Renovation/Repairs of old Circuit House, Additional Circuit House, New Circuit House, kitchen, construction of ramp and supplying conference table etc, at Kokrajhar Circuit House. Package No.504_2

Amount

(A) Renovation/Repairs old Circuit House: a) Removing white or colour wash by steel wire brushing and/or scraping sand papering and preparing the wall surface smooth including necessary repairs to ..….

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting make of Berger paint of required shade after cleaning the surface etc.including scaffolding complete as directed at all levels (two coats)

Removing dry and oil bound by washing and scraping and scraping and sand papering the wall surface smooth including necessary repair to scratches complete. (a) Out side wall surface.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ICI paint/J & N paint/Nerolac) on new surface to give an even shade.................smooth.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and........... manufacture stopping. Surfaces over girth. (c) With Apeolite.

Varnishing two coat (excluding priming coat) on new wood and wood based surfaces under coating with flatting varnish and finishing coat with copal varnish or spar varnish to give an even........................ surface. (i) Surface over 100mm.

Providing barge board of size 200mm x 20mm with 1st class local Hollock/Bonsum timber including fitting and fixing with necessary wood screws etc complete.

15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises, internal rounded angles, not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A) On fair side (b) In cement mortar 1:4

Providing fitting and fixing full paneled doors/windows including oxidized M.S but hings (100mm x 75mm x 3.55mm) with necessary screws (other fittings to be and paid separately) (B) With 1st class local wood (Gamari/Hollock) (ii) 35mm thick.

Providing fitting and fixing fully galzed window with sasth bars including oxidized M.S. Butt hinges (75mm x 60mm x 3.15) 2 nos. On each leaf and 3 nos. on complete leaf (glas panes to be measured and paid separately) (B) With Gamari wood. (ii) 35mm thick.

Providing, fitting and fixing wire gauge shutters using galvd. M.S. Wire M.S. Designation 85G with wire of dia 0.56 mm for doors, windows and clerestory windows including oxidised M.S. Butt hinges (100 mm x 58 mm x 1.90mm) (A) with gamari (iii) 35mm thick.

Providing and fixing clear sheet glass beded in putty and fixed with/wiithout wooden bidings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately). 2) Area of glass panes not exceeding 0.15 m2 © 3.00mm thick

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. b) Tower bolts iii) 200mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. c) Door handles iiii) 150mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. d) Gate shutter hooks & eys iii) 150mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. e) Mortice Lockes vertical type iii) 100mm godrej.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material.....................department. Thickness= 1.5mm thick

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing and application of insultech safeguard coating for head reflecting and waterproofing of approved colour as per direction of engineer in charge.

Painting two coat on new G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over5 GCI sheets to give and even shade including the cleaning the rust patches..............complete.

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet P Trap.

Supplying fiting and fixing PVC flushing cistern with all internal fitting with CI brackets including fitting and fixing................. Specified. I) parryware make a) White (i) Deluxe Single Flush.

Providing fitting and fixing victreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader............. required. (a) White (i) New Magnum

Providing victreous China wash basin with CI/MS brackets, C.P brass chain with plug.PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. a) White (i) Star basis.

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 450mm x 600mm

Providing, fitting and fixing CP towel rail complete as directed and specified. (i) Continental 300mm

Providing, fitting and fixing Chrome Plated toilet raper holder complete as directed and specified. (a) Agmeco make (ii) Legend

Supplying, fitting and fixing PVC pipe..............specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipe..............specified. (a) In exposed surfaces or in trenches. (i) 175mm dia.

Supplying fitting and fixing chrome plated (C.P) stop-cock of specified brand and size mentioned below as directed and specified.................separately. (i) Jaquar make (a) Queen colleter (ii) CP 2 way

Supplying and fitting gun metal country pit valve (full way valve) ISI Make as specified and directed. (b) 40mm dia.

Supplying and fitting gun metal country pit valve (full way valve) ISI Make as specified and directed. (c) 25mm dia.

Supplying fitting C.P. Pillar cock of 15mm dia of approved brand is specified and directed. (vi) Mare brand (a) Pillar cock series.

Supplying fitting and fixing chrome plated (C.P) stop-cock of specified brand and size mentioned below as directed and specified.................separately. (i) Sona brand (a) Ange stop-cock 15mm dia

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) (II) ESSCo make (iv) Lauret make.

