance
including watering, weeding, manure application
and replacement of dead plants for a period of
months, complete in all respects as directed by
Engineer-in-Charge.
Providing, supplying, planting and maintaining
complete plantation and soft landscaping works in
circular planters and landscaped areas, including
seasonal flowering plants, groundcover plants,
lawn, hedge plantation and ornamental shrubs,
comprising excavation of pits and beds in all kinds
of soil, preparation of planting media with
approved garden soil, red soil and well-
26 decomposed farmyard manure, supply of healthy Sqm. 30.00 ₹ 1,550.00 ₹
nursery-grown plants, transportation to site,
planting, watering, trimming, shaping, replacement
of dead plants and maintenance for a minimum
period of 30 days, complete in all respects as per
approved drawings and directions of Engineer-in-
Charge, including all labour, materials, tools, taxes,
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
27 liminance coefficinet on cemend road shalll be min Sqm. 612.00 ₹ 364.08 ₹
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, fabricating, supplying and fixing 6.0 m
high hot-dip galvanized MS tubular street light pole
with double-arm swan neck bracket, made from
tapered tubular sections (bottom Ø114.3 mm,
middle Ø88.9 mm, top Ø76.1 mm), complete with
base plate 250×250×8 mm, M12 × 600 mm J-type
foundation bolts, suitable for mounting two LED
29 luminaires of 100 W each, including provision for Nos. 35.00 ₹ 14,950.00 ₹
1500×900 mm middle frame/signage mounting,
internal wiring, NexTor make LED driver, all
necessary clamps, fasteners, hardware, surface
preparation, factory fabrication, erection,
alignment, testing and commissioning at site,
complete as directed by Engineer-in-Charge.
Providing, fabricating, supplying, installing, testing
and commissioning 6.0 m high decorative GI pole
light, made from GI tubular sections (L1 – 1150 mm,
L2 – 33 mm OD × 3 mm thick), with multi-arm
crown design, fitted with 20 Nos. 12 W LED
luminaires and 30 Nos. 6 W LED downlights, using
Bridgelux make LEDs and Fulham make drivers,
including internal wiring, junctions, 1500 mm dia ×
12 mm thick base plate, PP powder-coated finish,
all nuts, bolts, clamps, erection, alignment,
electrical connections, testing and commissioning
complete, including installation charges, with 2-
year luminaire warranty, complete as directed by
Engineer-in-Charge.
Providing, supplying, transporting,erecting, testing
and commissioning 5.0 metre high decorative LED
pole light complete in all respects, made from GI
tubular pole (114mm OD bottom section–2.0m &
76mm OD top section–3.0 m ) with PP powder
coated finish, fitted with aluminium post-top LED
luminaire of 500 mm diameter,equipped with
Watt LED module using high-efficiency LED chips
and electronic driver, including base plate
200×200×8mmthick, 600 mm long 12mm dia J type
foundation bolts with nuts & washers, internal
wiring with MCB and connector strip, complete
installation, alignment, electrical connections,
testing and commissioning at site, including all
materials, labour, tools, tacklesand incidentals,as
directed by Engineer-in-Charge.
Providing and fixing LED Spike Light (9W–12W) for
outdoor landscape applications, complete with LED
driver, IP65 protection, die-cast aluminium housing
with powder-coated finish, clear/toughened glass
diffuser, suitable spike rod for soil fixing,
tiltable/adjustable mounting bracket, waterproof
connectors, screws and fasteners, making all
waterproof electrical joints, placing spike firmly into
soil, angle adjustment, connection to power supply,
testing and commissioning, including all labour,
materials, tools and tackles, complete in all respects
as directed by Engineer-in-Charge.
Providing and fixing LED Inground Light (12W–18W)
suitable for outdoor walkable/drive-over
applications, having IP67 protection, SS-316
stainless steel top ring, die-cast aluminium housing,
toughened top glass, integrated high-efficiency LED
module with beam angle 15° to 45°, complete with
external or in-built LED driver, mounting
sleeve/housing can, clamps, stainless steel
33 fasteners, IP67 waterproof connectors, making all Nos. 20.00 ₹ 5,800.00 ₹
waterproof electrical joints, embedding the
luminaire in prepared pit over PCC bed, proper
levelling and alignment flush with finished surface,
installation, testing and commissioning, including all
materials, labour, tools and tackles, complete in all
respects as directed by Engineer-in-Charge.
