GE/KHU-72/2025-26 MAINTENANCE/ POLISHING/ PAINTING/ RECANNING OF REPAIRABLE WOODEN AND STEEL FURNITURE AT BIAMAH UNDER GE KHUMBATHANG

Amount

1. Table Office Officer steel (FD-1002/1003)

(a) Replacement of top from table office officer steel with new top of pre-laminated particle board 18 mm thick one side teak face and balance white other side and providing of 4mm thick teak wood beading all round the top as per drg and directed by Engr-in-Charge.Make- Century/Greenply/Ecoboard

(b) Removing of old UNSV drawer of table office officer steel S&F of new drawer made out of 1.0 mm thick PBI sheet as per drg.

(c) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

(d) Dismantling of old unserviceable existing lock and S&F new lock with duplicate keys rest all as per drg and as directed by Engr-in-Charge. Make- Godrej/Harrison

2. Almirah Med/Small steel with shelves (FD-1032)

(a) Repair to Almirah med/small with shelves by removing and replacement of UNSV shelves with new shelves made out of 1.0 mm thick PBI sheet and providing new members, including welding and grading , complete all as specified and as shown in drg and directed by Engr-in-Charge.

(b) All as per ser item No 3(a) here in before but legs

(c) Repair and replacement of locking device with threeway , complete all as specified and as shown in drg. Make- Godrej/Harrison

(d) Repair to large steel Almirah 1/2H, 1/2S by removing and replacement of old UNSV Steel handle with new Steel handle complete all as specified and as shown in drg.Make- Godrej/Harrison

3. Almirah steel Large with shelves(Drg No FD-1031)

(a) Repair to large steel Almirah with shelves by removing and replacement of UNSV shelves with new shelves made out of 1.0 mm thick PBI sheet and providing new members, including welding and grading , complete all as specified and as shown in drg. and directed by Engr-in-Charge.

(b) All as per ser item No 2(a) here in before but legs

(c) Repair and replacement of locking device with threeway, complete all as specified and as shown in drg.Make- Godrej/Harrison

(d) Repair to large steel Almirah 1/2H, 1/2S by removing and replacement of old UNSV Steel handle with new Steel handle complete all as specified and as shown in drg.Make- Godrej/Harrison

4. Almirah Med/small steel 1/2H, 1/2S (FD-1034)

(a) Repair to Almirah med/small steel 1/2H, 1/2S by removing and replacement of UNSV shelves with new shelves made out of 1.0 mm thick PBI sheet and providing new members, including welding and grading , complete all as specified and as shown in drg and directed by Engr-in-Charge

(b) All as per ser item No 4(a) here in before but legs

(c) Repair to Almirah med/small steel 1/2H, 1/2S by removing and replacement of old UNSV locking device with new locking device threeway , complete nall as specified and as shown in drg. Make- Godrej/Harrison

(d) Repair to large steel Almirah 1/2H, 1/2S by removing and replacement of old UNSV Steel handle with new Steel handle complete all as specified and as shown in drg.Make- Godrej/Harrison

5. Locker bed side steel (FD -1029)

(a) Replacement of old UNSV CP handle with new CP handle 100mmx3mm thick complete all as specified and as shown in drwaing

(b) Replacement of old UNSV Hasp & staple with new hasp & sraple mild chromium plated of size 100 mmcomplete all as specified and as shown in drawing.

(c) Replacement of old UNSV legs of locker steel with new legs made of 10 mm thick PBI sheet , complete all as specified and as shown in drawing

(d) Replacement of old UNSV butt hinges of shutter 75 mm mild steel complete all as specified and as shown in drawing

6. Table Office Officer steel (FD-1002/1003)

(a) Replacement of top from table office officer steel with new top of pre-laminated particle board 18 mm thick one side teak face and balance white other side and providing of 4mm thick teak wood beading all round the top as per drg and directed by Engr-in-Charge.Make- Century/Greenply/Ecoboard

(b) Removing of old UNSV drawer of table office officer steel S&F of new drawer made out of 1.0 mm thick PBI sheet as per drg.

