Fire Safety Equiment work of Government ITI Uchchhal at Uchchhal, Ta. Uchchhal, Dist : Tapi (Supplying and installation of fire Hydrant, Pump, Alarm System)

Name of Work:- Fire Safety Equiment work of Government ITI Uchchhal at Uchchhal, Ta. Uchchhal, Dist : Tapi

(Supplying and installation of fire Hydrant, Pump, Alarm System)

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and reference to book Rate In

Quantity Unit Amount

No. of specifications) Figures

1 SITC of ISI approved electrical motor operated fire hydrant main 1.00 nos. 115000.00

pump set horizontal end suction back pull out top discharge

centrifugal fire pump set with all the standard accessories, base

frame, coupling and foundation bolts with all specification.

Motor Rating – 20 HP / 3 ph.

Suc × Del – 65 ×

2 SITC of ISI approved electrical motor operated fire hydrant Jockey 1.00 nos. 55500.00

pump set horizontal end suction back pull out top discharge

centrifugal fire pump set with all the standard accessories, base

frame, coupling and foundation bolts with all specification.

Flow : 180 LPM Head -70 mtr. Motor Rating – 7.5 HP / 3 ph. Suc ×

3 SITC OF CI heavy duty Foot Valve with bolts nuts washer gasket 3 2.00 nos. 12500.00

mm thick etc with all accessories.

4 SITC of Fire hydrant Pannel suitable for main pump and jockey 1.00 nos. 75400.00

pump with all accessories 30 H.P +7.5 H.P

5 SITC of Pressure switch (range 0 to 16 kg/cm2) 2.00 nos. 3750.00

6 SITC of Pressure gauge 150 mm dia type glycerin filled pressure 3.00 nos. 3500.00

gauge with isolation ball valve.

7 Supply, Fabrication & Erection of Above ground GI [ C ] class ERW 6.00 rmt. 3650.00

Pipe IS 1239- Providing, laying, jointing, testing and commissioning

of following sizes of pipes conforming to IS-1239 with all accessories

like all fittings (standard MS fitting with welded joint shall be used on

the pipes) including tees, elbows, reducers, union, flanges, rubber

gasket, GI nuts bolts, washer including supporting/fixing the pipe on

floor/ wall/ceiling with clamps, hangers as per specification. All

hangers, clamps, brackets etc. shall be of galvanized iron unless

specified otherwise and then supply of the same shall also be

included for rates under this head. With providing spray paint, two

coats of synthetic enamel paint of approved shade over a coat of zinc

chromate primer. Prior to application of primer the surface should be

cleaned for any dirt, rusts, rough substance etc. Welding process will

be as per IS. Suction & Delivery Piping, Fitting & Valves. External

Piping Work – Above Ground

8 Supply, Fabrication & Erection of Above ground GI [ C ] class ERW 90.00 rmt. 2600.00

Pipe IS 1239- Providing, laying, jointing, testing and commissioning

of following sizes of pipes conforming to IS-1239 with all accessories

like all fittings (standard MS fitting with welded joint shall be used on

the pipes) including tees, elbows, reducers, union, flanges, rubber

gasket, GI nuts bolts, washer including supporting/fixing the pipe on

floor/ wall/ceiling with clamps, hangers as per specification. All

hangers, clamps, brackets etc. shall be of galvanized iron unless

specified otherwise and then supply of the same shall also be

included for rates under this head. With providing spray paint, two

coats of synthetic enamel paint of approved shade over a coat of zinc

chromate primer. Prior to application of primer the surface should be

cleaned for any dirt, rusts, rough substance etc. Welding process will

be as per IS. Suction & Delivery Piping, Fitting & Valves. External

Piping Work – Above Ground

9 Supply, Fabrication & Erection of Above ground GI [ C ] class ERW 12.00 rmt. 2400.00

Pipe IS 1239- Providing, laying, jointing, testing and commissioning

of following sizes of pipes conforming to IS-1239 with all accessories

like all fittings (standard MS fitting with welded joint shall be used on

the pipes) including tees, elbows, reducers, union, flanges, rubber

gasket, GI nuts bolts, washer including supporting/fixing the pipe on

floor/ wall/ceiling with clamps, hangers as per specification. All

hangers, clamps, brackets etc. shall be of galvanized iron unless

specified otherwise and then supply of the same shall also be

included for rates under this head. With providing spray paint, two

coats of synthetic enamel paint of approved shade over a coat of zinc

chromate primer. Prior to application of primer the surface should be

cleaned for any dirt, rusts, rough substance etc. Welding process will

be as per IS. Suction & Delivery Piping, Fitting & Valves. External

Piping Work – Above Ground

10 SITC of Cast iron body butterfly valve according to IS : 13095, PN- 2.00 nos. 4250.00

1.6 , Iron Disc for size 150 mm dia and below lever operated and

above 150 mm dia gear operated complete with matting , flanges

galvanized nut bolts, washer, gasket 3 mm thick etc. with al

11 SITC of Cast iron body butterfly valve according to IS : 13095, PN- 2.00 nos. 5550.00

1.6 , Iron Disc for size 150 mm dia and below lever operated and

above 150 mm dia gear operated complete with matting , flanges

galvanized nut bolts, washer, gasket 3 mm thick etc. with al

12 SITC of Cast iron body Dual Plate wafer type NRV conf. IS : 210 , 1.00 nos. 4550.00

PN-1.6 with matting , flanges /IS/ANSI class 150# with galvanized

nut bolts, washer, gasket 3 mm thick etc. with al accessories.

