15th Finance Commission Funds Grant

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Lintels Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)) for Sunshades 0.60 mts wide with 75 mm at fixed end and 45mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 12mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Brick Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509) superstructure Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 12mm(1:5) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) - Internal Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901,903 & 904) - External Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of Medium Teak Wood Door Double shutter fully pannelled Door of size 1.20 x 2.10 mtrs with frame made of Best Teak Wood scantlings of size 100 x 75 mm and Shutter made of fully pannelled 38mm thick Best Teak Wood Shutters - 2 no's are of 30 mm thick as per approved design with fixtures of 300mm long M.S "Z" Hold fasts - 6 No's, 150mm long Brass Butt hinges - 4 No's, 200mm long Brass Tower bolts - 2 No's, 300 mm long Brass Aldrop -1 No's, Brass Door stoppers - 2 No's, 150mm long Brass Handles - 2 No's, with necessary screws complete including cost and conveyance of all materials and labour charges etc., complete as per specifications (APSS NO.1001 & 1002). (Door of Size 1200mm x 2100mm) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of doors as per approved drawings with Sal wood frame of section 100mm x 75 mm flush door shutter of 30mm thick Single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of sal wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 2 Nos tower bolts of 300 mm x 12 mm dia at top, 1 No. tower bolt of 150mm x 12mm dia at bottom, 2 Nos. 150mm long handles, 2 Nos heavy duty door stoppers and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and Fixing of MS Iron Grills including cost and conveyace of all materials and all labour charges etc., complete for finished item of workIncluding contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 12.5 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 200 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete including seigniorage charges etc., complete for finished item of work. (APSS No.701 & 707) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) BMT-P.80.A Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Pressed Clay Elivation tiles 200 X 150MM set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame . Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) for Septic tank Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for septic tank Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 225 x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials like cement, sand, fly ash solid blocks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504) for Septic tank all round Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm(1:3) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for internal Walls inside septic tank Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M 20 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) For septic tank cover planks Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Proviiding and applying Synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth sfter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,applying emery paper,sand the surface,clean & wipe off loose dust , applying knifing paste filler by putty knife/muslin pad , air dry for 2-3 hours , sand with 180 and 320 No , emery paper for the surface preparation including cost and conveyance of all materials to work sitwe and all operational,incidental,labour charges etc.comp. for finished item of work for Varandah dome portion. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Proviiding and applying Synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth sfter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,applying emery paper,sand the surface,clean & wipe off loose dust , applying knifing paste filler by putty knife/muslin pad , air dry for 2-3 hours , sand with 180 and 320 No , emery paper for the surface preparation including cost and conveyance of all materials to work sitwe and all operational,incidental,labour charges etc.comp. for finished item of work for internal walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Reinforced Brick Masonry for partition walls (115mm thick) in CM (1:4) prop. (Cement : Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 12mm(1:5) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) - Including contract profit, overhead charges, But excluding GST and Seigniorage charges

S & F 609.6 x 457.2 x 254 mmRCC terrazzo finished sink(or constructed at site with 50.8mm thick) brass plug and chain including CI cantilever brackets Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Carving letters and figures in stone up to 100 mm size Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic plastic emulsion paint of Interior primer grade standard make to interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) for ceiling Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic plastic emulsion paint of Interior primer grade standard make to interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) for inside walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic plastic emulsion paint of exterior primer grade standard make to interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) for external walls. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Electrical Arrangements

Supply and Fixing of 25mm dia 1.8mm thick (Medium type) PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in wall with all required accessoriesincluding masonary work for light, fan and separate plug point with 16 SWG MS deep box including all labour charges etc., complete. Including contract profit, overhead charges, But excluding GST

Supply and Fixing of 25mm dia 2.20mm thick heavy type PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.. Including contract profit, overhead charges, But excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FRLS) P.V.C. insulated flexible copper cable of makes Gold Medal (ISI MARK) in existing pipe with 6A switch and Ceiling rose of make Anchor/ Gold Medal Olive/ Million Zoom and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings . Including contract profit, overhead charges, But excluding GST

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control of make Gold Medal on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. . Including contract profit, overhead charges, But excluding GST

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete... Including contract profit, overhead charges, But excluding GST

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) of make Gold Medal on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. . Including contract profit, overhead charges, But excluding GST

Supply and fixing of batten holder / slanting holder of make Anchor/ Gold Medal Olive/ Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 7.0W LED Bulb/Lamp. . Including contract profit, overhead charges, But excluding GST

Supply and fixing of 20W,1900 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : Surya /C&S/ Fortune Art / Syska / Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Panasonic/Trinic/Lumens/ilite b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT . Including contract profit, overhead charges, But excluding GST

Supply,transportation and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan of make Crompton Decora/ Bajaj G Gold/ Havells Deco/ Usha Striker/ Orient PSPO. with 3 Blades and double ball bearings with all standard accessories and Stepped type electronic regulator of makes Miltec/ Vimal opel/ Maru Mantero/ Starex smile/ CPL. including labour charges etc . Including contract profit, overhead charges, But excluding GST