(c) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

(d) Dismantling of old unserviceable existing lock and S&F new lock with duplicate keys rest all as per drg and as directed by Engr-in-Charge. Make- Godrej/Harrison

7. Chair CB steel with Arms (FD-75M)

(a) Replacement of old UNSV seats from chair CB steel with Arms with new seats of Ist class sheesham wood wrought duty canned with plastic cane 2 mm with border of 3mm thick in Godrej pattern wooden portion of seat shall be painted with two coat of synthetic enamel black paint , complete nall as specified and as shown in drg and dricted by Engr-in-Charge.

(b) All as per ser item No 7(a) here-in-before but back

(c) All as per sel item No 7(a) here-in-before but Arms

8. Table 3'x2' Steel with drawer (FD-1008)

(a) Dismantling of old existing unserviceable locking device and S&F new locking device to the steel drawer of table by appropriate steel screw/rivets. All as specified & shown on drg.Make- Godrej/Harrison

(b) Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18mm thick one side natural teak faced and other white (exterior grade) providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing. Make- Century/Greenply/Ecoboard

(c) Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

9. Table 3'x2' Steel with out drawer (FD-1007)

(a) Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18mm thick one side natural teak faced and other white (exterior grade) providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing and dricted bt Engr-in-Charge. Make- Century/Greenply/Ecoboard

(b) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

10. Table Office clk steel (FD-1004)

(a) Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18 mm thick one side natural teak faced and other commercial providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing and dricted by Engr-in-Charge. Make- Century/ Greenply/ Ecoboard

(b) Replacement of unserviceable/damaged drawer from table with new drawer made of 1 mm thick PBI sheet including painted with two coats of synthetic enamel paint over a coat of red oxide (primer) rest all as per drg and as directed by Engr-in-Charge.

(c) Dismantling of old unserviceable existing lock and S&F new lock with duplicate keys rest all as per drg and as directed by Engr-in-Charge.Make- Godrej/Harrison

(d) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

11. Foam w/o back (FD-1027/FD-77)

(a) Replacement of old UNSV seat with new seat planks of size 1500x255x25mm made out of first class sheesham wood planks wrought all as per drawing No FD-1027/FD-77 and as approved/directed by Engr-in-charge

12. Foam with back (FD-78(M)

(a) Replacement of old UNSV seat with new seat planks of size 1500x255x25mm made out of first class sheesham wood planks wrought all as per drawing No FD-78(M) and as approved/directed by Engr-in-charge

13. Chair writing cushioned seat and back (FD/E6/MAP/12)

(a) Replacement of old seats from Chair writing 120 mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam with PVC lipping all aropund. The Polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 kg per cubic mtr thick and hardness 20 +/- 2 kg on hampden machine all as shown in drg and as approved/directed by Engr-in-Charge. Make - Sleepwell/Recron/Feather foam

(b) Replacement of old back from Chair writing 120 mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam with PVC lipping all aropund. The Polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 kg per cubic mtr thick and hardness 20 +/- 2 kg on hampden machine all as shown in drg and as approved/directed by Engr-in-Charge.Make - Sleepwell/Recron/Feather foam

14. Bed plywood Top (Drg No FD 246/247 & 1102)

(a) Supply and fix in position head rest including legs made out of first class teak wood frame and supply & fixing 4 mm thick plywood one side teak faced on the frame . Complete all as specified and shown in drg and directed by Engr-in-charge. Make Century,Greenply,Durian

(b) All as per srl item No 16(a) here-in-before but foot rest. Make Century,Greenply,Durian

(c) Material and labour for replacement of commercial plywood 12mm thick ISI marked BWR on the top of the bed including taking out old broken/chipped of plywood , complete all as specified and shown in drg. Make Century,Greenply,Durian

(d) Material and labour for replacement of long rail of first class teak wood of size 100x40x1980mm wrought and ends slightly rounded off made to shape, complete all as specified and shown in drg.

(e) Material and lobour for replacement of stiffener of first class teak wook of size 60x40x900mm duly wrought made to shape complete all as specified and shown in drg.