13 SITC of Cast iron body Dual Plate wafer type NRV conf. IS : 210 , 1.00 nos. 5900.00

PN-1.6 with matting , flanges /IS/ANSI class 150# with galvanized

nut bolts, washer, gasket 3 mm thick etc. with al accessories.

14 SITC OF TWO WAY FBI - FIRE BRIGADE INLET- Providing and 1.00 nos. 7550.00

fixing fire brigade inlet head as per IS:904 Specification tested for

Kg/cm2 with 63 mm dia. instantaneous type inlet and 150mm dia..

Flanged outlet with built-in check valve for firebrigade twoconnection

to underground tanks and fire risers including companion flanges as

portable " E" including nuts, bolts & washers etc.

15 SITC of Single headed External Fire Hydrant Valve with 63 mm dia 4.00 nos. 5950.00

with m/f coupling (SS 304) instantaneous outlet conf. to IS

Type – A including mating flanges galvanized nuts, bolts, studs,

washer & gaskets 3 mm thick with all complete accessories

16 SITC of 63 mm dia. Stainless steel (SS 304) Universal Branch pipe 4.00 nos. 3250.00

conf. to IS :2871

17 SITC of Fire Fighting Hose Pipe -conf. to IS 636 Type A (type -1 ), the 4.00 nos. 5250.00

fire hose shall be 15 m long with 63 mm dia. Stainless steel (SS 304)

couplings conf. to IS :903 at both the ends for connection with the

hydrant valve and the branch pipe.

18 SITC of fabricated 3 mm MS Sheet,Single Door hose box of Size : 4.00 nos. 3450.00

450 mm * 600 mm * 250 mm painted with fire red as per IS 5, shade

no. 536 front 3 mm thick transparent glass with lock & key , handle

and brass hinges – to accommodate 1 nos of 15 mtr long hose and

no. branch pipe including supporting arrangement with civil work.

19 SITC of Swing type mild steel Hose reel drum with 20 mm dia and 30 4.00 nos. 7250.00

mtr. Long , rubber hose as per Is:83. The mounting stand shall be of

MS and the hose shall be fitted with SS arrangement with all

complete accessories.

20 Sitc of Air release valve 25mm dia connection 2.00 nos. 1650.00

21 Submitting the application to obtain the Fire NOC for one Year to 1.00 nos. 50000.00

SMC Department, Providing complete practical demonstration of Fire

System in presence of fire officer and submitting the photographs of

demonstration and system .obtaining and providing certificate the

FPCOR, Payment of NOC Fees, to SMC department, preparing

documentation work and Affidavit AMC with Notarization and

submitting department, follow up to receive NOC and Providing to

R&B including all above expenditure

22 SITC of Fire Alarm Panel 4 zone Conventional type with battery 1.00 nos. 23500.00

23 Sitc of smoke detector / Gas detector conventional type with 20.00 nos. 1350.00

complete all accessories

24 Sitc of Manual call Point (MCP) with complete all accessories 5.00 nos. 1150.00

25 Sitc of Audio Hooter with complete all accessories 5.00 nos. 1300.00

26 Sitc of cable for fire alarm 2 core 1.5 mm 300.00 rmt. 110.00

27 Sitc of copper armored cable for 40 HP Motor – 10 sq.mm × 4 core 30.00 rmt. 675.00

28 Sitc of copper armored cable for 10 HP Motor – 4 sq.mm × 4 core 30.00 rmt. 275.00

29 SITC of SS BALL VALVE 25 MM DIA 5.00 nos. 950.00

30 SITC of Structure MS Material as like Angle, C channel, I beam. 100.00 kg. 120.00

31 SITC OF SAFETY SIGANGES made of Zinc Sulphide based Glow in 960.00 sq. inch 8.00

dark, Rigid Sheet with High Luminous property enclosed in

transparent weather proof UV stabilized plastic pasted 3 mm thick

32 Core Cutting in wall and RCC slab with size as below 5.00 nos. 600.00

33 AMC FOR FIRE HYDRANT SYSTEM 1.00 nos. 100000.00

34 SITC of 3 layer PVC tank ISI 10000.00 lit. 7.00

35 Civil Work AND PLUMBING WORK 1.00 job 30000.00

36 Supply, installating and commissioning of ABC type fire extinguisher, 5.00 nos. 2140.00

capacity 5 kg. as per IS 14609 / 15683. with necessary fittings.

37 Supply, installating and commissioning of ABC type fire extinguisher, 5.00 nos. 6150.00

capacity 6 kg. as per IS 14609 / 15683. with necessary fittings.

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in figures and words) of the

estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In –

Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Executive Engineer

Signature of the contractor Tapi (R&B) Division