REPAIR TO BOUNDARY WALL, FENCING, STORM DRAIN, PATH, HARDSTANDING AND CERTAIN MISC ITEMS AT SOUTH ZONE OTM ACCN UNDER GE (SOUTH) BINNAGURI

Amount

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

Dismantling RCC Post or struts of any section, including taking out embedded portion and making good disturbed ground posts embedded in natural ground complete all as specified and directed.

Dismantling RCC Post or struts of any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete foundation complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for including cutting reinforced as required complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete type A-I, 1: 1 1/2 :3 (20mm graded aggregate) in posts, fencing posts, straining or terminal posts, struts etc for fencing,average sectional area exc 100 sq cm and n.exc 250 sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed (Note :- Reinforcements and formwork shall be measured and paid separately)

S & F in repair of galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standared rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. including restaining and resecuring including making good staples of serviceable barbed wire with galvanised mild steel wire staples or steel pins etc as directed (each line of wire to be measured) complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Supply only chain link fencing made out of 3.15 mm dia galvanised iron wire of mesh 75 mm x 75 mm size, made upto into mattress or cages, complete all as specified and as directed. Note :- weight of chain link fencing to be assesed by a BOO ordered by the GE prior to execution.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire and fixing to angle iron fencing posts complete all as specified & directed.

S& F in repair of Mild steel work conforming to Fe-290 (Gde E-165) as in fillets for fencing post including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified & directed.

M&L for preparation of newly steel and iron surface of any description width or girth n.exc 10 cm and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for TMT bars 10 mm dia , cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders , cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm but n. exc. 22.5 cm long, Diameter of shank 5 to 10 mm complete all as specified and directed

M&L for Mild steel Plain bars 10mm dia , cut length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to for line wre/streatcher bar complete all as specified and directed.

Material and labour for preparation of new concrete surafces of fancing post and applying three coats of white wash complete all as specified .

M&L for providing RCC Nominal Mix Type A1 (1:1.5:3) using 20mm graded stone aggregate as in Beams,Cantilevers,Lintels etc and the like complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)

Use and waste of form work to soffits of floor or roof beam , beam haunching, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished surfaces complete all as specified and directed.

M&L for 50 mm thick (measured solid), precast cement concrete louvers and jallies with 1:2:4 mix, type B0 including all mouldings set in CM (1:4) complete all as specified and as directed.

Demolition of brick masonary work, built in cement mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. and deposited where directed complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

M&L for rendering 20 mm thick in two layer, first layer shall be of 10 mm thick CM 1:6 and second layer of finishing coat shall be 10 mm thick in CM 1:4 mixed with WPC @2% or as per manufacturer instruction by weight of cement on brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed. Note-WPC shall be measured and paid seperately.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M&L rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M & L applying two coats of colour wash over a coat of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparing of newly plastered wall surface and applying two coats of Cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plasterd wall surfaces any type by vigorously wire brushing brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coats of exterior emulsion paint white or tinted over a coat of primer as approved complete all as specified and directed.

S&F in repair Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for preparation of new surface of steel and iron of any discription, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint, white or tinted over a coat of primer complete all as specified and directed.

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in floor, finished rough to receive floor finishes complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 6mm top layer of anti abrasive material over 25mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 Type B-1 using 20mm graded stone aggregate in pavement/hard-standing compacted using screed vibrator surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type B-2 (using 40 mm graded stone aggregate) in sub base of flooring finished even and rough to receive the topping layer complete all as specified and directed.

M&L for cleaning /desilting of mud, rubbish etc. from drain bed up to 10 cm depth, including uprooting of vegetative growth throughly and wire brushing including flushing with water so as to achieve smooth flow of water in drain of bed width up to 60 cm and removing soil mud at low laying near by area complete all as specified and directed.

Dismantling of brick work ( Laid in Flat or Edges), or brick tiles in floors,channels or Kerbs built in cement mortar or cement lime mortar ,approns etc. beded and pointed in any layer(each layer) in any morter complete all as specified and directed.

M&L Brick work with Locally available best quality bricks , laid on edges on top surfaces of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.

All as per Item No.41 ___Ditto___ but except brick .(Serviceable bricks obtained from dismantling under Item No.40 shall be reused under this item).

M&L Brick work with Locally available best quality bricks , laid flat on verticle inclined sides of drains,bedded and jointed in CM (1:6) and Pointed in CM (1:3) complete all as specified and as directed.

All as per Item No.43 ___Ditto___ but except brick .(Serviceable bricks obtained from dismantling under Item No.40 shall be reused under this item).

M&L for plain cement concrete 1:3:6 Type C2 (using 40mm graded stone aggregate ) as in bed of drain or surface channels, saucer drain etc including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including form, moulds,mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm ---------------- Ditto -----------. (Only rate to be quoted)

M & L PCC 1:2:4 B0 (12.5 mm graded stone aggregate) as in coping or rounded or chamfered on edges complete all as specified and directed.

M&L for providing RCC 1:2:4 type B-1( using 20mm graded stone aggregate) as in precast cover slab and the like inclluding necessary formwork complete all as specified and directed.

M&L for TMT bars 8 mm dia , cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items and total amount under col No 53 will be adjusted accordingly.

Old unserviceable bricks obtain from demolition

Old u/s Iron scrap/MS/TMT bar of any type/size

Old u/s chain link fencing

Old u/s barbed wire

Old u/s bricks obtain from dismantling in drain

SG ENTERPRISE

Ms Singh Co

L. B. SHARMA