15. Table dressing gents with Mirror (Drg No FD-230/372)

(a) Dismantling of existing old unserviceable ply from back of mirror and S & F of new plywood 6mm thick commercial BWR quality of mirror frame complete all as specified and directed and as shown on drawings.Make Century,Greenply,Durian

(b) All as per item No18(a) here-in-before but Removing of existing unserviceable looking mirror from table dressing Gents and S&F new lookiing mirror size 380 x 480 mm x 5mm thick of Modiguard/Atul complete all as specified and directed and as shown on drawings.

(c) All as per item No 18(a) here-in-before but Dismantling of unserviceable frame of looking mirror . S&F New frame 20mm x 25mm of Ist class seasoned wood in section made to shape as shown on drawing and 12mm x 12mm in section Ist class seasoned wood, beading shall be provided at the back .

(d) All as per item No 18(a) here-in-before but S & F 3mm thick flat iron key plates of MS Sheet shall be fixed on the top of mirror as directed by Engineer-in-Charge and painted with black paint.

(e) All as per item No 18(a) here-in-before but Dismantling of u/s knob of table dressing Gent and S&F new knob of aluminium anodized of size 25mm dia with nut & washer.

(f) All as per Srl items No 19(a) here-in-before but Dismantling of old unserviceable drawer S&F new drawer of 12mm thick prelaminate particle board with knob 25mm dia all as specified and shown on drg.Make- Century/Greenply/Ecoboard

16. Table peg( FD-277/384)

(a) Dismantling of existing unserviceable top and S&F new top 18mm thick prelaminated particle board one side natural teak wook, teak wook beading alround the top 4mm thick shall be provided. Rest all as shown on drgs and as specified and as directed by Engr-in-charge.Make Century,Greenply,Ecoboard

(b) All as per Ser items No 20(a) here-in-before but . Long rail of of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(c) All as per Ser items No 20(b) here-in-before but side top rail of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(d) All as per Ser items No 20(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and shown on drawing.

17. Teapoy ( FD-278)

(a) Dismantling of existing unserviceable top and S&F new top of size 600x450x18mm thickprelaminated particle boards one side natual teak wood teak wood beading alround the top 4mm thick hall be provided Rest all shown on drawings and as specifed and directed by Engr-in-Charge.Make- Century/ Greenply/ Ecoboard

(b) All as per Ser item No 22(a) here-in-before but long rail of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(c) All as per Ser item No 22(a) here-in-before but short rail of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(d) All as per Ser item No 22(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(e) All as per Ser Item No 22(a) here-in-before but side stiffner of Ist class seasoned wood complete all as specified and directed and shown on drawing.

18. Table Bed Side Wdn ( FD-276)

(a) Dismantling of existing Unsv parts of Table Bed Side . Supply and fixing of new top made out of pre-laminated particle board 18 mm thick exterior grade with 4 mm thick teakwood beading alround the top complete all as specified and shown on drg. Make- Century/ Greenply/ Ecoboard

(b) All as per ser Item No 23(a) here-in-before but bottom.

(c) All as per ser Item No 23(a) here-in-before but sides.

(d) All as per ser Item No 23(a) here-in-before but shelf.

(e) All as per ser Item No 23(a) here-in-before but Removing old unsv back ply and supply and fix 6 mm thick commercial plywood with headless nails of Table bed Side .Make- Century/ Greenply/ Durian

19. Table Centre (FD-235/FD-274)

(a) Material and labour for providing front or Rear leg of Seasoned wood complete.of Table Centre including french polishing with one or more coats and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

(b) All as per Srl item No 24(a) here-in-before but long rail of of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(c) All as per Srl item No 24(a) here-in-before but short top rail of of seasoned wood complete all as specified and directed and as shown on drawings

(d) All as per Srl item No 24(a) here-in before but side stiffener of sesoned wood complete all as specified and directed and as shown on drawings

(e) All as per Srl item No 24(a) here-in before but Table Top of size 900mm x450mm made out of 17mm thick pre-laminated particle board including 4mm thick teakwood beading all round and specified and shown on drg.Make- Century/ Greenply/ Ecoboard

20. Table Dining 6 Person/8 Person (FD-273/239/376/115)

(a) Dismantling of existing unserviseable top and S&F of new top of 18 mm thick prelaminated particle board one side natural teak wood teakwood beading alround the top 4 mm thick shall be provided rest all as specified and shown on drgs.Make- Century/ Greenply/ Ecoboard

(b) All as per Srl item No 25(a) here-in-before but long rail of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(c) All as per Srl item No 25(a) here-in-before but short rail of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(d) All as per Srl items No 25(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and shown on drawing.