Providing and fixing LED Focus Light (30W–50W,
COB type) with IP66 protection, die-cast aluminium
body with powder-coated finish, tempered front
glass, high-efficiency reflector optics, adjustable
tiltable mounting bracket, surge protection ≥4 kV,
complete with external or in-built LED driver,
waterproof connectors, mounting clamps, nuts and
bolts, including aiming adjustment, installation,
testing and commissioning, all labour, materials,
tools and tackles, complete in all respects as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
38 aluminium strips, rubber grommets, rib, bakelite Sqm. 2.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated panel board (i) with 350 mm
providing and erecting Miniature circuit breaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
40 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
41 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
42 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
45 without MCB to house appropriate nos. of Ea. 10.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
46 without MCB to house appropriate nos. of Ea. 10.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
47 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
40Amps. FP Cat. III
providing and erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
48 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
50 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
51 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
53 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 85.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
54 to be laid on wall with necessary clamps or in Rn.Mtr 1000.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
55 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 50.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
56 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 75.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
57 in existing trench / pipe at road crossing or floor Rn.Mtr 75.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
58 in existing trench / pipe at road crossing or floor Rn.Mtr 75.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
59 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 5.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
62 Compound (BFC) suitable for safe earthing device. Ea. 90.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF VEER BHOJA BAPA CIRCLE UNDER MORBI MUNICIPAL CORPORATION
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF VEER BHOJA BAPA CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 93.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 20.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 620.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 63.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 41.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing and laying precast cement concrete
square paving blocks of size 150×150 mm,
minimum 60 mm thick, M35 grade, factory
manufactured, laid over 25–30 mm thick coarse
sand bedding on prepared and compacted base,
11 including filling of joints with fine sand, proper line, Sqm. 600.00 ₹ 1,500.00 ₹
level and slope, cutting of blocks where required,
compaction with plate vibrator, curing, all labour,
materials, tools, wastage and incidentals complete
in all respects
Providing and applying decorative polyurethane
(PU) based road coating in approved colours and
patterns over paved surface, including surface
preparation by cleaning/grinding, application of
compatible primer, minimum two coats of PU paint,
addition of anti-skid aggregate where required,
complete with all labour, materials, tools,
scaffolding and protection, complete in all respects
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
13 concret as per approved design and including Rmt. 412.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
rolled curved railing as per circle radius, SS base
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
Providing and carrying out complete renovation,
restoration and repainting of existing equestrian
statue including rider, horse, pedestal/base and
decorative canopy (chhatri), comprising thorough
surface cleaning by wire/nylon brushing and water
jet, removal of old loose paint, dirt, algae and bird
droppings, inspection and filling of cracks, joints
and damaged portions with approved epoxy
putty/polymer modified repair mortar, minor
replastering and profile correction of pedestal and
ornamental elements, application of anti-fungal
treatment and suitable exterior grade primer,
followed by minimum two coats of premium
exterior weather-resistant acrylic/enamel paint in
approved colours with fine detailing, including all
labour, materials, scaffolding, tools, safety
arrangements, protection of surroundings, curing,
cleaning after completion and complete in all
respects as per directions of Engineer-in-Charge.
Providing and fixing natural sandstone wall cladding
on existing RCC / masonry wall surface, using
approved quality natural sandstone slabs of 25–30
mm thickness (Dhrangadhra / Jodhpur / approved
equivalent), machine-cut and dressed, fixed in
horizontal coursed pattern as approved, over
prepared substrate using cement mortar 1:3
(cement : coarse sand) including cleaning and
17 roughening of base surface, proper alignment, Sqm. 113.00 ₹ 2,750.00 ₹
levelling, true to line and plumb.
The item includes raking of joints, pointing with
matching shade cement slurry, curing, scaffolding,
handling, hoisting, wastage, all labour, materials,
tools and tackles, complete in all respects as per
drawings, specifications and direction of Engineer-
Providing, fabricating and fixing Mild Steel (MS)
safety grill on top of compound / boundary wall, of
approved design and pattern, fabricated from MS
square/round bars (minimum 12 mm vertical
members) with MS flats 25×6 mm or equivalent
horizontal members, height 450–600 mm as
directed, including cutting, welding, grinding
smooth, finishing edges and making panels true to
line and level.
