SPECIAL REPAIR TO OTM ACCN BLDG NO P-8/05 OF 2/2 CI DET CCIB AND SPL REP/REPLACEMENT OF BER PUMP, MOTOR AND ALLIED ITEMS AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

M&L Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring .

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to matchth or wall tiling incl dismantling complete all as specified and directed

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling complete all as specified and directed

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in skirting dado over and including 10 mm thick rendering in CM1:4 etc set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling complete all as specified and directed

M & L, glazed joint free coloured ceramic tiles in vertical surface as , 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match incl dismantling complete all as specified and directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including rilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling and plugging holes etc . in apron complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.

Ditto as per item no 12 but in cm 1:4 (external surfaces)with water proofing treatment compound.

M&L for 10 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.

M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M&L for applying two coat OBD on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. Make/ applicator : Royale Luxary emulsion shyne distemper of Asian paint, Nerolac beauty acrylic distemper, Berger bison acrylic distemper

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed .

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface of wall/ceiling to prepare the old /new surface even and smooth complete all as specified and directed..

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-12 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6., type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos hinges & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

S&F 30mm thick Flush shutter ,solid core construction ,with block board core and plywood face panel comercial type on boath sides complete all as specified and as directed .

S & F wiremash door pvc providing 30mm thick factory made wire mesh solid pvc door shutter consisting of frame made out of M.S. Tubes of 19 gauge thickness and size of 19mm X 19mm for stiles and 15mm X 15mm for top , lock and bottom rails. M.S. Frame shall have a coat of metal primer of approved make and manufacturer 19mm X 19m M.S. square tubes shall be covered with heat moulded plain sheet ' C' channel made from 5mm thick PVC sheet manufactureed by an ISO-9001-2008 certified company , of size 30mm thickness and 90 mm width out of which 75mm shall be flat and 15mm shall be bent in 90 degree angle on either side forming stiles, one of the 90 degree bend edge is cut from stiles as well as rails to nails from inner side of door to hide wire mesh fixing steel screws. 5mm thick 115m wide PVC sheet out of which 100 mm shall be flat and 15 mm shall be bent in 90 degree on the inner side to form top and bottom rail and 130 mm wide pvc sheet out of which 100 mm shall be flat and 15mm shall be bent in 90 degree on both side to form lock rail . An additional 5mm thick pvc strip of 20 mm width is to be stuck on the interior side of the 'C' channel using pvc solvent cement adhesive. incl panel will be of SS wire mesh of 24 gauge and 1.4 mm aperture to be fitted inside area of stiles and rails. The wire mesh in top , bottom fixed and incl in door and lock rail is sealed with 15mm X 15mm tube with steel screw of size 13/6 mm. 10mm thick (5mmX2nos) thick pvc strip of 25 mm width is to be stuck & nails on Both side of G.I. wire mesh interior at the top , bottom &lock rail. 10 mm thick (5mmX2nos), 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3nos. M.s powder coated butt hinges size 100 mm X 25mm X 2mm and 32 mm long steel screws drilled suitable to pass throug both the walls of the M.S. tube other hardwares should be fixed with 19X6mm size steel screws etc. complete all as specified and directed.

S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt complete all as specified and directed.

S&F extruded Aluminium alloy handle fabricated annodised 150 mm size, complete all as specified and as directed .

S&F 300 mm long aluminium alloy annodised slidding door bolt with hasp and satple (bolt type) and fixing clips of sheet castor extruded sections and fixing bolts and slidding bolts of extruded section or cast aluminium alloy and fixed all as spd and directed

S&F MS 300 mm brass ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick decorative lamination both sides (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / WPC Frames/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings. Make for materials : Rajshree Doors or equivalent as approved by GE. Note:-(i) Frames shall be fabricated by authorized dealer of M/S Rajshree Indore using PVC sheet manufactured by M/S Rajshree Indore. (ii) Provision of tie rod in shape of internal MS tube or round bar etc of any size adequate to keep the chowkhat in true position shall be provided before covering the frame with PVC sheet at workshop. For the purpose of measurement & payment length of chowkhat without tie rod shall be measured.

S&F in repair aluminium, anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.

S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F 100 mm thick butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed

S&F casement windows with net & grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60x60x2.5mm suitable reinforced and double multi-shutters division are made by using shash mullion having 50x64x2.5mm multi-cavity UPVC section, suitable reinforced with Gl and shutters are made out of 50x85x2.5mm upvc section, reinforced and welded in corners with EDPM gaskets provision & incl glass and for air tight at frames and outer side of shutter with single glaze window shutters and adjusing suitable galss bead with perfect hardware like hinges, handles, stays etc complete. Incl Mosquito mesh shutter is made out of UPVC extruded section of 61x27x2mm with GI channel of 1.2mm thick, welded in corners Mosquito net of fiber is fitted in shutter with proper required accessories lick, hingis. MS grill of 12mm round pipe are inserted in main frame & screwed by hiddenscrewing system with powder coating etc complete all as specified and directed by Engr-in-charge.

