Construction of 4 Nos Type-II Quarters for PWD Staff at Gohar, Tehsil Chachiot, Distt. Mandi HP

Amount

Providing form work with steel plates 3.15mm(Three point fifteen millimeter) thick welded with angle iron in frame 30x30x5mm(Thirty millimeter into thirty millimeter into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and bellies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in situ-reinforced concrete and pain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge in:-

Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc upto any thickness.

Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor..

Columns, pillars, Posts and struts, Square, rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing

Edges of slabs and breaks in floor and walls (under 20cm width).

Providing and laying cement concrete M-25 1:1.5:3 (1 cement : 1.5 Sand : 3 graded stone aggregate 20 mm nominal size) and curing complete mechanically mixed and vibrated excluding cost of form work. and reinforcement for reinforced cement concrete work as per Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Suspended floors, roofs ,landings and shelves and their support, balconies, beams, girders, breasumers and cantilevers upto any floor

Columns, pillars posts and struts square rectangular polygonal in plain From Floor upto any floor

Stair cases (except spiral stair cases) excluding landing but including preparing of the top surface and finishing of nosing upto any floor

Providing and laying upto all level reinforced cement concrete 1:2:4 (one cement : two Sand :four graded stone aggregate 20mm nominal size) mechanically mixed and vibrated to give an smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the like and curing complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge upto any floor

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to any level with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Brick work using common burnt clay building bricks in super structure in cement mortar 1:6 (1 cement : 6sand) 2nd class brick. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge upto any floor.

Half brick masonry in common burnt clay building bricks in super structure in cement mortar 1:4 (1cement : 4sand) 2nd class brick with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge upto any floor.

Providing and fixing anodized aluminum tower bolts (barrel type ) anodized trans parent or dyed to equired shade and colour with screws etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

200x10mm (Two hundred x ten millimeter)

150x10mm (One hundred fifty x ten millimeter)

100x10mm (One hundred x ten millimeter)

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

125 mm (One hundred x twenty five millimeter)

100 mm (One hundred millimeter)

75 mm (seventy five millimeter)

Providing and fixing 100mm (One hundred millimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.300x16mm (three hundred x sixteen millimetre) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

300x16mm (Three hundred x Sixteen millimeter)

250x16mm (Two hundred fifty x Sixteen millimeter)

Providing and fixing 19mm thick ( ninteenmilimetre) thick terramite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet of 8mm(Eight milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm thick hard wood edging. the shutters from out side shall be finished with 1mm thick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories as per detail architectural drawing No. 195/1 to 199/1 iwith in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and Laying 10mm thick full body vitrified tiles of size 600x600 mm of Nitco or equivalant approved shade and colour in flooring,treads of steps and landings laid over 12mm thick cement mortar1:3 (1 cement : 3 sand) jointedwith cement slurry mixed with pigment to match the shade of tiles as required complete. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. upto any floor.

Providing and Laying 10mm thick full body vitrified tilesof size 600x600 mm approved shade and colour in Skirting 10mm (average)thickness base of cement 12mm mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. upto any floor.

Providing and laying marble work(Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick . curing complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. upto any floor

6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one Cement : three Sand) and curing complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. upto any floor

15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:5 (one cement:six sand) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. upto any floor

15mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:6 sand) and curing complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge. upto any floor.

Providing 2nd class deodar wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 40 mm panelled glazed or panelled and glazed shutters in 2nd class deodar wood for doors windows and clerestory windows. Including black enamelled iron butt hinges with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Provding and fixing M.S grills of required pattern in wooden/steel frames of windows etc with M.S flats, square or round bars with round headed bolts and nuts or by screws plain grill. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 40 mm thick 2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw etc with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other forein matter sand papering and knotting ready mixed paint with wood priming pink of approved brand and manufacture (Nerolac/Asian Shalimar) conforming to IS: 3536-1966 brushing with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning of oil, grease,dirt and and other foreign matter sand papering and stopingready mixed paint other thanwhite with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture of and of required shade of undecorated wall surface to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade i/c thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth i/c applying of putty a required for making the surface with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing prepainted roofing with top skin of 0.60mm (Zero point six zero milimetre) thick preprinterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer complete with all accessories as required with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing ridges or hips 60 cm (Sixty centimeter) overall with 0.60 mm (Zero point sixty millimeter) thick preprinted sandwich puff steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm(Six millimeter) dia and preprinted G.I. limpet and bitumen washers with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing valley 60cm (Sixty centimetre overall 0.60mm (Zero six zero milimetre)thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat og regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with screws, preprinted iron J and L hooks,bplts & nuts & nuts 6mm (Six milimetre)dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required awith in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing flushing 38cm(Thirty centimeter) overall width 0.60mm ( Zero point six milimetre)thick pre painted sheet in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6mm(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing M.S. BP Sheet 1.66 mm(One point sixty six milimetre) to 2mm (Two milimetre) thick in eves board/ facia/soffit/ceiling including cutting ,fixing and welding to steel roof members and applying a coat of red lead primer with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in positiobn and applying a priming coat of red lead paint awith in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

In beams, joists, channels, angles, tees, flats with connection plates or angle plates as in main and cross beams, hip and jack rafter, purlins connected to comman rafter and the like. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 85cm height railing with MS rectangular hollow pipe 75x50mm of 14 gauge M.S.black sheet make hand rail and M.S. square bars 20mm size ballusters at 30cm centre to centre duly welded with 2Nos. MS flat 40x6mm size and 20mm M.S. square bars, lugs 10cm. long at lower end of ballusters embeded in RCC steps or waist slab including priming coat of steel primer and painting with steel enamal paint other than white as per design and instruction of Engineer-In-Charge.

Providing and fixing on wall face 100mm (One hundred milimetre) dia PVC(D-Plast) rain water pipes of working pressure not less than 4.5 Kg/sqm(Four point five kilogram per square metre) including filing the joint with approved adhersive with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing on wall face (D-Plast) accessories for rain water pipes including filling the joint with approved adhesive with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

PVC Plain Bend 100mm(One hundred milimetre) dia.

Shoe 100mm dia(One hundred milimetre) dia.

Providing and fixing 15 cm (fifteen centimetre) wide 45 cm (forty ive centimetre) overall semicircular plain G.I.sheet Gutter with iron brackets 40x3mm(forty five milimetre) size bolts and nuts and washers etc. including making necessary conections with rain water pipe with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreignmatter and scoured with wire brushes fine steel wool scrubers and sand paper complete with ready mixed priming pant brushing red leadred oxide/zinc oxide chrome with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Painting two coats (excluding priming coat) on new steel and other metal surfces surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel paint other than white iwith in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing bright finished brass 100mm.(One hundred millimeter) Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing glazed with glass panes of 4 mm (four milimetre) thickness (weight not less than 10.00 kg/sqm) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing bright finished hard drawn hooks and eyes a with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge .200mm(Two hundred millimeter)

Providing and fixing 115mm (one hundred fifteen millimeter) bright finished brass heaps and stapples (safety type) with necessary screws etc with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 150mm (one hundred fifty millimeter) oxidized M.S. single acting spring hinges with necessary screws etc. complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Applying cement slurry on RCC slab or cement concrete work using 2.75 Kg. of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and laying cement concrete 1:6:12 (1cement : 6sand : 12graded stone aggregate 40mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floors with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge 15mm (Twenty Millimetre) nominal bore

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm(Twenty Millimetre) to 40mm (Forty Millimetre) nominal size bore by providing and fixing tee including cutting and threading the pipes with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing vitreous China wash down, water closet European type. W.C. pan No 200049 in white shade with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) of Parryware/Hindware/Jaguar or its equivalent with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing white plastic seat and cover for wash down water closet with C.P. Brass hinges and rubber buffers of Parryware/Hindware/Jaguar complete with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing PTMT White colour high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern No. 2602 of Parryware/Hindware/Jaguar with fittings with a pair of brackets with fittings such a lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing PTMT jet spray of Cera/Hindware/jaguar with 1.5 mtr. Tube with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing vitreous China wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fittings flat back:-(i) 550mmx400mm (six hundred thirty x four hundred fifty millimetre) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing stainless steel kitchen sink of size 610 x460 x 200 No. 1022 of Paryag Polymers mm of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same (but excluding fitting) of Parryware/Hindware/Jaguar with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 32 mm (thirty two millimetre ) dia diametre C.P brass waste for wash basin or sink of approved brand and menufature with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing M.I. Union for wash basin or sink 32mm (thirty two millimetre ) dia size with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 32 mm (thirty two millimetre ) dia C.P. Bottle Trap for wash basin or sink with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 600mm x 450 mm ( six hundred x four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing C.P. Brass Towel rail No 1581 of Jaguar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600mm x 20mm (six hundred x twenty millimetre) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 600mm x 120 mm (six hundred x one hundred twenty millimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing toilet paper holder No 1533 of Jaguar/ESS-Ess or its equivalent in C P Brass with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing CP brass soap dish of Jaguar or its equivalent with brass bracket fixed on wooden cleat with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass bib tap with Capstan head of Jaguar with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass pillar tap with Capstan head 15 mm dia of Jaguar awith in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing P.V.C. connection with Brass unions 300/450 mm (three hundred/four hundred fifty millimetre) length15 mm(fifteen millimetre) nominal size with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing brass full way valve with wheel with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge 15 mm (fifteen millimetre) nominal bore

Providing and fixing brass ball valve (horizontal plunger type) High pressure with polythene plastic floats 15 mm (fifteen millimetre) nominal bore with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110*90 mm (one hundred ten x ninty millimetre) with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes confirming to ISI -15328 SN8 of Supreme/Fenolex/Kitech marked including fixing with approved adhesive etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete /including fixing with approved adhesive etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC door bend with oval access door insertion rubber washer 3 mm Three millimetre) thick bolts and nuts ISI market complete including fixing with approved adhesive etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC Collar ISI marked including fixing with approved adhesive etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC plain bends ISI marked including fixing with approved adhesive etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing PTMT grating sound of approved quality and collar 100 mm nominal dia. with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres(one thousant litres) net capacity tank with in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge

SANTOSH KUMAR

Ishant Gupta

LABH CHAND