Work

Amount

Following works/procurement are to be carried out for Replacement of Jumpers from ACSR Panther to ACSR Moose and Twin ACSR Panther and other miscellaneous works and at 132 K.V. Sub Station Khurram Nagarwith ACSR Moose/Twin Panther Conductor including all cost of men, misc. consumables, T&P, Crane, Centrifuging Machine etc. to complete the job satisfactorily :

SUPPLY

P.G Clamp ACSR Moose to Panther conductor

P.G Clamp ACSR Moose to Moose conductor

Bus Post Clamp for ACSR Moose

Spacer for Twin Moose Conductor 02 Bolts, 100 mm spacing made of Aluminium alloy LM-6 complete with nuts,bolts & washers confirming to BIS:5561

Spacer for Twin Panther Conductor 02 Bolts, 100 mm spacing made of Aluminium alloy LM-6 complete with nuts,bolts & washers confirming to BIS:5561

132 KV P.T Clamp duly made of Aluminium Alloy (LM-6) Suitable for ACSR Panther Conductor complete with bolts, nuts & Washers as per sample Conferming to BIS:5561.

132 KV C.T Clamp duly made of Aluminium Alloy (LM-6) Suitable for ACSR Panther Conductor complete with bolts, nuts & Washers as per sample Conferming to BIS:5561.

132 KV Isolator Clamp duly made of Aluminium Alloy (LM-6) Suitable for Twin ACSR Panther Conductor complete with bolts, nuts & Washers as per sample .

132 KV Isolator Clamp duly made of Aluminium Alloy (LM-6) Suitable for ACSR Moose Conductor complete with bolts, nuts & Washers as per sample .

132 KV C.B Clamp duly made of Aluminium Alloy (LM-6) Suitable for Moose Conductor complete with bolts, nuts & Washers as per sample

Clamp on meter - Digital (Fluke or equivalent make) (0-300-600 A), AC and DC voltage to 600V and resistance to 40 kilohm with minimum 02 Year Warranty.

Mechanical Hydraulic Compressor Joint Machine Motorized, For HTLS as well as ACSR Conductors Jointing with HTLS conductor and ACSR die (ISO certified) with following specifications: Light weight 150 T manual Hydraulic compression machine with light weight durable operating handle, suitable for jointing for HTLS conductor with one set consumable spare. a) It will be supplied with 02 set of dies of HTLS conductor Casablanca/as per requirement (panther replacement) separately for condcutor and carbon core and 02 set each of ACSR Moose, ACSR Panther, ACSR Zebra separetly for Conductor and steel portions die suitable for HTLS, Total 16 dies. b) 150 Ton Capacity with display meter. c) Maximum Oil pressure: 700 bar d) Oil Tank Capacity: 7 to 10 liters e) High pressure delivery pipes with quick release coupling f) Reinforced with steel springs and synthetic rubber coating, g) Low pressure return pipe h) It should be easy to handle i) It shall be supplied with all required items like pressure gauge, accessories, tools, Hose Pipes and required 1-set spares like seal kit for pump, compressor head and coupler, hydraulic oil j) Weight of compressor head: less than 35 kgs.

ACCC HTLS Casablanca Conductor Jointing Hydrolic Machine, Capacity 100 Ton with minimum 03 Year Warranty (Top Pressed). ( Nike or equivalent make)

Four sheave pulley with following specifications: 4 Sheave pulley blocks (pair) shall be light in weight and easy to handle a) It shall be supported on heavy duty ball bearing, with a safe working load of 10MT. Factor of Safety shall be 2 times. b) The S hook with self-locking should be of swiveling type. The S hook should be provided with locking arrangement to prevent accidental slippage of S hook from the point of load. c) The groove size should be suitable to accommodate 12mm wire rope. The frame and all sheaves of the block should be made of high tensile Aluminum Alloy. d) Sheave outer dia: upper sheave 200 to 250mm, lower sheave 100 to 150mm e) Weight of both Blocks (Pair): 40Kg (Maximum)

Chain Pulley Block (5 MT) with following specifications : Chain Pulley Block shall be Portable, light weight and have following features/ functions/ accessories: a) Capacity- 5.0Ton b)Test load- 7.5Ton c) Standard Chain Lift- 3.0 Meter (Minimum) d) Dia of Chain- 10x30mm e) Chain grade-80 ISO f) 360 Rotating Hand Chain Guide to allow the operator to work from any angle for vertical as well as horizontal lifting.

Binocular Telescope Nikon or equivalent make with tech spec- objective lense dist-50, magnification maximum 8, multilayer coated lense 11.8 mm.