M&L for RCC 1:2:4 type B-0 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick AC boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-410, Gde E-250 all as specified and directed.

M & L, cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M&L for PCC 1:4:8 type C2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified.

M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs Stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs concealed Stop cock chromium plated cast copper alloy fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed.

S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete.

Supply & Fix 500 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required and connections complete complete all as specified and directed

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required and connections complete complete all as specified and directed

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repair Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed.

S&F in repair, Brass CP wash basin mixer(long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.

S&F in repair, Brass CP wall mixer (long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.

S & F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F in repair 5mm thick glass shelf/mirror self of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed

S&F in repair 6mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed

S & F Aluminium peg sets of 6 pegs complete.

S & F in repair Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed.

S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repair brass chromium plated toilet paper holder fixed with brass screws complete all as specified.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S&F in repair 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed

S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

S & F in repair PVC (SWR) junction single,(Single T) equal or unequal 75 mm dia

S &F in repair PVC (SWR) 75 mm dia vent cowl

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

M&L Granite (of any type of coloured) work (table rubbed and polished) 20 mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S&F in repairs PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.

S&F in repairs 32mm bore bottle trap of of PTMT having minium water seal of 25mm ( minimum weight 32mm-260gms) complete all as specified and directed.

S&F in repairs C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed.

S&F in repairs Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repair 15mm angle valve cast copper alloy screwed down high pressure fancy type chromium plated complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection finisheed even and smooth without using extra cement complete.

M&L for precast cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in manhole covers , shelves, chajjas etc and similar articles with plain faces set in CM 1:4 incl demolition complete all as specified.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 incl demolition complete all as specified and directed .

M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in hard soil complete all as specified and directed.

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Demolition and breaking up drain pipes (Salt glazed ware ,AC or reinforced concrete ) det in cement mortar internal dia of pipe in 150mm to 200mm dia

M&L for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed .

M&L for concrete bed to 200mm drain pipes including forming cradles in PCC 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed .

Supply only water proofing compound ,complete all as specified and as directed

S&F in repairs curtain rod made of SS pipe dia of rod 25 mm with decorative brackets and ends complete all as specified and as directed.

M&L, 18 to 20 mm thick Makrana white Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges complete all as specified and as directed.

S&F in repair 20mm to 25mm thick Hard wood 2nd class weather boarding clean sawn and rebated on thick edge to give 25 mm laps and wrought both side and edges shot and chamfered fixed to roof hight of bldgs complete all as specified and directed .

S&F in repair stainless steel pipe 32 mm dia of grade 202 medium as in framed work such as sign boards/ railling etc including all necessary welding drilling or rivetings brackets stoopers complete all as spd and directed

S&F in repair stainless steel pipe 50 mm dia of grade202 medium as in framed work such as sign boards/railling etc including all necessary welding drilling or rivetting brackest stoppers and including embediing the same in PCC 1:3:6 type c1 below ground level size of PCC (450 x 450 x 600 mm) including excavation in soft/disintegrated rock complete all as spd and directed

Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, medium grade ISI marked complete with required size of modular sunken box and Modular cover plate for mounting Modular switch, socket and regulator & all PVC conduit accessories / fittings and including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

Ditto as per Item No 109 but, (c) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp with 2.5sqmm single core (FRLS)PVC insulated unsheathed multistranded copper conductor cable and incl continuous earth wire green in colour 2.5sqmm single core (FRLS)PVC insulated unsheathed multistranded copper conductor cable

Ditto as per Item No 109 but, (d) One 3/5 pin 5/6 amps socket outlet point on independent board controlled by one , one way switch of 5/6 Amps on independent board with 2.5sqmm single core (FRLS)PVC insulated unsheathed multistranded copper conductor cable and incl continuous earth wire green in colour 2.5sqmm single core (FRLS)PVC insulated unsheathed multistranded copper conductor cable

Ditto as per Item No 109 but, (f) With 4.0 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S&F Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.

S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S & F Electronic fan regulator modular stepped type two module with five steps 240 Volts, 100 Watt suitable for 1200/1400 mm sweep AC ceiling fan complete all as directed by Engr-in-Charge.

S&f white cover plate with frame modular type of 02 module complete all as specified and directed.

S&f white cover plate with frame modular type of 03 module complete all as specified and directed.

S&f white cover plate with frame modular type of 04 module complete all as specified and directed.

S&f white cover plate with frame modular type of 06 module complete all as specified and directed.

S&f white cover plate with frame modular type of 08 module complete all as specified and directed.

S&f metal flush box modular type of 02 module complete all as specified and directed.

S&f metal flush box modular type of 03 module complete all as specified and directed.

S&f metal flush box modular type of 04 module complete all as specified and directed.

S&f metal flush box modular type of 06 module complete all as specified and directed.

S&f metal flush box modular type of 08 module complete all as specified and directed.

