PROVN OF RAIN WATER HARVESTING, PROVN OF CAR PARKING SHED AT BLDG NO P-32/01 AND SPL REP OF 02 NOS TOILET AND 01 URINAL FOR GD POST AT 119 (I) BDE CAMP AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Earhwork in Excavation by mechanical means over area exceeding 30 cm in depth 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavation earth lead upto 50 m and lift upto 1.5 m complete all as specified and directed.

Surface excavation including cuttinng bushes, grass and levelling and surface clearance not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, ®complete all as specified and as directed

M&L for PCC 1:4:8 type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F MS angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and as directed.

S&F 5 to 10mm diameter of neck mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square washers and one nut length of bolt exc 10cm and n. exc. 15 cm long, complete all as specified and directed.

Supply only 10mm dia & over mild steel round/TMT bar conforming to Fe-410 or Fe-310-0 as in tie bars for chain link fencing including necessary fabrication, cutting to length bending to shape as required, etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

Supply only for Chain link mild steel galvanised fencing of any size straining boldts etc rails & binding wire complete.

M&L for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured)

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on newly untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on newly untreated steel surfaces of any description, not over 10cm in width or girth,not otherwise described including preparation of surfaces complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

Removing excavated material (disintegrated rocks) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

S&F for steel work as in tubelar truss incl special shaped washer etc complete using erw or induction butt weld ed tubes ,including gusset plate pole etc . all as specified and directed.

S & F Fe 410-W (Gde -E-250) quality-A plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc.

Supply & fix purpose made crew bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 16-20 mm dia and exc. 22cm and nexc. 30 cm long complete all as specified and as directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

M & L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in Sub base.

S&F coloured machine pressed precast concrete Cobble stone any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and direceted.

M & L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of walls, concrete etc finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing plastered or un-plasteredold surfaces of wall and applying one coat of white wash complete all as specified & directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:6, including finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in base, surface channels and drains complete as specified and directed.

M & L PCC Type B1 1:2:4 (20 mm graded stone aggregate ) as in coping ,side kerbs etc complete all as specified and as directed .

M&L for Cement Concrete 1:3:6 type C-2 used bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 300mm dia RCC pipe complete omplete.

M&L for Reinforced concrete pipe300 mm dia (internal dia) Class NP-2 laid and jointed complete with collars complete.

M&L for RCC (Nominal Mix) type B0 1:2:4 (12.5mm graded ) for walls , retaining walls , basement walls , ballast wall and the like any thickness ,above top of footin g including attached pilaster and buttresses.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Form work to faces of walls, retaining walls , abutment s parapet and staircase railing s and similar work including buttresses etc vertical or to botter etc complete all as specified and directed.

M&L for PVC pipe 75mm dia for as in weep holes all as specified and directed.

Excavation over areas, n. exc 1.5 mtr deep and getting out in soft and loose soil complete all as specified and directred.

Excavation over areas, exc 1.5 mtr , but n.exc 3mtr deep and getting out in soft and loose soil complete all as specified and as directed.

M & L for 150th PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in floors etc finished even and smooth without using extra cement complete all as specified and as directed.

M & L in broken bricks hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6)complete all as specified.

M & L broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage well

M & L RCC 1:2:4 Type B1 (using 20mm graded stone aggregates) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L PCC 1:2:4 Type B1 (using 20mm graded stone aggregates) for PCC Band in fillings and mass concrete complete all as specified and as directed.

M & L for TMT Mild steel bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M& L for providing precast cement concrete PCC 1:2:4 type B1 (20mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M & L for Plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides of bore pipes after the pipe are laid and tested for 200mm complete all as specified and directed by Engineer-in-Charge.

M&L for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed .

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete

S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed

S&F 110 mm dia HDPE pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete

S&F HDPE bends 110 mm bore with or with out oval excess door complete all as specified and as directed

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each.

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match including dismantling complete all as specified and directed

M&L Glazed coloured ceramic tiles 600 x 300 x 7 mm to 8 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles over and including 10mm thick in CM (1:4) on brick or concrete surfaces of finished rough to receive the glazed tiles . including dismantling of exixting tiles of any description or thickness in walls all as specified and directed by engg-in-charge

M&L for 5 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M&L for applying two coat OBD on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

S&F 4mm thick sheet glassFigured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing 30 mm thick Glass Fibree Reinforced Plastic (F.R.P.) panelled door shutter of required colour and approved brand and manufacture ,made with fire -retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings ,cast monolithically with 5mm thick FRP laminate for panels conforming to IS : 14856 , including fixing to frames , complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F Fiiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness .The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs . the frame shall be covered with fibrer glass from all sides M.S. stay shall be provided at the bottom to steady the frame , complete as specified by the manufacturer and as per directions of Engr-in-charge.