18 The grill shall be fixed over RCC coping / beam using Rmt. 75.00 ₹ 2,950.00 ₹
anchor bolts or chemical anchors, including all
necessary clamps, base plates, nuts and bolts. The
item includes surface preparation, one coat of red
oxide zinc chromate primer and two coats of
approved synthetic enamel paint, scaffolding, all
labour, materials, transportation and complete in
Providing and planting low height seasonal
flowering plants in prepared planter beds / traffic
circle, in existing soil, including supplying healthy,
disease-free plants of approved varieties such as
Vinca (Sadabahar), Alternanthera, Portulaca,
Petunia, Gazania or equivalent, having plant height
150–300 mm, planting in uniform circular pattern
19 at 200–250 mm c/c spacing, including digging pits, Sqm. 15.00 ₹ 550.00 ₹
application of manure at plant base, watering,
initial maintenance for 30 days, replacement of
dead plants, removal of debris, all labour, tools,
leads and lifts, and complete in all respects as
directed by Engineer-in-Charge.
Providing and planting low height ornamental
flowering plantation in continuous hedge pattern
along traffic circle / monument frontage,
comprising seasonal flowering plants such as Vinca
(Sadabahar), Petunia and Zinnia in pink and white
shades, planted in proper alignment and spacing,
including supplying healthy nursery-grown plants
20 (minimum 6–8 leaves, well-rooted), preparation of Sqm. 20.00 ₹ 700.00 ₹
planting beds with existing approved soil (soil
supply excluded), layout, planting, watering, initial
maintenance, replacement of dead plants during
defect liability period, all labour, tools, equipment
and incidentals, complete in all respects as directed
by Engineer-in-Charge.
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
liminance coefficinet on cemend road shalll be min
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, supplying, erecting, testing and
commissioning 6.0 m high heavy-duty decorative
cast iron pole light weighing approx. 210–250 kg,
comprising cast iron pole shaft with decorative cast
iron base and post-top arms, fitted with 5 Nos.
W LED luminaires of 72 W each using Bridgelux LED
chips and Fulham electronic drivers, factory
finished with PP powder coating suitable for
outdoor conditions, complete with MS base plate,
hot-dip galvanized anchor/J-bolts with nuts,
washers and templates, pole mounting
arrangement, complete internal wiring with copper
conductors, connectors, earthing provision, fixing
accessories, alignment, installation, testing and
commissioning at site, complete in all respects as
per approved drawing and directions of Engineer-in-
Providing, supplying, transporting,erecting, testing
and commissioning 5.0 metre high decorative LED
pole light complete in all respects, made from GI
tubular pole (114mm OD bottom section–2.0m &
76mm OD top section–3.0 m ) with PP powder
coated finish, fitted with aluminium post-top LED
luminaire of 500 mm diameter,equipped with
Watt LED module using high-efficiency LED chips
and electronic driver, including base plate
200×200×8mmthick, 600 mm long 12mm dia J type
foundation bolts with nuts & washers, internal
wiring with MCB and connector strip, complete
installation, alignment, electrical connections,
testing and commissioning at site, including all
materials, labour, tools, tacklesand incidentals,as
directed by Engineer-in-Charge.
Providing and fixing LED Spike Light (9W–12W) for
outdoor landscape applications, complete with LED
driver, IP65 protection, die-cast aluminium housing
with powder-coated finish, clear/toughened glass
diffuser, suitable spike rod for soil fixing,
tiltable/adjustable mounting bracket, waterproof
connectors, screws and fasteners, making all
waterproof electrical joints, placing spike firmly into
soil, angle adjustment, connection to power supply,
testing and commissioning, including all labour,
materials, tools and tackles, complete in all respects
as directed by Engineer-in-Charge.
Providing and fixing LED Focus Light (30W–50W,
COB type) with IP66 protection, die-cast aluminium
body with powder-coated finish, tempered front
glass, high-efficiency reflector optics, adjustable
tiltable mounting bracket, surge protection ≥4 kV,
complete with external or in-built LED driver,
waterproof connectors, mounting clamps, nuts and
bolts, including aiming adjustment, installation,
testing and commissioning, all labour, materials,
tools and tackles, complete in all respects as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
30 aluminium strips, rubber grommets, rib, bakelite Sqm. 1.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated panel board (i) with 350 mm
providing and erecting Miniature circuit breaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
32 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
33 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
34 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
37 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
38 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
39 V,50Hz. having characteristic of quick action & Ea. 10.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
40Amps. FP Cat. III
providing and erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
40 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
42 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
43 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
45 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 20.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
46 to be laid on wall with necessary clamps or in Rn.Mtr 450.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
47 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 50.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
48 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 50.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
49 in existing trench / pipe at road crossing or floor Rn.Mtr 50.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
50 in existing trench / pipe at road crossing or floor Rn.Mtr 50.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
51 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 2.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
54 Compound (BFC) suitable for safe earthing device. Ea. 20.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SUPER TALKIES CIRCLE UNDER MORBI MUNICIPAL CORPORATION
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SUPER TALKIES CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT MORBI.
