REPAIRS TO OUTDOOR PLAY GROUNDS AND ALLIED WORKS AT NOFRA, NAUSENA BAGH, NAE, MES COMPLEX, INS SARDAR PATEL, NCB AND INAS

Amount

M&L for cement concrete work in pavement Quality Concrete /hard standing of flexural strenght 40 kg/Sqcm in field using 400 Kg of cement per cubic metre,thickness of concrete 20 cm and including formwork all as specified and directed.

M&L for Polythene film, black, 50micron laid in floors complete all as specified and directed.

M &L for Forming 20mm thick expansion joints filled with preformed bitumenous filler and top 30mm primed and sealed with sealing compound, grade 'B', 200 mm thickness complete all as specified and directed.

M&L for forming construction Joints (grade 'B') 30mm deep and 10mm wide, (using diamond cutter) and sealed with polyethylne sealant complying with BS-5212 and priming the sides,provn of closed cell polyethylene line back up rod 12mm dia and applying masking tape on edges of joint to prevent accidental spillage of sealant on top surfaces and to give a neat finish to the sealant applied complete all as specified and directed.

M&L for Forming contraction (Dummy) joint for 65mm deep x 10mm wide, filled with sealing compound, Grade-'B', complete all as specified and directed.

M&L for Finishing surfaces of concrete roads, pavements, by brooming complete all as specified and directed.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling etc. Complete all as specified and directed.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for Squared rubble walling with Porbandar stone masonary in CM 1:6 brought to courses, complete all as specified & directed by Engr-in-charge.

Ditto all as per above item No. 9.00 but except stone complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of Porbandar stone masonary surface in CM 1:4 all as specified & directed by Engr-in-charge.

M & L for two coats of cement paint over chalk whitening primer over preparing surfaces plastered or unplastered complete all as specified & directed by Engr-in-charge.

M & L for preparation of old plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed by Engineer in Charge .

M & L for preparation of old treated steel surfaces of any description (Steel gates , Embedded Angles etc), over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M & L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified.

Dismantling of mild steel work of any description not otherwise provided for all as specified and directed .

M & L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion,Gates , Grating drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specifed and as directed by Engineer in Charge.

M & L for Cement concrete 1:3:6 type C-2 (40mm graded agg) in foundatin filling of post holes ,grils, etc complete all as specifed and as directed by Engineer in Charge.

S & F mild steel round bars 10mm dia, cut to length, hooking ends confirming to Fe-410-W(Gde E-250) quality - A or Fe 290 (Gde - E-165) complete all as spd and directed.

Providing and applying minimum 2.0mm thick retro reflective of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, including cost of material, labour, T&P cleaning the existing surface of all dirt, seals, oil grease and foreign material etc complete as per direction of Engineer-in-Charge and accordance with applicable specifications.

Taking down Existing Steel Gate of Size upto 3 Sqm each pannel and applying greasing , Oiling and alinging with necessary provitions of Cleats , incl Welding works with beading etc Complete repair with Workable Condition and Refixing with Same positions Complete All as spd and Directed By Engineer in Charge. (Note :- Additional Providing steel sections shall be Measured and Paid Separately).

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, compound wall etc.laid dry beded in any mortor complete all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete including removing debries ouside MD land all as specified and directed.

M & L for 50mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection,Floor topping etc , surfaces finished of concrete flooring with brooming complete all as spd u including provision of necessary construction joints filled with bitumen filler etc complete all as directed by Engr-in-Charge

M&L for cement concrete 1:4 :8 type D-2 (40mm graded agg) in foundatin filling and mass concrete.complete all as specifed and as directed by Engineer in Charge.

M & L for Sand filling under paver blocks for cushion Complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment to match, Complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, finished with grey cement and pigment, complete all as directed.

All as per above item No. 28.00 & 29.00 except Interlocking tiles including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge. (Note :- Sand and PCC shall be paid and measured Separtely)

M & L for 100 mm thick cement concrete type B-2 (1:2:4) mix using 20 mm graded stone aggregate as in hard standing

M & L for Mild steel TMT bars 10mm dia and over,cut to length,bent to shape required, including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia. complete all as specified.

M & L for Cover slab for drain in 1:2:4,Type B1 (20mm graded aggregate) set in cement mortar 1:6 complete all as directed by the Engr-in-Charge

S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of fencing wire mesh any typecomplete all as specifed and as directed by Engineer in Charge.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

S&F in repairs precast concrete benches three seater at sides of pathway, open space etc including fixing it in position as required and colouring of concrete benches as required complete in all aspects and as directed by Engr-in-charge.

RUDRAAY CONSTRUCTION (BID ID -3158739)

M/S Rajendra Constructions (BID ID -3160431)

Shree Ashapura Construction Co (BID ID -3159491)

BABUBHAI BHIMABHAI PANDAVADRA (BID ID -3160416)

VIVEK JITENDRABHAI KATAR (BID ID -3159098)

shree chamunda enterprise (BID ID -3159598)

JAY BHARAT METAL SUPPLIERS (BID ID -3159016)