S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.

S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

M&L for 18 to 20 mm thick Green Marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding exposed edges including dismantling existing stone complete all as specified and as directed.

S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs Stop valves/ Angle valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

Supply & Fix in repair Plantex Ceramic table top wash basin oval shape, size 420 x342x177 mm including PVC waste pipe and waste coupling fixed complete all as specified and directed.

Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repair 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed

S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed

S & F (in repair) vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe complete all as specified & directed.

Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.

S&F in repair Gloxi stainless steel folding 24 600 mm long towel rack for bathroom durable , stylish , space saving towel holder & stand - perfect bathroom accessories set for home (chrome , foldable ) complete all as specified and directed

S&F in repair chromium plated brass Peg set of Six fixed with brass screw and wooden /plastic cleats.

Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required connections complete complete all as specified and directed

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required connections complete complete all as specified and directed

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed.

Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed.

S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S &F PVC (SWR) 75 mm dia vent cowl

S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

S&F Anodised aluminium frame and shutter for doors and frame for windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron)

S&F Sheet glass, ordinary quality and glazing with oil putty/ wooden beading/ or aluminium bidding in square/rectangular in each pane 4-4.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length including taking down of existing roof sheet complete all as specified and directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed.

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

S & F SDG frameless Mirror N45(18 x 24 inch with beveled edges,suitable for bathroom unframed wall mount , Rectangular , Silver etc complete all as specified and directed.

S & F Wall Set Multipurpose Bathroom & double dish & tumber & soap , tooth brush holder/towel holder stainless steel wall shelf three layer bathroom shelf medium ctc. complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and removing material for taking credit (credit for material should be made as per condition sepretly) and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

Point wiring of one light point/fan/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 25 mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box for Piano type wiring or metal flush box for modular wiring of required size & as directed & 3 mm thick plastic laminated sheet for piano type wiring or cover plate for with frame modular type, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

Point wiring for one 3 pin 15 Amps socket outlet independent with 4 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 4 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit.

Point wiring for one 3 pin 5A socket outlet independent with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl PVC conduit medium grade of 20mm dia controlled by one switch

Point wiring for for one 5A socket outlet on the same board with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl 20mm dia PVC conduit medium grade controlled by one switch

S&F in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

S&F of switch modular type single pole one way 1 module 6 amps 240 volts.

S&F of switch modular type one way 1 module 16 amps 230 Volts.

S&F of socket 6 amps modular type 2/3 pin combined 2 module , 230 volts.

S&F of socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts.

S&f ceiling rose surface backelite AC 220/230 V complete all as specified and directred.

S&F in replacement of Tube light fitting integrated type suitable for LED 20W(4 feet) indoor decorative aluminium extruded LED batten complete with housing with all accessories pre wired and making connection with three core copper flexible cable from ceiling rose to PVC connection to light fitting complete all as specified and directed.

S&F in replacement of Tube light fitting integrated type suitable for LED 10W (2 feet) indoor decorative aluminium extruded LED batten complete with housing with all accessories pre wired and making connection with three core copper flexible cable from celling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion esistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

S&F of Amp rating 240,10 KA C- curve MCB SP of 6 to 32 Amp with connection testing and commisioning.

S&F of Amp rating 240,10 KA C- curve MCB DP SPN of 40-63 Amp with connection testing and commisioning.

S&F in repair 1100 V grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathed of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4mm dia suspension wire one twin core 10 sqmm solid conductor.

S&F exhaust fan PVC body 250mm sweep single phase 230V 50 Hz AC 1400 Rpm energy saving heavy duty totally enclosed, heavy duty motor with die cast aluminimum rotor mounted on two ball bearing complete with lovour shutter including making hole to fix on wall and making good the disturbed surface with plastering and necessary brick work and distempering to match withh eixsting specification, connecting electrically using 3 core, 0.75sqmm PVC insulating flexible copper conductor cable all as specified and directed.

shivam builders (BID ID -3480990)

M/S RAMESH SINGH ADHIKARI (BID ID -3481757)

m/s RC punetha (BID ID -3480174)

G R INFRATEH (BID ID -3483224)