JANAPAD PILIBHIT MEIN MAJHOLA BIRAHANI BHARA PACHAPEDA CHAAR LANE ANYA JILA MAARG PAR ANTARRAJYA SEEMA PAR PRAVESH DWAAR PAR PRAKASH VYAVASTHA KA KAARYA

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Superintending Engineer, 47th (E/M) Circle, PWD, Moradabad.

Name of Work: जनपद पीलीभीत में मझोला बिरहनी (भरा पचपेड़ा) चार लेन (अन्य जिला मार्ग) पर अन्तर्राज्यीय सीमा पर प्रवेश द्वार पर प्रकाश व्यवस्था का कार्य।

Contract No: 1639/3WE(BLY)-47/25 Dated 16-10-2025

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Supply/ Fixing , testing and commissioning of 6 mtr All in one Solar Integrated pole system with aesthetically designed road lighting optic luminaire of IP 66 & Integrated Pole 6 Mtr. Solar pole Light, with 5 year warranty against any manufacturing defects Complete in all respect. 1. System lumen > 6000Lm with efficacy of >140 lm/watt. System wattage shall not be more than 45 W. Life expectancy >50000 Hr, color temperature 4000 K, standard light profile 6 Hr 100% + 6 Hr 50%, CRI >70, average lighting beam angle 120 degree, housing pressure die cast aluminum with corrosion resistance polyester powder coated, Impact resistance > IK 07, lamp starting time should be not more than 10 seconds. thermal management system should be provided and LED must be mounted on heat conductive sink with sufficent large surface Area by means of fins to dissipate the heat to ambient air. Over voltage Protection. 2. Battery capacity minimum 100 Ah, LiFePO4 , life cycle minimum 2000 @ 90% DOD with IP 68. With minimum Backup for Two days @ standard light profile 6 Hr 100% + 6 Hr 50% per day. 3.PV module- Monocrystalline minimum 360 Wp / 23Voc Solar cell efficiency minimum 16.4 %, 8 site string, total nominal peak power output minimum 360wp, Water proof connectors. 4.Total Aluminum alloy column length 6 mtr. with min. 20 mm thick reinforced base plate, or Total column length 6 mtr. with lower 2.0 mtr. galvanised / powder coated MS Pipe of min. 04mm thick with min. 12 mm thick reinforced base plate, Upper 4 mtr. Aluminum alloy to hold solar PV module and Luminaire. 5. Foundation 1:2:4 RCC Cross section:- minimum 2 times size of base plate Deep:- minimum 1/6 times length of pole Foundation Bolt:- minimum 20mm dia and 600mm long 6. Test Report 1. Standard fixture should confirm to applicable IEC 60598-1, IEC 61000-3-2, IEC 61547, LM 79 & LM 80, BIS 2. Test report for LED LM 80 (IS-16105), Internal wiring, fiber glass, insulted multistrand wire. 3. Over voltage Protection Declaration of Conformity safety compliance report for charge controller and should be certified as per IEC 60598-1, IEC 61000-3-2, IEC 61547. 4. Test report for Vertical Pole tested for shock & vibration, wind force to meet safety parameters 5. Battery test report from 3rd party, along with other test reports. IEC 62133:2012, BIS certification etc. 6. BIS, IEC 61215, IEC 61730 for Solar PV Panel 1 12 Nos. 252000 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Comprehensive Operation and maintenance of all in one Integrated solar light system for five year (2.5% per year after one year) 2 4 Year 75600 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words