GENERAL Providing MS shutters and hoisting mechanism at Chulanur cross regulator shutters and Kurussi Pampadi off take shutters MP-LBC-Fabrication painting and erection of MS shutters and hoisting mechanism at Chulanur canal CH 12 800 2nos cross

Amount

Taking out the mud debris and cleaning the bay, removing the plastic and bio waste and disposing at a suitable place 50m away from site

OD5629/2022-2023:Taking out the mud debris and cleaning the bay, removing the plastic and bio waste and disposing at a suitable place 50m away from site

DISMANTLING existing shutter and hoisting bridge

OD5631/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight )/ Hoisting unit, Embedded parts, etc. of the same and stacking at a distance of 100 metre including hire of machinery, labour etc. complete as directed by the departmental officer at site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)

DEMOLISHING cement concrete manually, FORM WORK and CONCRETING

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

OD5676/2022-2023:Supply of MS round bar including cost of conveyance charges

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply, fabrication and erection of MS SHUTTERS, SCREW ROD, WORM and PINION, HOISTING BRIDGE, HAND RAILS and its accessories

OD5689/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD5706/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD5713/2022-2023:Supply of MS round bar including cost of conveyance charges

OD5720/2022-2023:Fabrication and supply of Structural steel Canal shutters ( Up to 2 tonne weight ) /Hoisting bridge/ Platform and accessories etc. as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD5729/2022-2023:Providing EN-8 screw rod 7.50 tonne capacity 4.00 M lift screw hoist having one number of EN-8 screw shaft, worm gear units having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance. 1m Screw rod, dia 67mm with single start square thread with head pitch of 12.7mm, root dia 62.3mm EN -8 shaft

OD5730/2022-2023:THREAD LESS portion of the screw rod (per metre rate)

OD5745/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance.

OD5747/2022-2023:Supply of BOLT and NUT up to 300mm Length including cost of conveyance.

OD5748/2022-2023:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

OD5749/2022-2023:SUPPLYING & STACKING of Dia 32 mm G.I. PIPE

OD5750/2022-2023:SUPPLYING & FIXING of TOWER BOLT

OD5751/2022-2023:BUTT HINGE

OD5752/2022-2023:SUPPLYING and STACKING of PAD LOCK.

OD5753/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting bridge/ Platform including hand rails, ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges etc. complete but excluding cost of materials already supplied

PAINTING all the surfaces of the EMBEDDED PARTS, SHUTTER and HOISTING BRIDGE with EPOXY coal tar black.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

ASHIFUL HAK.C

JOBIN JOSEPH

Bidder Name

ASHIFUL HAK.C

PEETHAMBARAN

JOBIN JOSEPH