Supplying fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. (a) Payemtn make (d) Wall mixture-3 in 1 system.

Providing fitting and fixing CP soap tray/soap dish complete as directed as specified. (a) Jaquare make (b) Queen

Providing 3 layers fusion welded RRR pipe.....damages. (i) Cencealed pipe with cutting ..........walls. (a) 20 mm dia.

(B) Renovation/Repairs to Additional Circuit house RCC Building two storied/Old : a) Removing white or colour wash by steel wire brushing and/or scraping sand papering and preparing the wall surface smooth including necessary repairs to ..….

Removing dry and oil bound by washing and scraping and scraping and sand papering the wall surface smooth including necessary repair to scratches complete. (a) Out side wall surface.

Finishing wall with two coats of acrylic emulsion exterior coating of unisem "Rokshak" brand of required shade by thinning 1 ltr. of paint with 750 ml of water give an even shade after throughly brooming the surfaces to remove all dirt and remains of these powdered materials as specified and directed by the department.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ICI paint/J & N paint/Nerolac) on new surface to give an even shade.................smooth.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and........... manufacture stopping. Surfaces over girth. (a) High gloss (asian paint)

Providing fitting and fixing full paneled doors/windows including oxidized M.S but hings (100mm x 75mm x 3.55mm) with necessary screws (other fittings to be and paid separately) (B) With 1st class local wood (Gamari/Hollock) (ii) 35mm thick.

Providing fitting and fixing fully galzed window with sasth bars including oxidized M.S. Butt hinges (75mm x 60mm x 3.15) 2 nos. On each leaf and 3 nos. on complete leaf (glas panes to be measured and paid separately) (B) With Gamari wood. (ii) 300mm thick.

Providing fitting and fixing fully galzed window with sasth bars including oxidized M.S. Butt hinges (75mm x 60mm x 3.15) 2 nos. On each leaf and 3 nos. on complete leaf (glas panes to be measured and paid separately) (B) With Gamari wood. (ii) 35mm thick.

Supplying, fitting and fixing pelmet to door and window frames with 12 mm thick kit ply wood finished with matt finished sunmica on external faces and bottom masonary socket and clamps complete including inside painting as directed. (a) Without Sunmica.

Providing and fixing clear sheet glass beded in putty and fixed with/wiithout wooden bidings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately). 2) Area of glass panes not exceeding 0.15 m2 © 3.00mm thick

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. b) Tower bolts iii) 200mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. c) Door handles iiii) 150mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. d) Gate shutter hooks & eys iii) 150mm

Providing, fitting and fixing Door closer of various type UL listed and ...........quality depencing on the door specification. Types like single speed, Double speed, Heavy Duty etc. are available and as directed & specified by the department. (A) Heavy duty Door closed (size 180 mm x 65mm x 64mm)

Providing, fitting and fixing wire gauge shutters using galvd. M.S. Wire M.S. Designation 85G with wire of dia 0.56 mm for doors, windows and clerestory windows including oxidised M.S. Butt hinges (100 mm x 58 mm x 1.90mm) (A) with gamari (iii) 35mm thick.

Providing fitting and fixing fly-prrof galvd. M.S. Wire gauge of I.S. Designation 85 g with wire of dia. Of 0.56 mm to windows and clerestory windows including timber beading of size 50 mm x 20 mm complete. A) With 1st class local timber bead

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning otl grease. Dirt and other foreign matter sand papering and knottine. (b) With ready mixed paint wood primer (pink)

Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Demolishing skirting/dado in wall/RCC and PCC members without causing any damaged to the wall/member upto any height including disposal of debris as directed for all levels.

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary...........................department. i) Of size 300mm x 450mm

Providing vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of step river 15mm..................................department. (b) Executive Range. (i) Somany/Orient/Nitco make. i) Of size 800mm x 800mm

Providing Transporting to site laying fitting and fixing at all levels tiles for following purpose of SUNROCK-HI-CTS tiles of high density cement concrete designer coloured tiles made of 100% pure white cement tested thickness 5mm to 50mm to be anored adhesive...........department.