Taking down ceiling fan 1200 mm sweep/Exhaut fan of any size complete cleaning the grease oil etc spray painting with 2 coats of synthetic emamelled paint over a coat of primer including replacement of bearing, capacitor, cotton pin, rubber coal, MS nuts bolts washer, connector prewired from connector from connector to ceiling rose with twin core flexible copper conductor cable 24/0.02 refixing in position connecting testing etc complete all as specified and directed.

Supply and Fixing in repair LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.

S&F recess mounting luminaire with high performance LED’s ,CRCA powder coated white after phosphochromate treatment ,high efficiency long life LED package in integral module with lumen efficacy of >120lumens per Watt ,high transmittance opal diffuser ,powered by an independent output electronic LED driver (SMPS based constant current supply)with output short circuit protection ,surge protection upto 4KV & other reliability test as per IS 15885 Part 2/Sec13, system power 36Watt, voltage 240V,50Hz AC,CRI>80,Colour Temp. 6500K,System Lumens 3600 lm,size of fixture 600mm x 600mm , Pf 0.90,driver efficiency >85%,suitable for POP/Gypsum/Armstrong/Grid false ceiling complete with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting incld taking down old fitting all as specified and directed

S&F inverter LED lamp, 6500K, 900lm in white colour of 12 Watt, base cap B-22 with polycarbonate diffuser and aluminium heat sink complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x20 Watt,four feet long) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x10 Watt,two feet long) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

S & F 1x60 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S&F Sub main wiring with two single run (with proper colour code as per IE rule) of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia medium grade ISI marked with and including necessary conduit accessories, concealed type including 6 Sqmm multi stranded copper conductor PVC insulated cable as earth wire(Green in colour) connected to common earth dolly, including taking down old U/S submain wiring complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

.S&F Socket residual current device with socket plug top and MCB with a three pin earth plug and socket complete with on DP MCB 25 Amp complete all as specified and directed.

S&F factory made epoxy powder coated Distribution board vertical TPN 4 ways (TPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one FP-MCB 63 Amp as incomer and SP/TP MCBs outgoing complete all as specified and confirming to IS : 8623.

Supply and fixing factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA C Curve complete all as specified and directed.

Supply and Fix MCB DP 240 volts, 40 amps, C Curve of 10 KA complete all as specified and directed.

S&F MCB Triple pole & Neutral 415 volts, 63 amps, C Curve of 10 KA complete all as specified and directed.

Supply install and tesing water heater storage type (Geyser) single phase 230 V, 50 Hz, 5 star energy saving high density PUF insulation tank made of heavy duty mangesium anode rod with steel core to protect enamelled tank from rust & corrosion, vertical installation type 25 Ltr Cap 2000 Watt rated power, incoloy 800 glass coated heating element, inner tank coating of feroglas powder, tank made of ultra thick super cold rolled steel plates, rated pressure 0.8 MPa, IPX4 protection consist of safety valves, thermal cut off, thermostat including connecting up and fixing arrangement on wall including providing hole fastners-04 Nos hot and cold water metallic flexible pipes 15 mm bore of adequate length as provided by OEM or required at site - 02 Nos non return valve 01 No and including necessary plumbing work, complete with intergated shock safe plug with all protection features as per OEM design and standard all as specified and directed.

S & F Exhaust Fan PVC body, 200mm(8") sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including making holes in wall,plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and as directed.

Dismantling of old unsv pump set of various capacity and deposited to E/M yard complete all as specified and directed.

Disconnecting and taking up or down UNSV sluice valve and NRV 100mm size complete all as specified and directed.

Supply installation, commissioning and testing of centrifugal pump with motor cpapcity 25HP/18.5 Kw, 2900 RPM at 110m head, discharge of 480 LPM with Bronze-casing Bronze impeller 40 C8 pump shaft with mechanical seal mounted on a common base plate and coupled directly through CI coupling with suitable capacity of 3 phase electric motor for operation on 2900 RPM, 415 volts 50Hz class B insulation with all accessories complete all as specified and directed with following: (a) Pressure gauge with brass cock-01 Nos (b) Standard foundation as per manufacture's specification. (c) AIr release pipe and primming pipe with gate valve 20mm.

Supply and fixing of PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core of 6 sqmm size from Lt panel to starter and starter to motor including crimping of copper lugs-06 Nos, complete all as directed.

Supply and fixing of CI sluice valve both end flanged class PN-1.6 of size 100mm heavy duty ISI marked conforming to IS 14846 (latest revision ) with cast iron wheel with brass spindles with rubber gasket nuts, bolts etc complete all as specified and directed.

S&F of cast iron non return valve swing type 100 PSI or PN 1.6, ISI marked, on rising main, both end flanged complete with jointing materials such as rubber gasket, nut & bolts with suitable washer complete of 150mm dia of pipes including alteration work in pipe line complete all as specified and directed.

M/S G. S. MATIYANI AND SONS (BID ID -3474238)

M/s Rana Enterprises (BID ID -3479257)