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 61.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Providing and filling good quality garden soil mix in
required areas, including supplying screened fertile
topsoil mixed with well-decomposed organic
manure (FYM/Compost) in the ratio of 70:30, free
from stones, weeds, debris, and harmful salts;
spreading in layers not exceeding 200 mm
3 thickness, watering, leveling, breaking clods, and Cum. 17.00 ₹ 650.00 ₹
compaction by light ramming to achieve required
density, including all labour, materials,
loading–unloading, transportation to site, tools &
tackles, and complete as directed by Engineer-in-
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
6 proper compaction (with watering) Sqm. 405.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
7 aggregates 40 mmnominal size) and curing Cum. 41.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
9 ceiling not exceeding 4 M. and removal of the same Sqm. 34.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
Providing and laying precast cement concrete
square paving blocks of size 150×150 mm,
minimum 60 mm thick, M35 grade, factory
manufactured, laid over 25–30 mm thick coarse
sand bedding on prepared and compacted base,
11 including filling of joints with fine sand, proper line, Sqm. 375.00 ₹ 1,500.00 ₹
level and slope, cutting of blocks where required,
compaction with plate vibrator, curing, all labour,
materials, tools, wastage and incidentals complete
in all respects
Providing and applying decorative polyurethane
(PU) based road coating in approved colours and
patterns over paved surface, including surface
preparation by cleaning/grinding, application of
compatible primer, minimum two coats of PU paint,
addition of anti-skid aggregate where required,
complete with all labour, materials, tools,
scaffolding and protection, complete in all respects
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
13 concret as per approved design and including Rmt. 220.00 ₹ 371.21 ₹
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
Double coat enemal paint with primer coat
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
rolled curved railing as per circle radius, SS base
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
Providing, supplying and planting low height
flowering ornamental shrubs (Ixora coccinea /
equivalent approved variety), healthy and bushy,
minimum 300–450 mm height at time of planting,
in continuous plantation beds along road/pavement
edges as per approved layout, including excavation
of pits/trenches, supplying and mixing well-
decomposed farm yard manure with existing soil,
16 proper alignment and spacing at 300–350 mm c/c, Sqm. 12.00 ₹ 750.00 ₹
planting, watering immediately after planting, initial
care and maintenance, replacement of dead plants
during defect liability period, complete with all
labour, plants, manure, tools, tackles, leads and
lifts, but excluding cost of garden soil only,
complete in all respects as directed by Engineer-in-
Providing, supplying and planting dense evergreen
hedge plants (Duranta golden / Clerodendrum
inerme / Murraya paniculata or equivalent
approved variety), healthy and well-branched,
minimum 450–600 mm height at time of planting,
in continuous hedge formation along
road/footpath/median edges as per approved
layout, including excavation of continuous trench,
supplying and mixing well-decomposed farm yard
manure with existing soil, planting at close spacing
of 200–250 mm c/c to achieve uniform thick hedge,
watering immediately after planting, initial
trimming to shape, maintenance and replacement
of dead plants during defect liability period,
complete with all labour, plants, manure, tools,
tackles, leads and lifts, but excluding cost of garden
soil only, complete in all respects as directed by
Engineer-in-Charge.
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
liminance coefficinet on cemend road shalll be min
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
dirt, dust and other foreign matter. (i) Over 10cm in
ELECTRICAL WORK
Providing, supplying, erecting, testing and
commissioning 6.0 m high heavy-duty decorative
cast iron pole light weighing approx. 210–250 kg,
comprising cast iron pole shaft with decorative cast
iron base and post-top arms, fitted with 5 Nos.
W LED luminaires of 72 W each using Bridgelux LED
chips and Fulham electronic drivers, factory
finished with PP powder coating suitable for
outdoor conditions, complete with MS base plate,
hot-dip galvanized anchor/J-bolts with nuts,
washers and templates, pole mounting
arrangement, complete internal wiring with copper
conductors, connectors, earthing provision, fixing
accessories, alignment, installation, testing and
commissioning at site, complete in all respects as
per approved drawing and directions of Engineer-in-
Providing, supplying, transporting,erecting, testing
and commissioning 5.0 metre high decorative LED
pole light complete in all respects, made from GI
tubular pole (114mm OD bottom section–2.0m &
76mm OD top section–3.0 m ) with PP powder
coated finish, fitted with aluminium post-top LED
luminaire of 500 mm diameter,equipped with
Watt LED module using high-efficiency LED chips
and electronic driver, including base plate
200×200×8mmthick, 600 mm long 12mm dia J type
foundation bolts with nuts & washers, internal
wiring with MCB and connector strip, complete
installation, alignment, electrical connections,
testing and commissioning at site, including all
materials, labour, tools, tacklesand incidentals,as
directed by Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
25 aluminium strips, rubber grommets, rib, bakelite Sqm. 1.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated
providing panel board
and erecting (i) withcircuit
Miniature 350 mmbreaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
27 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
28 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
29 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
32 without MCB to house appropriate nos. of Ea. 2.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
33 without MCB to house appropriate nos. of Ea. 2.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
34 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
35 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
37 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
38 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
40 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 10.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
41 to be laid on wall with necessary clamps or in Rn.Mtr 200.00 ₹ 92.00 ₹
existing trench / pipe of following size of cables. (B)
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
42 1.1 KV. to be laid on wall with necessary clamps or Rn.Mtr 50.00 ₹ 207.00 ₹
in existing trench / pipe of following size of cables
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
43 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 35.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
44 in existing trench / pipe at road crossing or floor Rn.Mtr 35.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
45 in existing trench / pipe at road crossing or floor Rn.Mtr 35.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
46 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 2.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
49 Compound (BFC) suitable for safe earthing device. Ea. 10.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SHOBESHWAR ROAD CIRCLE UNDER MORBI MUNICIPAL
CORPORATION AREA AT MORBI.
RECAPITULATION SHEET
Sr No. Description Amount
1 DISMENTALING & EXCAVATION ₹
4 ELECTRICAL WORK ₹
MORBI MUNICIPAL CORPORATION
NAME OF WORK :- DEVELOPMENT OF SHOBESHWAR ROAD CIRCLE UNDER MORBI MUNICIPAL CORPORATION AREA AT
Sr No. Description Unit Quantity Rate Amount
DISMENTALING & EXCAVATION
Demolition including stacking of serviceable
1 materilas anddisposal of unserviceable materials Cum. 93.00 ₹ 1,071.63 ₹
with all lead and lift. (i) R.C.C. work
Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
All lead and Lift.(B) Dense or Hard soil
Supply & Laying of Black Trap Metal of size 3.8-7 cm
Supply and laying of Black Stone Powder / Dust
Rolling work with Roller 8-10 Ton capacity over
metalling murrum for soling or single layer arriving
5 proper compaction (with watering) Sqm. 620.00 ₹ 9.00 ₹
Providing and laying cement concrete 1:3:6 (1-
Cement : 3 coarse sand : 6- hand broken stone
6 aggregates 40 mmnominal size) and curing Cum. 64.00 ₹ 3,064.60 ₹
complete excluding cost of formwork in (A)
Foundation and Plinth
Providing and laying controlled cement concrete
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base of
columns and Mass concrete
Providing formwork of ordinary timber planking so
as to give a rough finish including centering
shuttering strutting and propping etc. Height of
propping and centering below supporting floor to
8 ceiling not exceeding 4 M. and removal of the same Sqm. 86.00 ₹ 178.61 ₹
for in situ reinforced concrete and plain concrete
work in. (A) Foundations Footings Bases of Columns
etc. and Mass concrete.
Providing TMT Bar FE 500D reinforcement for R.C.C.
work including bending, binding and placing in
position complete upto floor two level
(New Design) Flower bed type CC road divider
stone 750mm x 230 mm x 170 mm, Supply & Fixing
in line & level, jointing in cement slury, supporting
with lodhiya 75 x 75 x 75 mm in CC of 1:2:4 on
Outer the sides, removal of excavated stuff, filling
40 cm with murrum provided by contractor, prime
coat in oil paint and paint in different shades as per
drawing / instruction by engineer in site (with
necessary steel in joint)
Providing, supplying and fixing stainless steel railing
in SS 304 grade for traffic circle / central island
around statue pedestal, 1050–1100 mm high,
consisting of Ø50 mm × 1.5 mm thick SS top
handrail, Ø38 mm × 1.5 mm thick SS vertical posts
at 1200 mm c/c, two horizontal infill members of
Ø25 mm × 1.2 mm thick SS pipes, including machine-
rolled curved railing as per circle radius, SS base
plates 100×100×6 mm, SS anchor fasteners,
welding, grinding, buffing/satin finish, alignment,
leveling, all fixtures, fittings, tools, labour and
complete fixing in position, complete in all respects
as directed by Engineer-in-Charge.