Providing Antiskid tiles of approved quality size, shape not less than of thick................directed. 2. VITREFIED (iii) Executive range nitco make

Providing polished granite slab of approved quality, size, shape and skirteess not less than 18mm on floors, skirtings, treads and risers of steps over cement star bed 15mm thick in prop.1:3 (1 cement : 3 coarse sand) including cutting where .....finished with flush pointing with.................separately).

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and............department.

Providing plinth protection 50 mm thick to cement concrete 1:3 with stone agg. Of 20 mm nominal size including finishing the surface with 10 mm thick cement plaster in proporation 1:3 with a floating coat of net cement finished.

Providing and application of insultech safeguard coating for head reflecting and waterproofing of approved colour as per direction of engineer in charge.

15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises, internal rounded angles, not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A) On fair side (b) In cement mortar 1:4

Providing vitreous china wash basin of size 550mm x 400mm of hindware make....required. 1.13.1 Pdestal Basin (A) Parryware make (ii) Cascode NXT 550 x 440 mm

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 450mm x 600mm

Clearing of service septic tank and removing the night soil and debris etc. by manually from the tank/chamber to a distant to a distant place preferably at holiday or at night by...............department. (b) Considering 1 No. of septic tank for 100 users.

Construction of filter bed soak pit including earth work in exacavation of soil and then filling up of the trench with brickbats/Charcoal covered with earth over a layer of A.C.plain sheet..............table.

Providing fitting and fixing vitreous china pedestal type as directed specified. A) Parryware make a) White

Supplying fiting and fixing PVC flushing cistern with all internal fitting with CI brackets including fitting and fixing standard size CP flush pipe, union ... I) parryware make a) White (i) Deluxe Single Flush.

Providing, fitting and fixing CP soap tray/ soap dish complete as directed and specified. (I) Jaquare Make (b) Queen.

Providing, fitting and fixing CP towel rail complete as directed and specified. (i) Continental 300mm

Supplying, fitting and fixing G.I pipes of follow sizes, with all necessary R brand or similar approved G.I Fitings such as bend,tee.elbow,reducer,nipple,plug,..............specified. (A) In Exposed or in trenches. b) 40mm dia i) Using Tata (medium)

Supplying, fitting and fixing G.I pipes of follow sizes, with all necessary R brand or similar approved G.I Fitings such as bend,tee.elbow,reducer,nipple,plug,..............specified. (A) In Exposed or in trenches. c) 25mm dia

Concealed by chiselling or breaking brick wall...................structure. b) 25mm dia i) Using Tata (Medium)

Concealed by chiselling or breaking brick wall...................structure. c) 15mm dia i) Using Tata (Medium)

Providing, fitting and fixing Chrome Plated toilet raper holder complete as directed and specified. (a) Agmeco make (ii) Legend

Supplying fitting and fixing PVC pipes of 6 Kg/cm2 (supremo/prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary.................specified. ii) 110mm dia.

Supplying fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. (a) Lauret make. (d) Wall mixer 3 in 1 system with provision for both telephonic shower and overhaed shower complete with 115mm long bend pipe cat no.1119

Supplying fitting C.P. Bib cock 15 mm dia. Of approved brand directed and specified (G.I. & C.P) pipes will measured separately) (i) Jaquar make (a) Queen colleter (ii) CP 2 way bib cock flange.

Supplying fitting and fixing chrome plated (C.P) stop-cock of approved brand and size mentioned below as directed and specifiied........separately. (ii) Jaquare (a) Continental (i) 15 mm dia.

Supplying and fitting gun metal country pit value (full way value) ISI Make as specified and directed. c) 25mm dia.

Supplying and fitting gun metal country pit value (full way value) ISI Make as specified and directed. e) 25mm dia.

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) (II) ESSCo make (iv) Lauret make.

Supplying fitting C.P. Pillar cock of 15mm dia of approved brand is specified and directed. (vi) Mare brand (a) Pillar cock series.

Supplying fitting and fixing chrome plate (C.P) basin mixer complete as directed. (i) Crabtree Fretting make. (a) Florence. (i) Central hole basin mixer without popo-up Cat.No.21051.

(C) Repairs to New Circuit house (RCC two storied): a) Removing white or colour wash by steel wire brushing and/or scraping sand papering and preparing the wall surface smooth including necessary repairs to ..….