Supply and fixing SPN 8 way Distribution board with IP-43 protection (Metal Door) suitable for single phase 40A DP Isolator as incomer and 8Nos. 6-32A 10kA SP MCBs (make Standard/ Havells/ HPL/ Toyoma) as outing going including internal connection and labour charges for surface / flush mounting etc., complete.. Including contract profit, overhead charges, But excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.. Including contract profit, overhead charges, But excluding GST

WATER SUPPLY & SANITARY

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks.. Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels for 110 mm dia.. Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels for 75 mm dia.. Including contract profit, overhead charges, But excluding GST

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard pipes are made from idential CPVC compounds having the same physical Properties for 28.60mm ODPipe - SDR 13.5. Including contract profit, overhead charges, But excluding GST

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work. Including contract profit, overhead charges, But excluding GST

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Jeet make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work.. . Including contract profit, overhead charges, But excluding GST

Drilling of Borewell

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time Including contract profit, overhead charges, But excluding GST

Cost supply of 180mm dia. PVC 6kg per sqmm class III for casing CSSR Including contract profit, overhead charges, But excluding GST

Towards cost supply of 180mm dia. PVC BORE WELL CAP Including contract profit, overhead charges, But excluding GST

Towards slotting charges for 180mm dia. PVC pipes. Including contract profit, overhead charges, But excluding GST

Supply of WPSC insulated 3core 2.50sqmm flat copper cable CSSR Including contract profit, overhead charges, But excluding GST

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., ELEC 5.4.15 Including contract profit, overhead charges, But excluding GST

Supply and Transportation of 1 HP 10 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well.Makes: Pluga / Sterling / Falcon / Kumar / Unnati Zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/Anco/Sabar/Fitwell ELEC 5.4.2 Including contract profit, overhead charges, But excluding GST

S& F GIunion 25.4 mm Ist Quality Including contract profit, overhead charges, But excluding GST

Supplying and fixing Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc. complete for finished item of work. Including contract profit, overhead charges, But excluding GST

Supplying & fixing Gunmetal (GM) Horizontal Check(Non Return Valve) Valve as per IS-778 I-class heavy duty - 25 mm NB Size. Including contract profit, overhead charges, But excluding GST

Cost supply and fixing of Clampsets Including contract profit, overhead charges, But excluding GST

Manufacture, Supply, & Delivery of HDPE Pipes 25mm dia 16kg/sqcm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length... Including contract profit, overhead charges, But excluding GST

Earthwork excavation for foundations of building and depositing the earth on bank with an initial lead of 10m and initial lift of 2m in ordinary gravelly soils including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T&P, labour charges etc complete for finished items of work (APSS No 308).. Including contract profit, overhead charges, But excluding GST

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) ... Including contract profit, overhead charges, But excluding GST

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) HBG machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,and including all labour charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) . Including contract profit, overhead charges, But excluding GST

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403).For Footings Including contract profit, overhead charges, But excluding GST

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403).For Columns Including contract profit, overhead charges, But excluding GST

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403).For Plinthbeams Including contract profit, overhead charges, But excluding GST

Brick Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). Including contract profit, overhead charges, But excluding GST

Plastering 12mm(1:5) thick in single coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials, to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) INTERNAL WALLS / EXTERNAL WALLS. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No.911) in All Floors for exterior walls. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting two coats with synthetic enamel paint first grade to primer coat on new Iron work using red oxide Iron primer paint grade - I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. . Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supplying, fixing MS Grill using frame with 40mm X 40mm X 5mm alround welded with 10mm MS square bars at 100mm c/c duly welding As per drawings including cutting bars and angles, welding, fixing in position with 6 No's of MS "Z" holdfasts of size 300mm X 40mm X 5mm, including primer coat using 1st quality red oxide, cost and conveyance of all materials to site, labour charges etc., complete for finished item of work in all floors. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

