GENERAL-SITC of 1.5HP Open well Submersible motor pump set , Rewinding of existing burnt motor pump set (keeping as standby) and repairs to the AC unit at VIP room at PWD Rest house Chankuvetty, Kottakkal, Malappuram-electrical works- General Electri

Amount

Repair works

OD273958/2022-2023:Supply,erection,testing and commissioning of 1.5 HP single phase open well submersible motor pump set Kirloskar / V Guard/equivalent make 132 to 180 LPM Discharge Rate against the head range of 18 to 32 mtr, 180-240 V with required accessories

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

OD274075/2022-2023:Supply and fixing 32mm/25mm Brass NRV including all labour charges

OD274076/2022-2023:Supply providing 14 mm/nearest size heavy duty PVC rope (Garwar make) for supporting the motor pump set.

OD274077/2022-2023:Supply,conveyance, installation testing and commissioning of 25mm Duroflex/Canoflex corrugated Green hose with new one and giving connection including all charge

OD274078/2022-2023:Supply and fixing 32/25 mm G I reducer all labour charges

OD274082/2022-2023:Supply & Providing necessary 25 mm Hose collar Hose Clip including threading in fixing with the pipes

OD273971/2022-2023:charges for lifting the 1/1.5HP submesible motor pump set from the well and convey the motor to the nearest workshop and lowering the motor to the well after completing the rewinding work

OD273972/2022-2023:Charges for rewinding the burnt motor - separate stater and rotor, dismantling the damaged starting and running winding from the stator slots, cleaning the slots neatly, insulating the slots with correct class of insulating paper, winding the starter and running coil with good quality correct gauge of super enamelled copper winding wires, closing the stator slots with fibre wedges, putting proper inter layer insulation, connecting the coil end connection, providing new rotor lead wire, steel binding the overhang with proper insulation at both ends, heating the coils and varnishing with good quality insulation varnish, keep it for drying, reassembling and test running(Less scrap copper)

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.27.3:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top

90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

OD274337/2022-2023:Supplying and fixing following rating, Double pole, Centre off MCB Change over in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

RAJESH R

Bidder Name

SHAHUL HAMEED V

RAJESH R