344/GM(E)-I/NIQ-18/2026-27/50

Supplying fitting & fixing of 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II) and Providing fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded alloy aluminium sections and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification (Mode of payment is on finished surface area of ACP)4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating )and as per the direction of Engineer-in-charge

Suppying fitting and fixing of laminate glass coforming to IS: 2553-1992, with fabrication and installation of sructural glazing/curtain wall made from annodized extruded alloy aluminium section in all complete as per direction of Engineer in Charge.

Providing M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In first floor and covering leak due to puncture for fittngs of screws over roof sheet with silicon sealant in various points of approved make & brand as per direction of E.I.C.

Dismantling old damaged floor spring of glass doors & Supply fitting ,fixing , aligning heavy duty hydraulic floor springs with toppin assembly and all other necessary fittings at swapno bhor all complete as per direction of E.IC. NOTE : 1) RATE TO BE QUOTED INCLUSIVE OF 18% GST & LABOUR CESS @ 1%.