(e) All as per Srl items No 25(a) but S & F of Ist class seasoned wood corner bracket 100mmx100mm made to shape at top to leg and frame with screws all as directed by Engr-in-Charge.

21. Table Dining ORs Almn top/sunmica top ( FD-165(M)

(a) Removing of old UNSV Top from table dining ORs and S&F new table top made out of MDF board commercial type ISI marked 18mm thick (Make- Century/ Greenply/ Ecoboard)duly covered with aluminium sheet 22 gauge of required size complete all as specified and shown on drg .All as directed by Engr-in-Charge.

(b) All as per ser Item No26(a) here-in-before but Removing of old UNSV legs and S&F of new legs Made of 25 Sq mm MS tube having 1.6mm wall thickness of 760mm high by Gas welding . All as directed by Engr-in-Charge.

(c) All as per ser Item No 26(a) here-in-before but Gas welding to broken parts of frame wherever required and grinding to smooth finish. Welding alround consider one point

(d) All as per ser Item No 26(a) here-in-before but Removing of old UNSV hard rubber shoes and S&F new PVC/ Hard rubber shoes of approved quality.

22. Table 3' x 2' wdn with drawer (FD-282)

(a) Dismantling of existing unserviceable top S&F of new top of size 3' x 2' x18mm thick prelaminated particle board one side natural teak wook, teak wood beading alround the top 4mm thick shall be provided. Rest all as sepecifed and shown on drgs and directed by Engr-in-Charge. Make of board : Century, Greenply,Eco Board.

(b) All as per Srl item No 27(a) here-in-before but long top rail of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(c) All as per Srl item No 27(a) here-in-before but small top rail of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(d) All as per Srl item No 27(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(e) All as per Srl item No 27(a) here-in-before but side stiffner of Ist class seasoned wood complete all as specified and directed and as shown on drawings

23. Sofa Set 4 Seater/5 Seater (FD-281/373/1113)

(a) Removing of old unserviceable cushion from seat and back & S&F of new cushion of the size of 21"x22"x4" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa set 4/5 seat specified shown on drg and directed by Engr-in -Charge.Make - Sleepwell/Recron/Feather foam

(b) All as per ser Item No 28(a) here-in-before but Front/Rear rail of size 35x100mm in section of 1535mm long

(c) All as per ser Item No 28(a) here-in-before but Side rail of size 35mmx100mm in section of 100mm long

(d) All as per ser Item No 28(a) here-in-before but 50mmx20mm wooden battens of 100mm long

(e) All as per ser Item No 28(a) here-in-before but back Rail all as specified and shown on drawing.

(f) All as per ser Item No 28(a) here-in-before but arms all as specified and shown on drawing.

24. Sofa chair single Seater (FD-281/1113)

(a) Removing of old unserviceable cushion from seat and back & S&F of new cushion of the size of 21"x22"x4" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa single seat specified shown on drg asnd dricted by Engr-in -Charge Make - Sleepwell/Recron/Feather foam

(b) All as per ser Item No 29(a) here-in-before but Front/Rear rail of size 35x100mm in section of 1535mm long

(c) All as per ser Item No 29(a) here-in-before but Side rail of size 35mmx100mm in section of 100mm long

(d) All as per ser Item No 29(a) here-in-before but 50mmx20mm wooden battens of 100mm long

(e) All as per ser Item No 29(a) here-in-before but back Rail all as specified and shown on drawing.

(f) All as per ser Item No 29(a) here-in-before but arms all as specified and shown on drawing.

25. Chair dining (FD-1105)

(a) Material and labour for replacement of front legs with first class teak wood duly polishing made to shape wrought on all side fixed with bamboo pins and fevicol by making Tennon/Groove joints, complete all as specified and shown in drawing and directed by Engr-in-Charge.

