SITC of High Mast Light in unfenced and dark patches of border areas in AOR of various BOPs of SHQ BSF Krishnanagar under Frontier HQ BSF South Bengal in the State of West Bengal along Indo-Bangladesh Border (IBB)

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs long etc. with charcoal or coke and salt complete as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Add Cost Index @9% on total amount of DSR items Srl No. 1 to 4 i.e. Rs. 15,33,600/-

SITC of 16 Mtr high mast shaft in two sections suitable for 55 m/sec wind speed, with head frame , winch mounting bracket, luminaries carrige suitable to install 12 Nos Luminaries in symmetrical arrangement including, foundation bolts Aviation Light,Providing & fixing of raising lowering system comprising double drum winch, 5 mm diameter SS wire rope, trailing cable , connector , intrgral power tool motor, manual handle, junction box, lighting arrestor. (wiring material from JB to individual luminarie & MCB in base compartment are included and are the part of installation) inclusing founadtion as per approved drawing & direction of Engineer in charge.

Providing and fixing of 250 Watt LED Flood light energy saving, environment friendly, long life, exclusive innovative die cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural highmast and general purpose lighting with suitable clamp nuts and bolts at existing High mast light pole.

SITC of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic swictching of luminaries, power tool control with 2 nos 9A contactors and raise lower push button, incoming 35 sq mm and outgoing as per requirment.(Standard size 450mm x 350 mm for HML poles)

Providing and fixing of cable Joint box cum Bus bar chamber made out of 14 SWG CRCA sheet of size 500 mm x 500 mm x 300 mm deep having 200 Amp, 4 Nos insulated aluminium bus bars, front door openable & angle iron frame of size 500 mm x 300 mm with 600 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection etc. as required.

Supplying & laying of one number XLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 3.5X35 Sq. MM conf to IS: 7098 (Part-I), direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering.