REPAIR TO LT CABLE, PANEL BOARD AT TECH AREA AT AF STN PHALODI.

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for laying underground cable in soft/losse soil complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for laying underground cable in hard and dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in any type of soil complete all as specified and directed.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for dry tibba sand in trenches cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed. Note- Punned down thickness will be measured for payment purpose.

Supplying and laying reinforced precast concrete cable cover, class LV, with peak, Type 2, flat, size 300mm x 180mm x 40mm complete all as specified and directed.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

Disconnecting and Taking out of old LT armored PVC cables from trenches of any size/core/any voltage grade from trenches for replacement all as directed.

M & L for XLPE screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)with stranded aluminum conductor, 1100 volts grade, earth type cross sectional area 16 Sqmm 4 core LT UG cable laid in trenches/through pipe/fixed along pole or in duct with necessary angle iron support,clamp,nut bolts etc. complete all as specified and directed.

All as per item No. 9 above but size of cable 25 sqmm 3.5 core

All as per item No. 9 above but size of cable 35 sqmm 3.5 core

All as per item No. 9 above but size of cable 50 sqmm 3.5 core

All as per item No. 9 above but size of cable 95 sqmm 3.5 core

All as per item No. 9 above but size of cable 120 sqmm 3.5 core

Supply and replace aluminium cable lug in repair of size of cable lug 25 sqmm complete all as specified and directed.

All as per item No. 15 but size of cable lug 35 sqmm

All as per item No. 15 but size of cable lug 50 sqmm

All as per item No. 15 but size of cable lug 70 sqmm

All as per item No. 15 but size of cable lug 95 sqmm

All as per item No. 15 but size of cable lug 120 sqmm

All as per item No. 15 but size of cable lug 150 sqmm

All as per item No. 15 but size of cable lug 185 sqmm

All as per item No. 15 but size of cable lug 240 sqmm

All as per item No. 15 but size of cable lug 300 sqmm

Supply and replace aluminium crimping connectors in repair of size of crimping connectors 25 sqmm complete all as specified and directed.

All as per item No. 25 but size of crimping connectors 35 sqmm

All as per item No. 25 but size of crimping connectors 50 sqmm

All as per item No. 25 but size of crimping connectors 70 sqmm

All as per item No. 25 but size of crimping connectors 95 sqmm

All as per item No. 25 but size of crimping connectors 120 sqmm

All as per item No. 25 but size of crimping connectors 150 sqmm

All as per item No. 25 but size of crimping connectors 185 sqmm

All as per item No. 25 but size of crimping connectors 240 sqmm

All as per item No. 25 but size of crimping connectors 300 sqmm

Cutting of road / hardstanding upto a size not exceeding 20 cms in width and not exceeding 60 cms in depth for laying of LT UG cable protection piep line making good the disturbed portion so as to match existing finishing or with PCC 1:2:4 type C1 complete all as specified and directed.

S&F 50 mm bore tube, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in repair of LT panel foundation complete all as specified and directed.

M&L for making of surface for painting duly scrubing the existing paint and apply of two coats of existing synthetic enamel paint over a coat of red oxide primer for LT panel board/Feeder piller box of any size/type at various location complete all as specified and directed.

M&L for repairs to Outdoor/Indoor type LT panel Board of any capacity/size by repalcing pitted portion not excedding 1.0 sqm with suitable gauge of MS sheet,welding work,replacement of unservicable door Hinges and locking arrangement complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 63 Amps, 16 KA rating,Ics=75% Icu ,415 volts AC complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 125 Amps, 16 KA rating,Ics=75% Icu ,415 volts AC complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 160 Amps, 36 KA rating, 415 volts AC complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 200 Amps, 36 KA rating, 415 volts AC complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 250 Amps, 36 KA rating, 415 volts AC complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 350 Amps, 36 KA rating, 415 volts AC complete all as specified and directed.

S & F in repair Adjustable thrmal & Adjuatable magnetic setting MCCB Four pole 630 Amps, 50 KA rating, 415 volts AC complete all as specified and directed.

S & F in repair LT Cable jointing kit for straight through and heat shrink type joint complete with jointing material and accessories suitable for 70 to 150 sqmm XLPE armoured aluminium conductor cable including cutting and removing existing unserviceable joint, excavation near 2/4 pole structure / HT Panel board / Transformer and taking out loop cable from trench and refilling the trench with excavated material acomplete all as specified and directed.

S & F in repair of volt meter 0 --500 volt digital type square 96 sq mm AE/ENERCON lamp accurracy glass complete all as specified and directed.

S & F in repair of Ammeter 0 --200 Amp digital type square 96 sq mm AE /ENERCON lamp accurracy glass complete all as specified and directed.

S & F in repair LED batton fitting 1 x20 Watt, 220 V decorative box type with driver 4" complete fitting connection with 3 core flexible copper cable 23/0.00076 from ceiling rose to tube fitting connection etc complete all as specified and directed.

S & F in repair C T coil suitable for Amp meter 100 /5 Amp complete all as specified and directed.

S & F in repair indicating lamp set RYB for phase indication operating 240 volt 50 HZ AC with new one LED panel mounting type complete to match existing all as specified and directed.

S&F LED light fitting 10 Watt 2 feet mirror light luminarire with poly carbonate cover complete with all acessories and driver including connections with 3 core copper wire of suitable size complete all as specified and directed.

S&F PVC rectangular box with 5A flush type 2 in 1 switch socket combination complete all as specified and directed.

S&F PVC rectangular box with 15A flush type 2 in 1 switch socket combination240V complete all as specified and directed.

Supply & fix LED Aviation obstruction light 12 watt with light dependent sensor, IP65 protected complete all as specified and directed.

Dismantling and disconnecting all electrical and mechanical connection of existing siren system for taking out unserviceable/burnt motor of capacity upto 7.5 HP 3 Phase, 415 Volt, 50 Hz for rewinding, servicing and refixing the same complete all as specified and directed.