Mechanical repairs to 03-cusec horizontal split casing pump, welding to rising main at Lift Irrigation Scheme at Unisoo old MISD Handwara.

Amount

Complete dismantling of single stage horizontal pump by way of disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump. Disassembling, dismantling and segregation of various pump parts such as shaft and sleeves, impeller, gland, fasteners, etc.

Complete assembling of single stage horizontal pump after cleaning of all parts throughly with petrol, coupling and alignment with motor, connecting of motor leads and testing on full load.

Mechanical transportation, loading, unloading and handling of pump using appropriate means of transport through a lead of approximately 35 kilometer.

Rebuilding of pump damaged SS shaft by way of welding works at excessively worn out places and rebuilding of bearing seats as per requirement and turning and finishing on lathe machine (04 spot) to restore original dimensions and profile of shaft.

Manufacturing, providing and fitting of collar type SS sleeve as per sample having finished weight of approximately 2.20kg .

Manufacturing, providing and fitting of GM cooling ring as per sample having finished weight of approximately 0.3kg.

Providing and fitting of Palmetto packing.

Providing and fitting of MS nuts and bolts of assorted sizes.

Manufacturing, providing and fitting of SS check nuts as per sample.

Repairs to the damaged SS shaft end by way of rebuilding using SS electrodes and then turning shaft on lathe machine to remove excess material deposited including threading/ collar building/ facing jobs as per requirement to restore desired profile and dimensions of shaft (03 spots).

providing and fitting of spare tyre for TC-16 tyre coupling with coupling bolts.

Repairs/periodic maintenance of 200 mm foot valve installed on suction line at LIS Unisoo by way of extraction of foot valve from their installed position by means of cutting damaged/ rusted/ worn-out bolts The job includes reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc. as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars. Re-fitting to suction line and testing on full load. The job includes to and fro carriage charges from site to workshop through a lead of approx. 50 km in mechanical transport.

Arresting of leakages to the 200 mm dia mild steel rising main at various spots (05 spots approx. weld length approx.= 500 cm ) by way of grinding, welding and plugging using 4mm thick MS strips with superior quality welding electrodes at site including minor manual earth excavation to facilitate welding at pipe bottom. The above job includes cost on account of charges for transportation, welding set, DG set, labour, head load charges, unforeseen items and all tools and tackles required for completion of job.

Carriage, loading, unloading, handling of various consumable items from Divisional store Baramulla to Various Lift Irrigation Scheme of MISD Handwara across a lead of approx. 120 kilometer in suitable mechanical transport .

Meer Engineers

M/S EURO LIGHT ENTERPRISES