Loading
Loading…
Loading…
Tender Value
₹4.1 L
EMD Value
₹8,224
Closing Date
7 Sept 2026, 3:00 pm3d left
THE EE WRD I KUNJABAN AGARTALA
O/O THE EE WRD I, KUNJABAN, AGARTALA, TRIPURA
FDR / Urgent maintenance of different LI _ DTW scheme under Jirania Sub-Division during the year 2026-27 / SH_- Repair _ mtc. of pump-motor, suction-delivery _ electrical accessories etc. (Job No. TR/14/Minor Works/WRD-I/2026-27)
2026_CEWR_76408_1
25_EE_WRD_I_DNIET_2026_27
Open Tender
Civil Works
Percentage
90 days
WEST TRIPURA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹8,224
28 Aug 2026
28 Aug 2026
8 Sept 2026
28 Aug 2026
7 Sept 2026
31 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge.
i) For LI | 5 | No | 2,106.92 | ₹10,534.6 |
| 2 | Providing & fitting fixing Pump Shaft of approved quality. | 1 | No | 8,668.12 | ₹8,668.12 |
| 3 | Providing & fitting fixing Shaft sleeve bush of approved quality.
i) For LI
a) Cast iron | 4 | No | 872.43 | ₹3,489.72 |
| 4 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling.
i) 6206 Ball bearing (TATA /SKF) | 4 | No | 888.58 | ₹3,554.32 |
| 5 | Providing and fixing G.I. Bend of approved quality
a) 150 mm dia | 4 | No | 3,384.98 | ₹13,539.92 |
| 6 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPW specification and direction of the Engineer - in - charge.
External work.
i) 150 mm dia. nominal bore | 36 | Mtr | 1,931.5 | ₹69,534 |
| 7 | Providing & fitting fixing of GI flange (10 mm wall thickness ) by welding with GI/MS pipe and placing position as per specification and direction of the Engineer-in-charge.
i) 125 mm dia | 4 | No | 688.7 | ₹2,754.8 |
| 8 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.
i) 150 mm dia | 2 | No | 142.23 | ₹284.46 |
| 9 | Providing & fitting fixing C.I tail piece of approved quality at site of work.
i) 150 mm dia | 4 | No | 1,587.52 | ₹6,350.08 |
| 10 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality.
i) 150 mm dia | 45 | Mtr | 1,287.76 | ₹57,949.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.86 MB
DNIeT_25_EE_2026-27.pdf
Tender Documents • 3.01 MB
BOQ_77782.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].