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ICI paint/J & N paint/Nerolac) on new surface to give an even shade.................smooth.

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting make of Berger paint of required shade after cleaning the surface etc.including scaffolding complete as directed at all levels (two coats)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and........... manufacture stopping. Surfaces over girth. (b) High gloss (Asian paint)

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material.....................department. Thickness= 1.5mm thick

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels.

Dismantling all types of celling, partition and wall lining and stacking the materials as directed by the department for all levels.

Grading roof water proofing treatment with. (i) cement concrete 1:2:4

Providing and application of insultech safeguard coating for head reflecting and waterproofing of approved colour as per direction of engineer in charge.

Supplying fitting fixing and painting where necessary...........directed. 14.5 mm MPL

Providing polished granite slab of approved quality, size, shape and skirteess not less than 18mm on floors, skirtings, treads and risers of steps over cement star bed 15mm thick in prop.1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with-A-Tile Choksey/Sika/Pedelite/Rouf)/white cemet slurry..............directed. (ii) Deluxe quality (ii) With white cement.

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary...........................department. i) Of size 300mm x 450mm

Painting two coat on new G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over GCI sheets to give and even shade including the cleaning the rust patches..............complete.

Providing, fitting and fixing godrej S.S. 304 grade railing with pipes..............railing.

Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop 1:2 with a floating coat of neat cement finish.

Providing and fixing clear sheet glass beded in putty and fixing with/wiithout wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately). (I) Area of glass panes. © 3.00mm thick

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet P Trap

Supplying fiting and fixing PVC flushing cistern with all internal fitting with CI brackets including fitting and fixing................. Specified. I) parryware make a) White (i) Deluxe Single Flush.

Providing fitting and fixing victreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader............. required. (a) White (i) New Magnum

Providing victreous China wash basin with CI/MS brackets, C.P brass chain with plug.PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. a) White (i) Star basis.

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 450mm x 600mm

Providing, fitting and fixing CP towel rail complete as directed and specified. (i) Continental 300mm

Providing, fitting and fixing Chrome Plated toilet raper holder complete as directed and specified. (a) Agmeco make (ii) Legend

Supplying, fitting and fixing PVC pipe..............specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Construction of filter bed soak pit including earth work in exacavation of soil and then filling up of the trench with brickbats/Charcoal covered with earth over a layer of A.C.plain sheet..............table.

Supplying fitting and fixing chrome plated (C.P) stop-cock of specified brand and size mentioned below as directed and specified.................separately. (i) Jaquar make (a) Queen colleter (ii) CP 2 way bib cock flange.

Supplying and fitting gun metal country pit valve (full way valve) ISI Make as specified and directed. (c) 25mm dia.

Supplying fitting C.P. Pillar cock of 15mm dia of approved brand is specified and directed. (vi) Mare brand (a) Pillar cock series.

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately) (II) ESSCo make (iv) Lauret make.

Supplying fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. (a) Payemtn make (d) Wall mixture-3 in 1 system.

Providing fitting and fixing CP soap tray/soap dish complete as directed as specified. (a) Jaquare make (b) Queen

Providing and fixing 3 layers fusion welded RRR pipe.....damages. (i) Cencealed pipe with cutting ..........walls. (a) 20 mm dia.

(D) Construction of Kitchen : Providing barge board of size 200mm x 20mm with 1st class local Hollock/Bonsum timber including fitting and fixing with necessary wood screws etc complete.

Providing fitting and fixing 1st class local wood battend, ledged and braced door and window shutter including oxidized iron butt hinges (100mm x 58mm x 90mm) 6 nos with necessary screws. (i) 25mm thick

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc.complete. a) Sliding door bolt (i) 300mm x 16mm……….

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc.complete. b) Tower bolts (i) 200mm x 12mm……….

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc.complete. c) Door handles (iii) 150mm

(a) Applying one coat of cement primer of approved brand and manufacture on wall surface after thoroughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Finishing wall with two coats of acrylic emulsion exterior coating of unisem "Rokshak" brand of required shade by thinning 1 ltr. of paint with 750 ml of water give an even shade after throughly brooming the surfaces to remove all dirt and remains of these powdered materials as specified and directed by the department.