(b) All as per Ser item 30(a) here-in-before but rear legs complete all as specified and directed and as shown on drawings

(c) All as per Ser item 30(a) here-in-before but side/back/front rail complete all as specified and directed and as shown on drawings

(d) All as per Ser item 30(a) here-in-before but back rest battern complete all as specified and directed and as shown on drawings

(e) All as per ser item No 30(a) here-in-before but stiffener `H' type complete all as specified and directed and as shown on drawings

26. Chair Easy (FD-1108)

(a) Material and labour for replacement of front legs with first class teak wood duly polishing made to shape wrought on all side fixed with bamboo pins and fevicol by making Tennon/Groove joints, complete all as specified and shown in drawing and directed by Engr-in-Charge.

(b) All as per Ser item 31(a) here-in-before but rear legs complete all as specified and directed and as shown on drawings

(c) All as per Ser item 31(a) here-in-before but side/back/front rail complete all as specified and directed and as shown on drawings

(d) All as per Ser item 31(a) here-in-before but Arms complete all as specified and directed and as shown on drawings

27. Chair Writing (FD-280)

(a) Material and labour for replacement of front legs with first class teak wood duly polishing made to shape wrought on all side fixed with bamboo pins and fevicol by making Tennon/Groove joints, complete all as specified and shown in drawing and directed by Engr-in-Charge.

(b) All as per Ser item 32(a) here-in-before but rear legs complete all as specified and directed and as shown on drawings

(c) All as per Ser item 32(a) here-in-before but side/back/front rail complete all as specified and directed and as shown on drawings

(d) All as per Ser item 32(a) here-in-before but back rest battern complete all as specified and directed and as shown on drawings

(e) All as per Ser item 32(a) here-in-before but Arms complete all as specified and directed and as shown on drawings

(f) All as per ser item No 32(a) here-in-before but stiffener `H' type complete all as specified and directed and as shown on drawings

28. Chair Easy cushioned (FD-358)

(a) Supply & fixing in replacement of rear and front legs of Ist class hard wood MP teak including polishing to match with the existing, size and shape on drawing complete all as specified and directed by Engr-in-Charge.

(b) All as per Ser item 33 (a) here-in-before but side/back/front & top rail complete all as specified and directed and as shown on drawings

(c) Supply and fixing in replacement of foam 32 density 75mm thick (Make Sleep well/Feather Foam/Recron) and including covering with Rexine complete all as per drawing and as directed.

(d) All as per Ser item 33 (a) here-in-before but Arms complete all as specified and directed and as shown on drawings

29. Taking out unserviceable/old PVC shoes from all types of chairs and supply and fixed of new PVC shoe with steel screw, complete all as specified and shown in drawing and as directed.

30. Re-canning of different types of chairs wooden with plastic cane 2 mm wide semi round of white colour, border of seat shall be canned with 3mm wide plastic cane. Canning shall be done as per Godrej pattern including taking out unserviceable cane from chairs and removing from site. Complete all as specified and directed by Engr-in-charge.

31. Charpoy IP Hard Top (FD/MAP/II/01 & FD/MAP/II/04)

(a) Removing of old UNSV plywood top of Charpoy IP Hard top and tightening the frame and making its suitable for fixing plywood top and providing 12 mm thick commercial plywood ISI marked, BWR type fixed with 6mm dia 65mm long nuts and bolts with washers (total 10 Nos) complete all as specified and directed by Engr-in-charge. Make- Century/ Greenply/ Durian

32. Bed hard (FD/E6/MAP/08(R)

(a) Removing of old UNSV plywood top of Bed IP Hard top and tightening the frame and making its suitable for fixing plywood top and providing 12 mm thick commercial plywood ISI marked, BWR type fixed with 6mm dia 65mm long nuts and bolts with washers (total 10 Nos) complete all as specified and directed by Engr-in-charge. Make- Century/ Greenply/ Durian

33. Charpoy GI pipe double bunk (Op Wks)

Removing of old UNSV plywood top of Charpoy GI double bunk and tightening the frame and making its suitable for fixing plywood top and providing 12 mm thick commercial plywood ISI marked BWR type, complete all as specified and directed by Engr-in-charge. Make- Century/ Greenply/ Durian

34. Table 3' x 2' wdn without drawer(FD-284)

(a) Dismantling of existing unserviceable top S&F of new top of size 3' x 2' x18mm thick prelaminated particle board one side natural teak wook, teak wood beading alround the top 4mm thick shall be provided. Rest all as sepecifed and shown on drgs and directed by Engr-in-Charge. Make of board : Century, Greenply,Eco Board.