Providing and laying decorative interlocking cement
concrete paver block pavement of approved colour
combination and geometric pattern as shown, using
minimum 60 mm thick factory-made vibro-pressed
concrete paver blocks conforming to IS 15658, laid
over 50 mm thick well-levelled and compacted
12 coarse sand bedding, including preparation of base, Sqm. 340.00 ₹ 1,250.00 ₹
alignment and setting out, cutting of paver blocks
to shape, joint filling with fine sand, compaction
using mechanical plate vibrator, finishing, curing,
and including all materials, labour, tools, leads and
lifts, complete as directed by Engineer-in-Charge.
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250 grade
concret as per approved design and including
excavation for fixing in proper line and level,filling
13 the joint with C:M 1:3 (1cement:3fine sand) etc Rmt. 305.00 ₹ 371.21 ₹
Double coat enemal paint with primer coat
Design, manufacture, supply and installation of
premium outdoor litter bin of approx. 60–80 litre
capacity, comprising internal removable MS waste
container made from minimum 1.6 mm thick CRCA
sheet with powder-coated finish, enclosed with
vertical hardwood slats of minimum 25 mm
thickness fixed on MS frame, including laser-cut top
15 cover with waste opening, concealed Nos. 8.00 ₹ 20,000.00 ₹
hinges/handles, corrosion-resistant fasteners, anti-
termite treatment to wood, exterior weather-
resistant coating, complete in all respects as per
approved design and drawings
Providing, fabricating, supplying and installing
vertical wayfinding / directional signage totem, of
approved size and proportions (approx. 450 × 450 ×
2100 mm or as specified), fabricated from mild
steel box sections / plates to form a rigid self-
supporting structure, including internal stiffeners,
base plate and all necessary welds. The signage
faces shall be formed using translucent acrylic /
polycarbonate panels with UV digital printed
graphics on backlit areas and non-backlit UV print /
vinyl graphics on opaque areas, as per approved
artwork and colour scheme. The system shall
include integrated internal LED backlighting (white
16 or RGB as specified) with uniform illumination, Nos. 3.00 ₹ 72,500.00 ₹
comprising LED modules/strips, drivers, wiring,
access provision for maintenance, and proper heat
dissipation. The complete unit shall be finished with
zinc-rich primer and exterior-grade PU paint /
powder coating on metal surfaces.The item
includes erection, fixing on RCC foundation or
pedestal using anchor bolts, alignment, electrical
connections, testing, commissioning, and making
good, complete in all respects as per approved
drawings, specifications and directions of Engineer-
Providing, fabricating, supplying, transporting and
erecting prefabricated mild steel structural
members for landmark / sculptural installation on
traffic circle, made from RHS / SHS / fabricated MS
sections conforming to IS 2062 (E250) / IS
including cutting, bending, rolling, welding by
certified welders, grinding smooth of exposed
welds, providing and welding MS base plates
providing and fixing high-tensile anchor bolts, nuts
and washers, loading, unloading, transportation to
site, handling, erection over RCC pedestal,
alignment, plumbing, levelling, tightening of bolts,
use of cranes / tools & tackles, scaffolding, safety
measures, touch-up after fixing, and all labour,
materials, leads, lifts and incidentals complete as
per approved drawings and direction of Engineer-in-
Providing and applying complete anti-corrosion
painting system to structural steel surfaces,
including surface preparation by shot blasting /
mechanical cleaning to Sa 2.5, application of epoxy
zinc-rich primer (60 microns DFT), epoxy
intermediate coat (80 microns DFT) and
polyurethane (PU) top coat (40 microns DFT) in
18 approved solid colour shade, achieving total Sqm. 210.00 ₹ 650.00 ₹
minimum 180 microns DFT, including all materials,
labour, tools, scaffolding, curing time between
coats, protection of finished surfaces, DFT
measurement with gauge, touch-ups, and cleaning,
complete as per specifications and direction of
Engineer-in-Charge.
Providing and fixing machine-cut natural granite
stone flooring of approved colour and texture (anti-
skid/flamed/leather finish as approved), 20–25 mm
thick, laid over 50 mm thick cement sand mortar
bedding (1:4) on RCC slab/raft, including edge
19 cutting, true alignment, levelling, filling joints with Sqm. 164.00 ₹ 2,375.00 ₹
matching epoxy/cement slurry, rubbing, cleaning,
curing, protection, and all materials, labour, tools,
leads and lifts, complete as per drawings and
direction of Engineer-in-Charge.