Tool Box with wrench set (Nike,Taparia or equivalent make) having items- Bl Hexagon ring Spanner 6x7-30x32 mm (12 Pcs.), Double Open End Spanner 6x7-30x32 mm (12Pcs.), Pipe Wrench (02Pcs.), Grip Locking Plier (01Pcs.), Circlip Plier Internal Straight (01Pcs.), Circlip Plier External Straight (01Pcs.), Side Cutting Plier (01Pcs.), Combination Plier (01Pcs.), Long Nose Plier (01Pcs.), Water Pump Plier (01Pcs.), Plastic Hammer (01Pcs.), Ball Pein Hammer (02Pcs.), Screw Driver Philips Pattern 100&150mm (02Pcs.), Flat Screw Drivers 250 & 300mm (02Pcs.), Two-in-One Screw Drivers (02Pcs.), Adjustable wrench (01Pcs.), 12.5 Square Drive Sockets 8-32mm (22 Sockets) (22 Pcs.), Reversible Ratchet (01Pcs.), Extension Bar (02Pcs.)

Safety Belt (Karam Full Body Harness PN 42, Udyogi UB102 or equivalent) with minimum 03 years warranty.

Hydraulic Conductor Cutter Machine use for all ACSR, ACCC Type Conductor (NIKE equivalent make) as per Technical Specification - (Size-3/8 inch,Weight-5 kg, Usage/Application-Industrial, Warranty-1 year, Crimping Stroke-700 bar, Cutting Capacity-up to 40 mm, Material-MS, Hydraulic Pressure Bar-700, Packaging Type- Tool Box)with minimum 02 years warranty.

HTLS conductor jointing tools & wheels including : a)Top Movable Aluminium Ladder of Length 5m for 04/08 hooks for horizontal use at Tension Towers with 150kg weight capacity. b) 10 socks for conductor. c) Two sheave pulley (04 nos) with following specs : Light weight Heavy Duty 2 sheave pulley block suitable for 20 mm diameter PP rope shall be mounted on ball bearings i) Safety factor shall be 2.0. ii)Self-locking forged hook shall be of swiveling type and attached to the snatch block. iii) Frame shall be made of high strength Aluminum alloy iv)Sheaves shall be made of nylon v)Weight: 7.0 Kg or less vi) Groove shall be suitable for 20 mm dia PP rope vii) External diameter: min 120 mm d)Automated Cum Along Clamp Suitable for HTLS conductor 08 nos e) 18 Nos. Rollers 600mm f)Steel Rope (12 mm and 16 mm of length 100m Each)

Work Part -(B)

Opening of old & existing Jumpers of various equipments with ACSR 'Panther' Conductor of line bays including jumpers from CT to CB to Line/Tandem/Bus Isolators and between Bus Isolator and 132KV Main Bus alongwith shifting of the old Conductor & Tension Fittings etc. from switchyard to sub Station Stores. (1 job per Line Bay for 02 bays at 132KV Khurram Nagar and 02 bays at 220KV Kursi Road)

Jumpering of various equipments with i) ACSR 'Moose' Conductor of line bays including jumpers from CT to CB to Line/Tandem/Bus Isolators and ii) Twin ACSR 'Panther' Conductor' between Bus Isolator and 132KV Main Bus by due cutting & Bending of Conductors and fixing &tightening etc. of the Conductors/Clamps /Connector/ Spacers. (1 job per Line Bay for 02 bays at 132KV Khurram Nagar and 02 bays at 220KV Kursi Road)

Providing and fixing of 150W LED Street Light Luminaries fittings of Phillips/Crompton/Havells Makein Single Piece Die Cast Alluminium alloy Housing with Pot Optic reflector & Toughened Clear Glass Cover with Frame for Lamp Compartment including cable terminations at 132KV S/S Khurram Nagar

Providing and fixing of G.I. SL Pole Bracket duly made of 40 mm dia 1.2 m long 'B' Class Pipe and Bent at one end by quarter circle in 1 M at an angle of 30 degrees for Fixing of 150W LED Street Light Luminaries Fittings on MS Round Pole withthe help of MS Clamps at 132KV S/S Khurram Nagar

Providing and fixing of G.I. Pipe duly made of 35mm dia 2.5m long 'B' Class Pipe and Bent at one end by quarter circle in 0.5 M through concrete plinth for Safe Entry of Cables in Junction Box duly installed on MS Round Pole at 132KV S/S Khurram Nagar

M/s S.S. Refregeration (BID ID -5535740)

SATKAR TRADERS (BID ID -5535396)