E TENDER FOR CONSTRUCTION OF SUMP, PARKING SHED AND MISCELLANEOUS WORK AT UNJHA S/DN UNDER PALANPUR CIRCLE OFFICE,UGVCL.

NAME OF WORK : Construction of Sump, Parking Shed and Miscellaneous work at Unjha S/dn under Palanpur Cirle office

Sr. Description Qty. Unit Rate Amount

Excavation for foundation upto 1.5 M. depth including sorting out and

1 stacking of useful materials & disposing of the excavated stuff upto 50M. 40.00 CMT. 121.72

Lead. - Loose OR Soft soil

Excavation for foundation up to 1.5 M Depth including sorting out and

2 stacking of useful materials and disposing of the excavated stuff up to 50 50.00 CMT. 155.52

meter lead (B)Dense or Hard soil

Excavation for foundation for depth from 1.5m to 3.0m Including

3 sorthing out and stacking of useful materials and disposing of the 12.5 CMT. 168.71

excavated stuff up to 50 meter lead (B)Dense or Hard soil

Providing & laying Cement concrete 1:4:8 ( 1 cement :4Coarse sand :

4 machine crush metal aggregate 40mm.nominal size ) and curing 39.50 CMT. 2617.18

complete excluding cost of form work in (A) Foundation & Plinth

Demolition including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift 1. R.C.C. work

Demolition of brick work and stone masonry including stacking of

6 serviceable materials and disposal of unserviceable materials with all 10.00 CMT 557.27

Filling available excavated earth ( excluding Rock ) in trenches, plinth,

7 sides of foundations etc. in layers not exceeding 20 cm. in depth 70.50 CMT. 135.56

consolidating each deposited layer by ramming & watering.

Filling in foundation & plinth with murrum or selected soil in layers of

8 20cm. Thickness including watering, ramming and consolidating etc. 10.00 CMT. 267.08

Filling in plinth with sand under floors including watering, ramming,

consolidating and dressing etc. complete.

Dismentling steel work including distempering and stacking the materials

with all lead and lift.

Providing and fixing pre-cast Rubber Dye/steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

11 vibrated mechanically and as per approved design Confirming to IS 260.00 SMT 692.91

15658 : 2006 including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint :-

12 (A) In beams and joints channels angles, tees, flats with connecting cleats 3650.00 KG 90.18

as in main and cross beams, hip and jack rafters, purlins connected to

common rafters and the like.

P/F corrugated colour coated GI sheet roofing of Jindal or Equivalent

make having width of 1050mm ( effective 1000mm) and fixed with

colour coated galvenized iron 'J' or 'L' hooks, bolts & nuts 8mm diameter

, with bitumen and G. I. Limpet washers filled with white lead complete

excluding the cost of Purlins , Rafters and trusses .(0.60 mm. Thick

Providing. Laying and jointing in true line & level 25 mm dia. U.P.V.C.

pipe (Sch 40) for cold water in ground OR on wall including fittings of

make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

14 EIC. pipe shall be fixed on the wall with the help of clamp at every two 80.00 RMT 90.93

meter C/C or shall be concelled as directed including necessary fittings

etc and fixing the same with adhesive solvent including testing of pipe &

joints including cost of all materials etc complete.

Sr. Description Qty. Unit Rate Amount

Providing. Laying and jointing in true line & level 15 mm dia. U.P.V.C.

pipe (Sch 40) for cold water in ground OR on wall including fittings of

make PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

EIC. pipe shall be fixed on the wall with the help of clamp at every two

meter C/C or shall be concelled as directed including necessary fittings

etc and fixing the same with adhesive solvent including testing of pipe &

joints including cost of all materials etc complete.

Providing, Erecting & Fixing ready made double coated sintex P.V.C. (ISI)

or equivalent ISI water storage tank of required capacity each with cover

including providing & fixing one 20mm.dia. float valve ball‑cock , one

16 20mm dia. G.I. Waste pipe with plug, one 25mm dia. G.I. over flow pipe 2000.00 Litres 3.91

of length up to 0.30mt. including making all connection for inlet/outlet

supply with necessary fittings etc. complete on terrace. (A) 1000 Liter

Painting two coats (including priming coat) on new steel and other metal

17 surfaces with enamel paint, brushing interior to give an even shade 130.00 SMT 127.76

including cleaning the surface of all dirt, dust and othr foreign matter.

Brick work using common burnt clay building bricks having crushing

18 strength not less than 35 Kg./ sq.cm. in foundation & plinth in cement 22.00 CMT. 3390.61

mortar 1:6 ( 1 cement : 6 Fine sand ) (B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg./ sq.cm. in super structure above plinth

level (upto floor two level) in cement mortar 1:6 ( 1 cement : 6 Fine sand

) (B) Conventional

Providing TMT bar FE 500/500D reinforcement for RCC work including

bedding binding and placing in position complete upto floor two level.

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Wall painting two coats with weather proof acralic emulsion APEX type

paint of approved brand & manufacture and of required shade on

exterior wall surface to give an even shade over and including a primery

coat with alkaly resistance primer of approved brand after throughly

brushing surface to remove all dirt and remains of loose powdered

materials etc comp. for all height.(R.A)

Providing & laying colour glazed tiles 6mm. Thick in flooring, treads of

23 steps & landing laid on a bed of 12mm. Thick cement mortar (1:3) (1 8 SMT. 941.12

cement : 3 coarse sand finished with flush pointing in white cement.

Providing & laying coloured glazed tiles 6mm thick in skirting, risers of

24 steps & dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse 20 SMT. 972.31

sand) and jointed with white cement slurry

Providing & Laying cement concrete M-200 and finishing smooth with

curing etc. complete including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in (II) slab having more than 13cm

& up to 15cm. thickness. Upto floor two level

Providing and fixing C.I. Manhole cover 0.60 mm x 0.45 size having

weight not less than 35 kg.

Providing & applying Dr.fixit( pidilite)LW+ OR equivalent, In RCC Work

using 200ml per bag as directed & instructed by E.I.C

Sr. Description Qty. Unit Rate Amount

Providing & Laying C.C. (1:1.5:3) / M-20 or for plain or R.C.C. work for

Road pavement, using 12mm. To 20mm. Size black trap machine crushed

metal including necessary centering for all sides as required , mixing the

concrete in mixer machine, ramming with Vibrator, including keeping

28 the joints between road panels & finishing the Honeycombed surface if 1 CMT 4654.88

any, immediate finishing of Top layer of road with Trowel & spunch to

create anti skid hard surface with curing etc.. complete as per drawing &

specification, & as directed by E.I.C. with supply of cement by the

contractor. ( REINFORCEMENT IF ANY WILL BE PAID SEPERATELY.)

Providing & fixing submersible pump having 1.00 HP motor of ISI brand

29 of CRI/Lubi or equivalent with all G.I. fittings for inlet & outlet connection 1.00 No. 8000

with electrical pannal, require cable etc complete as directed.

Providing fitting & fixing fully glazed/ partly glazed double leaf anodised

aluminium entrance door using extruded section fabricated by standard

manufactures with framing 10.15cm x4.45cm rectangular section with

minimum Thickness 1.95mm & door shutter made from 10.15 cm x

4.45cm aluminium top / bottom section,Lock rail mimimum

15.0cmx4.45cm & vertical section 4.70 x 4.45 cm size with minimum

30 Thickness 1.95mm using 5.0mm thick "Triveni"or HB4 smoke glass with 3.00 SMT 6965.00

glazing deep rubber gasket with locking arrangement(Godrej type) with

all fixtures & fastenings of anodised section with aluminium bedding

floor spring mounted door closer with all labours & materials etc.

Complete as per drawing and as directed by E.I.C..Item also includes

powder coating to alluminium sections of approved colour / shade incl.

all materials,labour,tools & tackles etc. complete.

Providing and fixing window having extruded alluminum colour anodized

section frame main outer size 63.5 x 38.10 x 1.95mm (of Jindal Section

no4605,@ wt 1.094 Kg/Rmt), horizantal two track member size

61.85mm x 31.75 mm x 1.20mm (of Jindal section no 8687 @ wt of

0.695kg/Rmt), vertical memberof size 61.85mm x 31.75mm x 1.30mm

(of jindal section no 8758 @ wt of 0.659kg/mt) with sliding shutter of

31 horizantal member size 40mm x 18mm x 1.29mm (of jindal section no 10.00 SMT 1696.73

8949 @ wt of 0.456kg/Rmt), vertical member of size 40mm x 18mm x

1.29mm (of jindal section of 8947 @ wt of 0.456kg/mt, section 8948 @

wt of 0.457kg/mt) with 5mm thick transparent bronze colour tinted

float glass with powder coated alluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete (For two track window).

Providing 20mm. Thick double coat mala cement plaster on interior brick

/ concrate work for plastering comprising of base coat of 12mm thick

cement plaster in (i) Cement mortar 1:4 ( 1 cement :4 coarse sand)in

rough finishing and 8mm thick top coat of cement mortar 1:2 (1 cement

:2 coarse sand) finished with trovel incl. scafolding, curing etc complete.

up to floo two level.

Providing and laying 24" x24" Vetrified 8 mm thick tiles in flooring,

skirting etc. laid on a Bed of 20 mm. Thick cement mortar 1:6 (1 cement :

33 6 coarse sand) and jointed with colour & white cement slurry including 45.00 SMT 1422.53

finished with flush pointing and cleaning the surface etc complete.

(Double Charge & Light shade)

Providing and laying Red granite for entrance steps,water counter etc.

flooring over 20 mm. (average) base of cement mortar 1:6 (1 cement :

coarse sand) or L.M. 1:1.5 and jointed with grey cement slurry including

rubbing and polishing complete.

Labour charges for making moulding edge to Black granite incl. all

tools,tackles etc. complete as directed.

Sr. Description Qty. Unit Rate Amount

Providing and fixing to wall ceiling and floor 10.0 kg. F/cm2 working

pressure polythylene pipes of the following outside dia. special density,

36 complete with special flange compression type fittings, wall clips etc. 15.00 RMT 335.69

including making good the wall ceiling and floor. (For rain water pipe)

A) 110mm. dia. O.D., P.V.C. Pipe.

Providing & Fixing M.S. Fan clamps type 1 of 16mm. Dia. M.S. bar bent to

37 shape with hooked ends to R.C.C. slabs during laying including painting 2.00 Nos 130.94

the exposed portions of loops, all as per standard design complete.

Applying two coats of Birla Or Asian acrylic lapi (putty) & two coats of

primer approved brand and manufacture on new wall surface to give an

even shade including throughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth

Distempering (two coats) with emulsion paint (tractor emulsion type) of

approved brand & manufacturer & of required shade on wall surfaces to

give an even shade, over & including a priming coat with appropeate

primer of approved brand & manufacture after throughly brushing the

surface free from mortar droping & other foreign matter & also including

preparing the surface even & sand papered smooth.

Providing and applying anti termite treatment, as per IS 6313 (part II &

part III 2001) for building works in pre construction & post construction

stages, using chemicals conforming to relevant IS in water emulsion and

40 effective when aopplied uniformly over the area to treated. The 45.00 SMT 85.96

chemical to be used is chloro-pyriphos 20% EC or its equivalent. The

treatment is to be carried out as per the procedure mentioned below

and treated plinth surface area is to be taken for measurement.

Providing & fixing china mosaic tiles flooring as water proofing

treatment including (a ) Applying cement slurry of cement admixed with

water proofing compound after cleaning the surface properly. (b) Cracks

in slab shall be open in ' V ' groove & all loose materials shall be removed

& crack filling shall be done with special & approved type of expanding

crack fillet material . ( c ) Depressions in slab if any be filled up with

C.C.(1:2:4 ) I.P.S.flooring. ( d ) P / L 20 mm thick plaster layer in C.M. ( 1:4

) with cement admixed with water proofing compound including

rounding of junction of walls and slab by making cement vata. ( e )

Finishing the surface with china mosaic tiles (pieces ) flooring incl.fixing

the same in cement mortar (1:2) setting with ready made tile adhesive

as recommended by manufacturer’s including fillings of joints mixed with

pigmented white cement slurry of matching shade & finally finishing the

surface with trowel with white cement slurry etc., complete ( f ) After

finishing, the whole terrace shall be flooded with water to check the

performence of work.

Approved make Power Saving 50 Watt Ceiling Fan with Condenser

Volt A.C. 50 Cys. 1200 mm sweep complete having 3 blades with

aluminium blades with, canopy & 30 core flexible wire with earthing.

(Havells, Orient, Crompton, Anchor, Bajaj)

Providing formwork of ordinary timber planking so as to give a rough

finish including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth

Sr. Description Qty. Unit Rate Amount

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

4- graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement.

Point wiring for light with 2-1.0 sqmm & earthwire of 1.0 sqmm (green)

both are of ISI marke approved make PVC insulated multistrand copper

wires, in existing pipe duly erected complete with 6A Modular type

switch/bell push & accessories of approved make and earth continuty of

following type, erected on PVC/Metallic box covered with appropriate

front plate modules erected concealed in wall/ceiling. (Loop point

include) (B) Single mounting base-frame & Textured/Metallic front

plates. Cat. II

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator

46 with separately mounted and accessories with earth continuity of 2.00 Nos 632.00

following type erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and

accessories Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name 120 to

300 V, Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K,

Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver

efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting

required LM-79 & LM-80 Certificates)(D) LED Panel Light with provision

for Plane front frame with translucent cover fixed to housing

complete.IP20(iii) 12-15 watts, 6" x 6", Surge-2 KV ii) Cat-III

Providing & fixing approved and tested quality bib cock with all fittings

48 complete as per specifications and product detail as under: Cera Cat No 2.00 Nos 1303.00

Providing and casting in situ ordinary cement concrete M-150 for coping,

over riding returns including formwork curing and finishing complete.

50 Labour charge for Removing & Refixing of Removed Existing Paver Block 15.00 SMT 135.00

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round,

square or round bars with round headed bolts and nuts or by screws (A)

Sr. Description Qty. Unit Rate Amount

Providing & fixing of box rimless pattern wall mounted cantilever type

white/coloured vitreous china European water closet including flushing

cistern with C.P bolts, nuts, CI chair (painted with two coats of enamel

paint over a coat of primer) or other hanging arrangements, bakelite /

poly propylene soft closing seat cover with C.P. hinges & rubber buffers,

connector pipe from P/S trap to drainage pipe, brided hose pipe

complete with all accessories. Including cutting & making good the walls

& floors wherever required. The scope include the items as per

specifications and product details as under: EWC-P:- WALL MOUNTED

CERA CAT NO: S1043168 P.25 (CHANTER with slim soft close seat cover)+

Cistern Half Frame Cat No. B1130102 (CHEVRON) P. 32 + Knob Cat No

Providing & Fixing Toilet hand spray with completed set with pipe and

handle & rest socket. Fitted as per instruction of EIC

Providing & Fixing chromium plated brass half turn flush cock of

approved quality including fixing in pipeline etc.. Complete 25MM. Dia.

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

55 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 15.00 SMT 564.77

sand ) in superstructure above floor two

level (B) Conventional

Providing & fixing steel cupboard shutter of 18 gauge with steel frame

56 and fixing the frame with brick masonry including locking arrangement 5 SMT 3114.00

with 3 coats of approved oil paint etc., complete.

A ESTIMATED COST - RS = ₹

B Bidder’s Offer (+ / -) in % ------------- [B]

C Grand Total C = A +/- (A*B)]

C Grand Total C = A +/- (A*B)]

D Add 1% Welfare cess on C

E Total including Welfare Cess ----- D = C + D -------------------------------

F Goods & Service Tax F = E x GST% i.e. 18%as applicable on the date of tender in amount Rs.

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

G Grand Total including Welfare Cess & GST ---- G = E + F ----------

Final Offer (in Rs.)

Final Offer (Rs. In Words)

We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put up by UGVCL on WEB

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We

am/are willing to carry out the work at quated rate as above.

SIGNATURE OF CONTRACTOR Superintending Engineer

(With rubber stamp/seal of the company) UGVCL C.O. PALANPUR