Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹17.9 L+₹11,482.23 (0.65%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹18.1 L+₹32,899.23 (1.85%)Rejected-Finance 17 KARAMCHARY COLONY UIT ROAD SRI GANGANAGAR RAJASTHAN 335001 | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹18.8 L+₹1.1 L (6.03%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹19.5 L+₹1.8 L (9.87%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
17 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
WELCOME MAINTENANCE AND PETTY REPAIRS TO CERTAIN BUILDINGS IN DOMESTIC AREA AND ZONE-I AT TBRL RANGE RAMGARH
2023_MES_633407_1
GE I R AND D/CHD-84/2023-24
Open Tender
Civil Works
Item Rate
270 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹46,000
Yes
11 Mar 2024
19 Dec 2023
19 Jan 2024
19 Dec 2023
17 Jan 2024
3 Jan 2024
Amount
Material and labour for preparation of old treated plastered /unplastered surface of ceiling by brooming down and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old treated plastered surfaces of walls by brooming down and applying one coat of oil bound distermper complete all as specified and directed.
Material and labour for preparation of old treated plastered surfaces of wall and applying two coat, of oil bound distermper complete all as specified and directed.
Material and labour for preparation by complete removal of existing treatment of walls and applying two of oil bound distember over one coat of primer with 1mm thick putty complete all as specified and directed.
Material and labour for preparation of old treated plastered unplastered surfaces of walls by brooming down and applying one coat of cement based paint complete all as specified and directed.
Material and labour for preparation of old treated plastered unplastered surfaces of walls by washing ,rubbing, down and stoping, brooming down and applying two coats of cement based paint complete all as specified and directed.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old steel surfaces of any description over 10cm girth or width or otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for writing letter or figures (block, Roman, Italic or Indian) n exc 30 cm high with black synthetic enamel paint complete all as specified and directed.
Material and labour for writing stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.
Taking down shutters exe 1 Sqm n exc 2 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.
All as per serial item no 13.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each -ditto-
Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening complete all as specified and directed.
Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and directed.
Supply and fixing for 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.
Supply and fixing for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.
Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.
Hacking out old broken glass(any thickness,size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with walls complete all as specified and directed.
Supply and fixing for 4mm thick sheet glass ordinary quality with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and directed.
Supply and fixing for 4 mm thick figured sheet glass ordinary quality with oil putty in square n exc. 0.5sq m in each pane complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Supply and fixing for 19mm thick prelaminated particle boards (both side laminated) of interior grade type II grade I of approved shade complete fitted in cup board shutters complete all as specified and directed.
Supply and fixing for 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc complete all as specified and directed.
Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 Sqcm clean sawn, secured with nails or brads complete all as specified and directed.
Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fixing for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed.
Supply and fixing for Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed.
Supply and fixing for Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 100mm complete all as specified and directed.
Supply and fixing for aluminium handles extruded aluminium alloy handles, fabricated type, anodised, size of handle in 150mm complete all as specified and directed.
Supply and fixing for aluminium handles extruded aluminium alloy handles, fabricated type, anodised, size of handle in 100mm complete all as specified and directed.
Supply and fixing for mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.
Supply and fixing for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of size 140mm complete all as specified and directed.
Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs complete all as specified and directed.
Supply and fixing in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 complete all as specified and directed..
Supply and fixing in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.
Material and labour for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement complete all as specified and directed.
Demolition of brick work or stone /boulder masonary built in cement mortar including all quions , arches, pillar etc complete all as specified and directed.
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serial item no 45.00 above but except brick complete all as specified and directed.
Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Material and labour for rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed.
Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and directed.
Material and labour for external plastering 15mm thick on fair faces of concrete surfaces in CM (1:4) using WPC @ 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement paint complete all as specified and directed.
Material and labour for rendering 5mm thick cement plaster 1:4 on fair faces of concrete surfaces in ceiling complete all as specified and directed.
Material and labour for three coats of white wash of plastered /unplastered surface of ceiling complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
Material and labour for glazed ceramic tiles (coloured) 300x200x7mm thick and 350x250x7mm/450x350x7mm on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over and including 10mm thick rendering CM 1:4 complete all as specified and directed.
Material and labour for providing, 25 mm thick cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in floor even and fair finish complete all as specified and directed.
Material and labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over and including 15mm thick screed bed CM 1:6 complete all as specified and directed.
Material and labour for non skid ceramic tile (coloured) Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over and including 15mm thick screed bed CM 1:6 complete all as specified and directed.
Material and labour for PCC chequered tiles with white cement and pigment 25cm X 25cm X 25mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over and including 20mm thick screeding of CM 1:6 complete all as specified and directed.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms with moulded edges and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with over and including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.
Material and labour for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone,concrete wall and slabs complete all as specified and directed.
Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Supply and fixing for 15 mm bore GI tubing medium grade including fittings fixed to walls, ceiling or laid in floors complete all as specified and directed.
Supply and fixing for 20 mm bore GI tubing medium grade including fittings fixed to walls, ceiling or laid in floors complete all as specified and directed.
Supply and fixing in repair 15mm dia CP bib taps, fancy, Cast copper alloy with crutch or butterfly handle, screwed for iron pipe fixed complete all as specified and directed.
Supply and fixing in repair 15 mm dia CP fancy type stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.
Supply and fixing in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.
Supply and fixing in repair toilet paper holder, viperous China,coloured, box type fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repair tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm long fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints
Supply and fixing in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fixing in repair vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plug and porcelain stopper but including brackets 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.
Supply and fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm inclr 50 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.
Supply and fixing in repair 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repair 25 mm dia. gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed.
Supply and fixing in repair 20mm dia harrison rails, stainless steel, chromium plated curtain rod with fixing bracket, stops, rollers complete all as specified and directed.
Supply and fixing in repair stainless steel chromium plated for curtain rod brackets complete all as specified and directed.
Supply and fixing in repair CP grating 110 dia complete all as specified and directed.
Material and labour for cleaning of PVC water storage tanks capacity exc. 250 litres & n.exc. 500 litre, mechnised dewatering of water including sludge from the tanks, cleaning internal & external tank surfaces with high pessure water spray, vaccum cleaning, anti bactrial spray, UV radiation, spray of bleaching powder including writing date of cleaning (with thick paint in capital bold letter ) on each tank etc complete all as specified and directed. Note : Qouted rates shall deemed to be inclusive for (i) Opening and closing of tank cover properly before and after execution of cleaning work . (ii) Removal & refixing of float valve of any size & description before and after execution of work. (iii) Removal of sludge where directed by Engr-in-Charge. (iv) The works in respect of this item Nos 48.00.00 to 50.00 shall be executed within three months from the date of commencement, irrespective of period of completion / date of completion of Contract.
Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removing to store complete all as specified and directed.
Supply and fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms complete all as specified and directed.
Supply and fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms complete all as specified and directed.
Dismantiling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Supply and fixing for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Demolition of reinforced cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.
Dismantling of wrought iron or MS work of any description complete all as specified and directed.
Material and labour for roof trusses framed trussed pulins crance rails and fastening and heavey brackets framing ( Beam tee, angle, square, rectangular hellow sections or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250) complete all as specified and directed.
Material and labour for preparation of old treated plastered /unplastered surface of ceiling by brooming down and applying one coat of oil bound distemper complete all as specified and directed.
Material and labour for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
KUNDRA CONSTRUCTIONS
JK ENGINEERS
Shivalik Enterprises
D.N.Gupta and Sons
M/s Krishan Aggarwal
Bharat Enterprises
SONA BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .