Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.6 LAccepted-AOC | ₹14.6 L | 1 | Accepted-AOC L1 bidder |
| 2 | 2₹14.7 L+₹10,555 (0.72%)Rejected-Finance 2817 20 GURU NANK AUTO MKT KASHMERI GATE DELHI 6 | ₹14.7 L+₹10,555 (0.72%) | 2 | Rejected-Finance L2 |
| 3 | 3₹14.9 L+₹28,413 (1.94%)Rejected-Finance | ₹14.9 L+₹28,413 (1.94%) | 3 | Rejected-Finance L3 |
| 4 | 4₹15.8 L+₹1.2 L (8.16%)Rejected-Finance | ₹15.8 L+₹1.2 L (8.16%) | 4 | Rejected-Finance L4 |
| 5 | 5₹15.9 L+₹1.2 L (8.35%)Rejected-Finance H 50 C SHAKARPUR DELHI 110092 | SHAHDARA | DELHI | 110092 | ₹15.9 L+₹1.2 L (8.35%) | 5 | Rejected-Finance L5 |
Tender Value
₹19.9 L
EMD Value
₹40,054
Closing Date
19 May 2023, 10:00 amClosed
Ex. Engineer (Elect)-I/CSPZ
UNDER GROUND CAR PARKING ASAF ALI ROAD, DELHI-110002
Providing and Fixing of LED Street Llights With Pole at Different Location in Ward No. 74 under City S.P. Zone
2023_NDMC_153842_1
01/MWEEE-I/2022-23/TC Item 01
Open Tender
Electrical Works
Item Rate
120 days
UNDER GROUND CAR PARKING ASAF ALI ROAD
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
₹40,054
5 Aug 2023
11 May 2023
19 May 2023
11 May 2023
19 May 2023
11 May 2023
Amount
OD6120/2022-2023:Fabrication , Supplying,Installation,testing, Commissioning of 12 mts.high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized 4 mm thick (Single dip ) inside & out sides &suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumfrential weld. It should also included accessories For High Mast head frame ,2 point suspension system with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos.flood light luminaries symmitrically And its control gear system boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC (1:2:4) shallow foundation of size1 1 m(L)X1 m wide and 2 m deep i/c excavation of earth, providing cutting bending and placing in position, reinforcemet of cold twisted bars of 12 mm dia-2100 mm long (approx.)- 16 nos. and reinforcement of cold twisted bar of 8 mm dia-3700 mm (approx.)- 13 nos. (with 150 mm spacing) as reqd. with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as reqd. for the high mast considering. The safe bearing capacity at site as 10 T/sqm at 2 mts. Depth with all material i/c 4 Nos. SPMCB, 63 Amp. DP isolator etc. as reqd. Logo/Name of manufacturer shall be embossed on the pole . Galvanization as per relevant IS.
OD6122/2022-2023:S.I.T.C. of 150 Watt LED flood light louminiare fitted with lense made of pressure die cast aluminium housing and Toughened glass cover complete with following specifaction as reqd. (a) Total system wattage = 150 watt +- 5 % (b) Lumnairer efficacy >= 100 luman/watt (c) Power Factor>= 0.95
OD6121/2022-2023:S.I.T.C. of 60 w LED street light fixture fitted with lense made of pressure die cast aluminium housing and Toughened glass cover comlete with following specifaction as reqd. (a) Total system wattage = 60 watt +- 5 % (b) Lumnairer efficacy >= 100 luman/watt (c) Power Factor>= 0.95 (d) protection Class- IP-66
OD6123/2022-2023:Fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, complete with window with flash cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd,terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable length, 1 Nos. 5/6 Amp. SPMCB ‘C’ characteristics, earth stud, cable support clamp suitable for 4x25 sqmm cable Logo / Name of manufacturer shall be embassed on the pole. Galvanization as per relevant IS. (a) 5.0 mtrs. height, 3 mm thick, bottom dia. of 130 mm & top dia. of 70 mm base plate of size 225 x 225 x 12 mm thick.
OD6125/2022-2023:Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm(L) x 450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -960mm long (approx.) - 8 nos.and reinforcement of cold twisted bar of 8 mm dia - 1400 mm (approx.) - 6 nos. (with 150 mm spacing) as required with supplying and positioning of 4 nos.foundation bolts of size 16 mm dia. 600 mm long , J type i/c 2nos. template anchor plates of size 225mmx225mmx3mm ad providing DCW HDPE for cable entry and exit as required for 3mtrs to 5 mtr.pole
OD6126/2022-2023:Supply & fixing of 32-65 mm dia GI pipe (M Class) 1 Mtr. long bracket i/c wiring with 2.5 sqmm copper conductor wire as required.
OD6124/2022-2023:Fabrication, supplying & fixing class B galvanized Single overhang arm bracket made out of 250 mm long galvanized top tube with cap & 250 mm long 32 mm dia galvanized pipe with tightening bolts complete as reqd.
2.12.2:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
7.5.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
7.6.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm
14.16.1.a:Supplying and laying of following size DWC HOPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)
5.2:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
5.12:Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
5.16:Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
OD6127/2022-2023:Supply of XLPE insulated and PVC/XLPE Sheathed AL conductor armoured cable conforming to IS7098 (PART-I)/7098 as required. (A) 3X6 sqqmm
1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
KHANNA SALES CORPORATION
M/S JAGLAN CONSTRUCTION
M/s Gyan Enterprises
Iluminators And Circuiteers
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .