COMPREHENSIVE BR REPAIR TO OTM ACCN OF SOUTHERN GARRISON INCLUDING ROAD SIDE BERMS PATH CULVERT AND OTHER MISC WORKS AT SUNDERBANI UNDER GE NORTH AKHNOOR

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling of mass concrete etc complete all as specified and directed.

Machine pressed concrete interlocking paver block any shape, colour and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 30mm thick (average) sand cushion complete all as specified.

Machine pressed concrete interlocking paver block any shape, colour and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment over 30mm thick (average) sand cushion complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as spfd and directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor and finished even and smooth, with using extra cement complete all as specified.

M&L Rendering 15 mm thick in CM 1:4 set as in screed bed or bedding layer for laying floor finishes.

M&L Chequerred cement concrete tiles 30 cm x 30 cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified .

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Ditto all as per item No 10 but except brick.

Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified.

M&L for walling of random rubble masonary uncoursed well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified

Ditto all as per item No 13 but except stone.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses. Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm

M&L for raised pointing to random rubble masonry uncoursed or brought upto course in CM 1:4.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

Extra for forming fair finished channel or drain 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc complete all as specified.

Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates as in cills,lintels upto 1.50 metre clear span , copings etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works, all as specified.

S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints "fixed to wall/laid in trenches or in floors", complete all as specified.

S&F PVC (SWR) bend/shoe any radius 110 mm bore fixed to rain water pipe all as specified

M&L for Preparation of new treated surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed and other surfaces with alkali resistant priming paint.

M&L for preparation of old treated surfaces of walls and applying one coat of cement base paint complete all as specified

S&F for two way reflective road stud (SOLAR STUD)of size 125 mm x 125mm x 25 mm alluminium alloy pressure die cast body, model No OS 809 (OSCAR) with reflective panel - Amber /Red/White(CAT EYE) in built 2 nos. holes and installation with Epoxy and specially design nails approved by the Engineer In Charge all as specified and directed . Make :- OSCAR, DARK EYE /Birla 3-M or equivalent as approved by the GE. Note:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to install the road stud .

S&F in repairs of solar flasher /delineator pole mounting with protective cover and pole made of Aluminium and poly carbonate powder coated MS Pipe 50 mm dia ,height 1000 mm base size in mm 75x80 Model No AK - 967 AKTION fixed on the ground after necessary excavation and earth work in any type of soil and embedding the delinators on the ground with and including PCC (1:2:4) type B-I using 20 mm graded stone aggregate (min PCC block size 200mmx200mmx200mm ) for proper grouting complete all as specified and directed Make AKTION/Road Star or equivalent Model of other make as approved by GE.

Dismantling posts or structs (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brickwork, masonry etc., complete all as specified & directed.

Excavation in post holes (or similar holes) in any type of soil, each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified.

Removing of surplus soil excavated materials to a distance exceeding 50m but not exc 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Mild steel work in posts & struts in fencing including cutting tops to shape as directed including drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc), necessary drilling, bolting or riveting, conforming to Fe-290 grade E-165, complete all as specified & directed. Note : Unit rate shall deemed to include locking holes after fixing of barbed wire and welding to bent up portion as directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation complete all as specified and directed.

S&F Mild steel flat iron work as in bands, staps supports or stays for rain water ventilating pipes, including bolts, if required hooks, heay, for large gates hook and pintel hinges plain angle cheats conforming to Fe-290 grade E-165, complete all as specified & directed.

Supply only chain link MS galvanized fencing of oblong wire mesh size 100x100mm with weight not less than 3.9 Kg/Sqm all as specified and directed. (Note- Dia of main bar should be 4mm and cross bar 4mm)

Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails straining bolts etc including provision of binding wire and fixing with MS angle iron fencing posts complete all as directed by Engr-in-Charge.

S&F MS TMT Bars , 10mm dia over cut to length , bent to shape reqd including cranking bending and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to grade FE-410 all as specified .

S & F MS screw bolts (machine made ) with hexagonal or square head at one end and other screwed the other , each screwed end to be fitted with washers and nut,exc 5cm but nexc 10 cm long & dia 11 to 15mm.

Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to mild steel fencing posts, any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel nibs, pins complete all as specified and as directed. Note : Each line of barbed wire to be measured seperately.

M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth, priming with red oxide zinc chrome primer and painting with two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for forming emabankments including raising (or lowering) earth, spreading in layers n exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape etc n exc. 1.5 high from base. Note : Earth shall be brought from out side of Defence land all as specified and directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimeter in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less all as specified and directed.

M&L for continuous brick edging; with width equal to the width of the brick; laid dry on end vertically all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Gde-E 165-0

M&L 600mm reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and directed.

Taking down cement plaster from brick or stone or concrete wall surface etc. including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M&L for rendering 10 mm thick rendering in cement and sand mortar 1:3 on concrete surfaces as in chaja/facia, including finishing even and smooth without using extra cement complete all as specified.

M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required all as specified and directed.

Roughening surfaces of old concrete floors by picking sweeping clean and washing down with water to remove dust.

M&L for Glazed ceramic coloured tiles, (300x200 mm) x 7 mm thick as in skirting/dado over & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:3 on fair faces of brick work /concrete surfaces as in backing coat for receiving wall tile complete all as specified.

M&L for Non skid ceramic coloured jointless tiles 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm, but not exceeding 0.11 Sqm, in floors of outdoors/parking, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified & directed

M&L for Non skid ceramic coloured jointless tiles 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm, but not exceeding 0.38 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

Ditto all as per item No 51 here-in-above but as in skirting.

M&L for 15 mm thick screed bed or bedding layer in CM 1:4 set as for laying floor finishes.

M&L for applying two coats of distemper oil emulstion and walls including preparation on one coat of chalk whiting on new plastered surfaces complete all as specified and directed.