Providing, supplying and planting low ornamental
hedge plants such as Duranta gold / Boxwood /
Alternanthera of approved variety, 250–300 mm
height at planting, planted at 200 mm center-to-
center spacing in straight or curved alignment as
per approved layout, including excavation of trench
up to 300 mm depth, removal of unsuitable
20 material, refilling with approved garden soil mixed Rmt. 100.00 ₹ 650.00 ₹
with organic manure and sand in proportion 2:1:1,
leveling, watering, initial pruning, regular trimming,
replacement of dead plants, and maintenance for
90 days, complete in all respects as directed by
Engineer-in-Charge.
Road marking with hot applied thermoplastic paints
with reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 2.5 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes. zebra
patta /bump patta lane/center line/ edge line/cut
patta. The white color marking should provide
liminance coefficinet on cemend road shalll be min
130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day
time. The marking should meet the performance
criteria for night time reflectivity, wet reflectivity
and skid resistance as mentioned in the section-15
of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Painting lines, deashes, arrows, letters etc on roads,
Air fields and like in two coats with road marking
paint, brushing including cleaning the surface of all
22 dirt, dust and other foreign matter. (i) Over 10cm in Sqm. 40.00 ₹ 128.99 ₹
ELECTRICAL WORK
Providing, fabricating, supplying and fixing 6.0 m
high hot-dip galvanized MS tubular street light pole
with double-arm swan neck bracket, made from
tapered tubular sections (bottom Ø114.3 mm,
middle Ø88.9 mm, top Ø76.1 mm), complete with
base plate 250×250×8 mm, M12 × 600 mm J-type
foundation bolts, suitable for mounting two LED
luminaires of 100 W each, including provision for
23 1500×900 mm middle frame/signage mounting, Nos. 5.00 ₹ 14,950.00 ₹
internal wiring, NexTor make LED driver, all
necessary clamps, fasteners, hardware, surface
preparation, factory fabrication, erection,
alignment, testing and commissioning at site,
complete as directed by Engineer-in-Charge.
Providing, supplying, installing, testing and
commissioning IP67-rated outdoor LED strip light in
warm white (3000K ±200K) suitable for traffic circle
/ median application, minimum 12–15 W/m power
consumption, high-lumen output ≥1000 lm/m, UV-
stable silicone encapsulation, mounted in anodized
aluminium extrusion with opal diffuser for glare
control, complete with matching IP67 constant-
24 voltage LED driver, connectors, mounting Rmt. 100.00 ₹ 1,350.00 ₹
clips/brackets, internal wiring with FRLS copper
cables in protective conduit, earthing, fixing on
concrete / steel surfaces, alignment, testing,
commissioning, and all labour, materials, tools,
leads and lifts, complete as per direction of
Engineer-in-Charge.
Providing and supplying Waterproof Junction Box of
IP67 protection rating, suitable for outdoor and
fountain lighting connections, made of high-
strength Polycarbonate/ABS/FRP/Aluminium (as
specified), UV-resistant, impact-resistant, and fully
sealed against water and dust ingress. Box shall
include stainless-steel screws, neoprene/silicone
gasket, waterproof cable glands, internal terminal
connectors/blocks, earthing provision, and
mounting brackets. Junction box to be used for
underwater light wiring terminations and low-
voltage distribution. Supplied complete with
accessories and installed securely as directed at
Providing & erecting PVC Corrugated Flexible
Conduit with required nos. of coupling, PVC bushes,
Check-nuts etc. complete of following sizes.(4)
Solder less crimping type Copper lugs conforming
to IS suitable for cable of following size evenly
crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated
nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 and above
protection as per approval from engineer incharge
made from 14 SWG thick CRC M.S. sheet for outer
body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of
inter connecting PVC copper wire / copper-
28 aluminium strips, rubber grommets, rib, bakelite Sqm. 1.00 ₹ 10,365.00 ₹
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles
with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice
board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size.(A)
locally fabricated
providing panel board
and erecting (i) withcircuit
Miniature 350 mmbreaker
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
30 breaking capacity & confirms to IS :8828 in existing Ea. 10.00 ₹ 573.00 ₹
box having following capacity (a)32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
31 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹
box having following capacity (b)40 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for
Motor & Inductive Load (C Curve) having 10KA
32 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 730.00 ₹
box having following capacity (b)63 Amp. Cat.III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity (B) 32 Amp.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB.