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning otl grease. Dirt and other foreign matter sand papering and knottine. (b) With ready mixed paint wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and........... manufacture stopping. Surfaces over....... girth. (b) High gloss (asian paint)

Applying mordant solution of approved brand and manufacture on new G.I. Sheet for preparation of surfaces for painting @5.00 litre/100 sq. Metre of surface and ...........the solution with brush including throughly cleaning the surface of oil, grease, dirt and other foreign matter.

Painting two coat on new G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over GCI sheets to give and even shade including the cleaning the rust patches with emery paper, dust, dirt, grease and other foreign matter with water complete.

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing fitting & fixing stainless steel kitchen sink parryware make with CI/MS brackets, C.P brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately.

Supplying, fitting and fixing G.I pipes of follow sizes,with all necessary R brand or similar approved G.I Fitings such as bend,tee.elbow,reducer,nipple,plug,long screw fitting , H.W clams etc. complete at all levels including below G.L as directed and specified.

Supplying fitting and fixing C.P. Bib cock 15 mm dia of approved and directed and specified. (G.I. & C.P. Pipes will be measured separately). (i) Essco make. Two way long body bib cock.

Supplying fitting and fixing chrome plated (C.P) stop-cock of specified brand and size mentioned below as directed and specified.(G.I. & C.P.) pipes will be measured and paid separately.. (i) Jaquare (a) Continental (v) 15mm dia

(E) Construction of Ramp : Earth work in excavation in foundation trenches of walls, retaining walls. footing of colums,steps and septic tank etc. including refiling (return filling) the quantity as necessary...............as spedified. (A) Up to depth of 2.0 m below the existing Ground level. (a) In Ordinary Soil.

Demolishing Stone rubble masonary including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales...................and unloading. (C) With river sand.............unloading.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps,walls,brick works etc. as directed and specified. ..............complete. (b) In prop 1:3:6

Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary and curing etc. complete. B) 50mm thick

Providing laying plain/reinforced cement concrete works with cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforced for reinforce cement concrete work. (i) Using Mixture machine (a) In Sub-Structure up to plinth level (i) Foundation fottings.............. M-15

Providing form work of 12mm thick plywood board so as to give a rough finish including centering,shuttering, strutting and propping etc.height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.1 Column, pillar, post.......... face.

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure of the plinth level. (I) In super structure up to plinth level including dewatering if necessary.

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick flat soling.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per.............etc. complete. a (II) Super Ductile TMT

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In prop. 1:4

25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing etc. complete as directed.

Providing vitrified floor tiles approved quality of specified size shape and thickness not less than 18mm on floors skritings rises and treads of steps over 15mm.........department. A) Normal Range. Somany....... make. (i) of Size 600mm x 600mm

Providing antiskid tiles of approved quality size, shape not less than 8mm thick.............directed. (B) VITRIFIED (i) Normal range (Size 300mm x 300mm and above) Somany..............Tiles. (b) Deluxe

Providing, fitting and fixing godrej S.S. 304 grade railing with pipes..............railing. (a) S.S. Railing steel with..........

(F) Providing conference table with chair etc for new Circuit house: Providing fitting and fixing of Conference Table of U Shaped of length 15.30m framing with 19mm & 12mm thick water proof. The top and vertical faces of table is finished with Korean of 12mm & 6mm thick as per specification and as directed.

Providing and placing C at Godrej make Executive chair La sede conference room high back or equivalent of wipro/featherlite make of size 750mm x 780mm x 1010mm for seating as specified and directed by the department.

Providing and placing C at Godrej make Executive chair Marvel or equivalent of wipro/featherlite make of size 750mm x 780mm x 1010mm for seating as specified and directed by the department.

Providing and placing C at Godrej make one seater Pisa sofa or equivalent of wipro/featherlite make with overall dimension 930mm x 850mm x 890mm for seat height of 420mm as specified and directed by the department.

Providing and placing at site Godrej make two seater Midas sofa or equivalent of wipro/featherlite make with merges aesthetic and roboust design using a combination of steel and molded foam to provide durable and highly comfortable seating as specified and directed by the department.

Providing and placing at site Godrej make centre table Bloom or 18 equivalent of wipro/featherlite make with glass top of size 1000mm x 600mm x 428mm as specified and directed by the department.

DHARAMSING NARZARY

M/S. S.L. ENTERPRISE