M&L for preparation new decorated surfaces of walls and applying two coat of cement base paint over one coat of with alkali resistant priming paint all as specified.

Taking down frames with shutter any description exc 1.5 sqm and n.exc 4.0 sqm each complete all as specified and dircted.

Taking down frames with shutter any description n.exc 1.5sqm each complete all as specified and dircted.

Taking down shutters of any dscription exc 1 sqm but n.exc 2 sqm each

Refixing the shutters area exceeding 1 sqm and not exceeding 2.00 sqm each in the same opening complete all as specified

M&L for pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm including tarring ends and back of chowkats and lugs complete all as specified and directed

Ditto all as per item No 60 here-in-above but size 125 mm x 60 mm.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (of two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated and fitted to chowkats all as specified and directed.

All as per item No 62 above but glazed and skeleton shutter with sash bar for glass / wire gauge.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel door frame/ hold fast complete all as specified

M&L for steel windows or ventilators,fixed type(box type) factory made with double shutter(wire gaugeed shutter and glass/glazzed shutter,wire cloth and glass pane shall be measured and paid separately of size 79mmx39mm,16 gauge rectangular tubular frame with side hung.)with glazing bars,including a shop coat red oxide of zinc chrome primer, all as specified.

All as per item No 65 above but without glazing bar.

S&F IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified.

S&F Double action floor spring hydraulically regulated made of minimum 1.25mm thickness aluminium alloy fixed under the alluminium doors complete all as specified.

S&F Aluminium Hydraulic door closer, regulated universal type suitable for doors of any description complete all as specified and directed by Engr-in-Charge.

S&F in repairs 150mm helical door spring including roller and roller plate (mild steel) necessary welding to steel frames complete all as specified.

S&F mild steel cold rolled parliament hinges medium weight 100 mm long complete all as specified.

S&F mild steel barrel tower bolts stove enameled black with bright both 150 mm long

S&F Mild steel pressed handle 150mm long oval typestove enameled black complete all as specified and as directed.

S&F Mild steel sliding door bolt 300mm long plate type stove enamel black with bright bolt n.less than 12mm dia with and including minimum 6 bolts and nuts four on staple plate complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodized, of 150 mm complete.

S&F Aluminium anodized barrel tower bolt of extruded section and fixed of 150 mm length of bolt complete.

S&F Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) 300 mm long, and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F Floor door stopper of aluminium alloy body and tenque anodised with hard drawn steel spring fixed in floor 150mm long.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square /ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified

Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

Taking up or down 15mm bore steel tubing and connections, complete cleaning including repairing and refixing in the same position as directed by Engr-in charge.

Ditto all as per item No 86 here-in-above but 20mm bore pipe.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. of 15mm bore all as specified.

Ditto all as per item No 88 here-in-above but 20mm bore pipe.

Demolition of reinforced cement concrete of any description and in any position complete all as specified .

M&L for reinforced cement concrete (Nominal mix), type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer -in-Charge.

S&F mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .

S&F in repairs vitreous china wash basin FULL PEDESTAL with fixing accessories and accessories set, size 505x410x185 mm including cutting for and pinning ends of brackets complete all as specified and directed.(Make Aspire/Jaquar or equivalent part no. : AIS-WHT-101301 & AIS-WHT-101301)

S&F for fancy European type bowl with cistern for coupled WC with PP normal close slim cover,hinges,fixing accessories and accessories set ,size 395x680x775,S-trap-220mm and connecting to drain or out going pipe with outlets etc compelte fixed in repair. (Make : Aspire/Jaquar or equivalent Part no : AIS-WHT-101851S220NPPSM.)

S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified.

S&F Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified.

S&F PVC valve less syphonic action type flushing cistern 10 Ltr capacity low lavel coloured with inlet ball valve float and handel brackets all as fixed in repair.

S&F in repair 15 mm bore CP stop valves fancy type, cast copper alloy with crutch or butter fly handle, high pressure, screwed down, screwed both ends for iron pipe or for brass ferrule all as specified fixed in repairs.

S&F CP Swivel shower rose of PTMT any colour for fixing with 15mm pipe complete all as specified and directed. (Minium weight 40gms).

S&F Bib taps, cast fancy type , chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S&F Pillar taps, cast copper alloy, fency type chromium plated, with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs.

M&L for preparation and brooming down of old decorated plastered or unplastered surfaces of walls including cornice etc and applying one coat of white wash on walls complete all as specified and directed.

Ditto all as per item No 103 here-in-above but on ceiling.

M&L for washing, rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion to walls complete all as specified and directed.

Description all as per item No 105 above but two coats on wall.

Description all as per item No 105 above but two coats of Birla wall care putty.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for brushing cleaned surface with neat cement slurry with 3.0Kg of cement per sqm all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof padding in slope, finishing the surface even & smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.

Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 4.0 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membrane.(c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrance and dusted with dry sand @ 0.50 to 1 Kg/sqm dusted over bitumen coat. Note : (i) Roof treatment work shall be carried out through approved manufacturers only.(ii) If Non-accesible roof : After providing (a) to (c) provide aluminium paint as per manufacturer instructions.(iii) Covered fillet in PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of required radius shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6).

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F PVC wall lining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet filet of width 35mm to make PVC frame as per manufacturers and drawings including taking down existing wall lining and panelling.

Dismantling fencing/wire mesh not exc 4 kg/Sqm

M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, as in sub base of floor complete all as specified and as directed by Engineer-in-charge. (Note for Srl Item No 1 to 120 : Pl note that in case of any difference in quoted rate for similar item in BOQ then lowest of the rate quoted for similar item shall be considered).

M/s Mool Raj Romesh Chander

M/S K K ENTERPRISES

NATIONAL TRADING COMPANY