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
35 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,369.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Providing isolation type Sheet
erecting (PPI)(b) sheet
Steel steel double
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
36 without MCB to house appropriate nos. of Ea. 5.00 ₹ 3,836.00 ₹
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase
incoming and single phase horizontal type outgoing
Per phase isolation
providing type (PPI)(b)
and erecting sheet make
Approved steel double
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
37 V,50Hz. having characteristic of quick action & Ea. 5.00 ₹ 2,611.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
38 V,50Hz. having characteristic of quick action & Ea. 3.00 ₹ 3,010.00 ₹
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed(ii)
III metallic vitrified danger
notice board as per language suggested by
engineer incharge for MEDIUM VOLTAGE
installation to be erected as per IS-2551.
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking
capacity ICU of 50 KA and above at 415 V having
Normal current rating 200A. with variable Thermal
40 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹
50 c/s. With all internal connections, spreader
tinned copper & complete erected in existing
G.M.S. housing. ICS=100% of ICU only
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four
equal Nos. of electrolyte bus having current density
not more than 1.6 Amp. / sq.mm (Rated current /
cross section area) duly wrapped with colour
insulating tape for phase sequence of following
41 current carrying capacity, erected with necessary Rn.Mtr 1.00 ₹ 3,171.00 ₹
bus bar supports /insulators, main cable socket to
each bar, erected in existing cubical panel with
necessary connections.(B) Suitable for 200 Amp.
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
Providing 1:2:4 cement concrete foundation &
% PCC from bottom including excavation for the
pole of size 45 x 45 x 100 cm. Deep in below ground
43 level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 Ea. 5.00 ₹ 801.00 ₹
cm) high upper ground level with necessary curing
and finishing in approved manner.( for 4 & 6 mtr
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 KV.
to be laid on wall with necessary clamps or in
44 existing trench / pipe of following size of cables. (B) Rn.Mtr 150.00 ₹ 92.00 ₹
2 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
45 in existing trench / pipe of following size of cables Rn.Mtr 50.00 ₹ 207.00 ₹
(B) 2 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor
46 for 1.1 KV. to be laid on wall with necessary clamps Rn.Mtr 50.00 ₹ 106.00 ₹
or in existing trench / pipe of following size of
cables. (C) 3 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
47 in existing trench / pipe at road crossing or floor Rn.Mtr 50.00 ₹ 213.00 ₹
of following size of cable.
(A) 3 core 2.5Sq. Mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for
1.1 KV. to be laid on wall with necessary clamps or
48 in existing trench / pipe at road crossing or floor Rn.Mtr 50.00 ₹ 285.00 ₹
of following size of cable.
(B) 3 core 4 Sq. mm
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200- 250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty
cover.(approved make OEM has to submit test
certificate) & having back filling compound of (B)
49 Inner chemical (CCM Compound)- Resistivity:- 0.2 • Ea. 1.00 ₹ 10,489.00 ₹
/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar
content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retainmoisture for
long time Necessary test report must be
submitted.(c) For Electrical Installation covering
Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent (c) For
Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA) i.e independent Earthing in normal soil.
Providing and :erecting
filling Compound
150 cms.long and 2.5 cms. dia. galvanised iron pipe
with coupling and buch buried in specially prepared
earth pit complete with necessary 8 SWG earth
wire. - to be used for each Street Light
For using salt and charcoal / coke as required for
pipe type earthing.
Providing one bag of 25 Kg. Additional Back Filling
52 Compound (BFC) suitable for safe earthing device. Ea. 5.00 ₹ 700.00 ₹
Providing and erecting required size Copper strip
for earthing of H.T. OCB / ACB/ Transformer, LT
panel board, Motors etc. using copper clamp.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Volume-1 SBD.pdf
Volume-2 General Technical Specifications 1.pdf
Volume-2 General Technical Specifications 2.pdf
Volume-2 General Technical Specifications 3.pdf
Volume-2 General Technical Specifications 4.pdf
Volume-2A GENERAL SPECIFICATIONS BUILDING WORK.pdf
Volume-2B GR Building.pdf
Volume-3 General Technical Specifications for Road Works.pdf
Volume-4 Schedule-B.pdf
Volume-5 Drawing 1.pdf
Volume-5 Drawing 2.pdf
Volume-6 General Technical Specification.pdf
Volume-7 General Terms and Testing.pdf
Download all tender documents and submit your bid