REPAIR MAINTENANCE OF DRAIN, CULVERTS, SEWAGE LINE AND BOUNDARY WALL AR MIL STN BARABANKI UNDER GE (EAST) LUCKNOW

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thick (above or below ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintel up to 1.5m clear span, cills, steps, bands, coping including weathering, slightly rounded or champhered, angle and throating as directed and other similar work all as specified including necessary form work complete all as specified and directed.

Taking down of cement plaster on brick or stone wall etc, incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form mould mitered or stopped ends complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L, brick work with fly ash bricks modular, straight or curved on plan exc. 6.0M mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L, brick work with old bricks obtained from demolition, straight or curved on plan exc. 6.0M mean radius, built in cement mortar 1:6 complete all as specified & directed.

M&L, brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, shelves and similar articles set in CM 1:4 complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per Item No 13 above but 6mm to 8mm dia.

All as per item No 13 above but 5mm dia and over upto and including 10 mm dia in stirrups,apacers and binders.

M&L for rendering, 15mm thick in CM 1:4 on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground etc complete all as specified and directed.

Restraining and resecuring including making good staples etc to barbed wire galvanised 2 strand steel of any description and providing galvanised mild steel wire staple or steel pins complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails, straining bolts, including securing or tying at crossings with and provision of glavanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S&F for mild steel angle as in fencing post, including cutting to required length, drilling holes, spliting ends to be anchored complete all as specified and directed.

M&L for cement concrete type D-2 1:4:8 using 40 mm graded stone aggregate in filling foundation and mass concrete complete all as specified and directed.

M&L prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spcefied and directed.

M&L for prepation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying a coat of cement base paint on old surface of wall complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 150mm bore including packing under and hunching against the sides of pipes after they are laid & tested complete all as specified and directed.

S&F salt glazed stoneware drain pipe 150 mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls complete all as specified and directed.

Cutting into existing manhole for connecting new drain making good to pipe & rendering, cutting out existing benching for forming branch channel 1/2 round in PCC 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm dia pipe complete all as specified and directed.

M&L for cleaning and clearing off blockage of squat pattern WC & gully trap including flushing with water and clearing off the sludge etc if any from the premises of the building complete all as specified and directed.

M&L for cleaning of blockage of man holes upto 1.5 depth removing the sludge etc manually/ mechanically or pumping out sewage from blocked man hole and keeping sewer line functional and burying the night soil including excavation and earth work for pits for burying the night soil including applying two layers of bluching powder @ 5.00 KG per Sqm after removal and dried of sludge complete all as specified and directed.

M&L for cleaning of blockage sewage lines 150mm bore by rodding of pipe and desludging foreign mateials to clear the sewage lines including flushing of water complete all as specified and directed.

M&L for cleaning of septic tanks of any capacity and of any depth by desludging etc manually or mechanically from filled up septic tanks as ordered and burying the sludge including excavation and earth work for pits, and applying two layers of bleaching powder @5.00 kg/Sqm after removal and dried of sludge complete, measurement shall be taken only for actual sludge poured in pit complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor surface finished even and fair complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block ruberised any shape and size, with white cement & pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade joints of blocks to be filled with dry sand of 25mm thick complete all as specified and directed.

M&L for sand filling under floors etc complete including watering & well ramming complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using cement concrete 1:2:4 type B1 (20mm graded aggregate) complete all as specified and directed.

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED

KAWAL PAL SINGH & CO