(b) All as per Srl item No 27(a) here-in-before but long top rail of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(c) All as per Srl item No 27(a) here-in-before but small top rail of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(d) All as per Srl item No 27(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(e) All as per Srl item No 27(a) here-in-before but side stiffner of Ist class seasoned wood complete all as specified and directed and as shown on drawings

35. Chair computer revolving adjustable (FD/E6/MAP/01)

(a) Replacement of old UNSV Pedestal assy injection moulded in black 30% glass filled nylon 10.5 mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the colters. It is 600 mm pitch centre dia all as per drawing No FD/E6/MAP/01 and as approved/directed by Engr-in-charge

(b) Replacement of old UNSV black handle all as per drawing No FD/E6/MAP/01 and as approved/directed by Engr-in-charge

(c) Replacement of old UNSV broken wheels all as per drawing No FD/E6/MAP/01 and as approved/directed by Engr-in-charge

36. Chair writing cushioned seat and back (FD/E6/MAP/12)

(a) Replacement of old seats from Chair writing 120 mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam with PVC lipping all aropund. The Polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 kg per cubic mtr thick and hardness 20 +/- 2 kg on hampden machine all as shown in drg and as approved/directed by Engr-in-Charge. Make - Sleepwell/Recron/Feather foam

(b) Replacement of old back from Chair writing 120 mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam with PVC lipping all aropund. The Polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 kg per cubic mtr thick and hardness 20 +/- 2 kg on hampden machine all as shown in drg and as approved/directed by Engr-in-Charge.Make - Sleepwell/Recron/Feather foam

37. Bed plywood Top (FD-246/247 & FD-1102)

(a) Supply and fix in position head rest including legs made out of first class teak wood frame and suply & fixing 4 mm thick plywood one side teak faced on the frame . Complete all as specified and shown in drg and directed by Engr-in-charge. Make Century,Greenply,Durian

(b) All as per srl item No 16(a) here-in-before but foot rest. Make Century,Greenply,Durian

(c) Material and labour for replacement of commercial plywood 12mm thick ISI marked BWR on the top of the bed including taking out old broken/chipped of plywood , complete all as specified and shown in drg. Make Century,Greenply,Durian

(d) Material and labour for replacement of long rail of first class teak wood of size 100x40x1980mm wrought and ends slightly rounded off made to shape, complete all as specified and shown in drg.

(e) Material and lobour for replacement of stiffener of first class teak wook of size 60x40x900mm duly wrought made to shape complete all as specified and shown in drg.

38. Table 3' x 2' wdn with drawer (FD-282)

(a) Dismantling of existing unserviceable top S&F of new top of size 3' x 2' x18mm thick prelaminated particle board one side natural teak wook, teak wood beading alround the top 4mm thick shall be provided. Rest all as sepecifed and shown on drgs and directed by Engr-in-Charge. Make of board : Century, Greenply,Eco Board.

(b) All as per Srl item No 38(a) here-in-before but long top rail of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(c) All as per Srl item No 38(a) here-in-before but small top rail of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(d) All as per Srl item No 38(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and as shown on drawings

(e) All as per Srl item No 38(a) here-in-before but side stiffner of Ist class seasoned wood complete all as specified and directed and as shown on drawings

39. Sofa Set 4 Seater/5 Seater (FD-281/373/1113)

(a) Removing of old unserviceable cushion from seat and back & S&F of new cushion of the size of 21"x22"x4" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa set 4/5 seat specified shown on drg and directed by Engr-in -Charge.Make - Sleepwell/Recron/Feather foam

(b) All as per ser Item No 39(a) here-in-before but Front/Rear rail of size 35x100mm in section of 1535mm long

(c) All as per ser Item No 39(a) here-in-before but Side rail of size 35mmx100mm in section of 100mm long

(d) All as per ser Item No 39(a) here-in-before but 50mmx20mm wooden battens of 100mm long

(e) All as per ser Item No 39(a) here-in-before but back Rail all as specified and shown on drawing.

(f) All as per ser Item No 39(a) here-in-before but arms all as specified and shown on drawing.

40. Sofa chair single Seater (FD-281/1113)

(a) Removing of old unserviceable cushion from seat and back & S&F of new cushion of the size of 21"x22"x4" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa single seat specified shown on drg asnd dricted by Engr-in -Charge Make - Sleepwell/Recron/Feather foam

(b) All as per ser Item No 40(a) here-in-before but Front/Rear rail of size 35x100mm in section of 1535mm long

(c) All as per ser Item No 40(a) here-in-before but Side rail of size 35mmx100mm in section of 100mm long

(d) All as per ser Item No 40(a) here-in-before but 50mmx20mm wooden battens of 100mm long

(e) All as per ser Item No 40(a) here-in-before but back Rail all as specified and shown on drawing.

(f) All as per ser Item No 40(a) here-in-before but arms all as specified and shown on drawing.

41. Painting of following steel furniture with synthetic enamel paint (OG/smoke gray with spray painting) including preparation of surfaces and welding/denting wherever required and complete all as specified and as shown in drawing and directed by Engr-in-Charge. .Make- Asian/Nerolac/Berger

(a) Almirah steel Large 1/2H, 1/2S(FD-1033)

(b) Almirah steel Large with shelves(FD-1031)

(c) Almirah Med/small steel with shelves (FD-1032)

(d) Almirah Med/small steel 1/2H, 1/2S (FD-1034)

(e) Locker bed side steel (FD -1029)

(f) Table Office Officer steel (FD-1002/1003)

(g) Chair CB steel with Arms (FD-75M)

(h) Chair CB steel without Arms (FD-75M)

(j) Table 3'x2' Steel with drawer (FD-1008)

(k) Table 3'x2' Steel without drawer (FD-1007)

(l) Table Office clk steel (FD-1004)

(m) Form w/o back (FD-1027/FD-77)

(n) Table Dining ORs Almn top/sunmica top (FD-165(M)

(o) Charpoy IP Hard Top (FD/MAP/II/01 & FD/MAP/II/04)

(t) Side rack steel with tray (FD-1083)

(u) Trestle store room steel (FD-1043)

(v) Bed hard (FD/E6/MAP/08(R)

42. Polishing of following Wooden furniture after cleaning smoothing the old or new surface with sand/emery paper , filling the borer holes/cracks with putty wherever required and applying the raw siana/burnt siana as per requirement, make the surface smooth again with sand/emery paper and polish the wooden furntiture with French polish complete all as specified and as shown in drawing and directed by Engr-in-Charge.Make- Asian/Nerolac/Berger

(a) Bed plywood Top (FD 246/247 & 1102)

(c) Table dressing gents with Mirror (FD-230/372)

(e) Table Peg(FD-277/384)

(f) Table writing (FD-275/1118)

(g) Teapoy ( FD-278)

(h) Table Bed Side Wdn ( FD-276)

(j) Table Centre (FD-235/FD-274)

(k) Table Dining 6 Person/8 Person (FD-273/239/376/115)

(l) Table 3' x 2' wdn with drawer(FD-283)

(m) Sofa Set 4 Seater (FD-281/373/1113)

(n) Sofa Set 5 Seater (FD-281/373/1113)

(o) Sofa chair single Seater (FD-281/1113)

(p) Chair dining(FD-1105/FD/MAP/03)

(q) Chair Easy (FD-1108)

(r) Chair Writing (FD-280)

(s) Chair Easy cushioned (FD-358)

Deduct Credit for Demolished/Dismantled material Rs (-) 9,179.05 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

R K BUILDERS (BID ID -3479221)