TOTAL 74(SEVENTY FOUR) ITEMS

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Lintels Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)) for Sunshades 0.60 mts wide with 75 mm at fixed end and 45mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 12mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Brick Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509) superstructure Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 12mm(1:5) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) - Internal Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901,903 & 904) - External Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of Medium Teak Wood Door Double shutter fully pannelled Door of size 1.20 x 2.10 mtrs with frame made of Best Teak Wood scantlings of size 100 x 75 mm and Shutter made of fully pannelled 38mm thick Best Teak Wood Shutters - 2 no's are of 30 mm thick as per approved design with fixtures of 300mm long M.S "Z" Hold fasts - 6 No's, 150mm long Brass Butt hinges - 4 No's, 200mm long Brass Tower bolts - 2 No's, 300 mm long Brass Aldrop -1 No's, Brass Door stoppers - 2 No's, 150mm long Brass Handles - 2 No's, with necessary screws complete including cost and conveyance of all materials and labour charges etc., complete as per specifications (APSS NO.1001 & 1002). (Door of Size 1200mm x 2100mm) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of doors as per approved drawings with Sal wood frame of section 100mm x 75 mm flush door shutter of 30mm thick Single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of sal wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 2 Nos tower bolts of 300 mm x 12 mm dia at top, 1 No. tower bolt of 150mm x 12mm dia at bottom, 2 Nos. 150mm long handles, 2 Nos heavy duty door stoppers and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and Fixing of MS Iron Grills including cost and conveyace of all materials and all labour charges etc., complete for finished item of workIncluding contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 12.5 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 200 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete including seigniorage charges etc., complete for finished item of work. (APSS No.701 & 707) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) BMT-P.80.A Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Pressed Clay Elivation tiles 200 X 150MM set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame . Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) for Septic tank Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for septic tank Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 225 x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials like cement, sand, fly ash solid blocks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504) for Septic tank all round Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm(1:3) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for internal Walls inside septic tank Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M 20 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) For septic tank cover planks Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Proviiding and applying Synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth sfter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,applying emery paper,sand the surface,clean & wipe off loose dust , applying knifing paste filler by putty knife/muslin pad , air dry for 2-3 hours , sand with 180 and 320 No , emery paper for the surface preparation including cost and conveyance of all materials to work sitwe and all operational,incidental,labour charges etc.comp. for finished item of work for Varandah dome portion. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Proviiding and applying Synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth sfter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,applying emery paper,sand the surface,clean & wipe off loose dust , applying knifing paste filler by putty knife/muslin pad , air dry for 2-3 hours , sand with 180 and 320 No , emery paper for the surface preparation including cost and conveyance of all materials to work sitwe and all operational,incidental,labour charges etc.comp. for finished item of work for internal walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Reinforced Brick Masonry for partition walls (115mm thick) in CM (1:4) prop. (Cement : Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 12mm(1:5) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) - Including contract profit, overhead charges, But excluding GST and Seigniorage charges

S & F 609.6 x 457.2 x 254 mmRCC terrazzo finished sink(or constructed at site with 50.8mm thick) brass plug and chain including CI cantilever brackets Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Carving letters and figures in stone up to 100 mm size Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic plastic emulsion paint of Interior primer grade standard make to interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) for ceiling Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic plastic emulsion paint of Interior primer grade standard make to interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) for inside walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic plastic emulsion paint of exterior primer grade standard make to interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) for external walls. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Electrical Arrangements

Supply and Fixing of 25mm dia 1.8mm thick (Medium type) PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in wall with all required accessoriesincluding masonary work for light, fan and separate plug point with 16 SWG MS deep box including all labour charges etc., complete. Including contract profit, overhead charges, But excluding GST

Supply and Fixing of 25mm dia 2.20mm thick heavy type PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.. Including contract profit, overhead charges, But excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FRLS) P.V.C. insulated flexible copper cable of makes Gold Medal (ISI MARK) in existing pipe with 6A switch and Ceiling rose of make Anchor/ Gold Medal Olive/ Million Zoom and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings . Including contract profit, overhead charges, But excluding GST

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control of make Gold Medal on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. . Including contract profit, overhead charges, But excluding GST

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete... Including contract profit, overhead charges, But excluding GST

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) of make Gold Medal on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. . Including contract profit, overhead charges, But excluding GST

Supply and fixing of batten holder / slanting holder of make Anchor/ Gold Medal Olive/ Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 7.0W LED Bulb/Lamp. . Including contract profit, overhead charges, But excluding GST

Supply and fixing of 20W,1900 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : Surya /C&S/ Fortune Art / Syska / Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Panasonic/Trinic/Lumens/ilite b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT . Including contract profit, overhead charges, But excluding GST

Supply,transportation and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan of make Crompton Decora/ Bajaj G Gold/ Havells Deco/ Usha Striker/ Orient PSPO. with 3 Blades and double ball bearings with all standard accessories and Stepped type electronic regulator of makes Miltec/ Vimal opel/ Maru Mantero/ Starex smile/ CPL. including labour charges etc . Including contract profit, overhead charges, But excluding GST

Supply and fixing SPN 8 way Distribution board with IP-43 protection (Metal Door) suitable for single phase 40A DP Isolator as incomer and 8Nos. 6-32A 10kA SP MCBs (make Standard/ Havells/ HPL/ Toyoma) as outing going including internal connection and labour charges for surface / flush mounting etc., complete.. Including contract profit, overhead charges, But excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.. Including contract profit, overhead charges, But excluding GST

WATER SUPPLY & SANITARY

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks.. Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels for 110 mm dia.. Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels for 75 mm dia.. Including contract profit, overhead charges, But excluding GST

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard pipes are made from idential CPVC compounds having the same physical Properties for 28.60mm ODPipe - SDR 13.5. Including contract profit, overhead charges, But excluding GST

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work. Including contract profit, overhead charges, But excluding GST

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Jeet make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work.. . Including contract profit, overhead charges, But excluding GST

Drilling of Borewell

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time Including contract profit, overhead charges, But excluding GST

Cost supply of 180mm dia. PVC 6kg per sqmm class III for casing CSSR Including contract profit, overhead charges, But excluding GST

Towards cost supply of 180mm dia. PVC BORE WELL CAP Including contract profit, overhead charges, But excluding GST

Towards slotting charges for 180mm dia. PVC pipes. Including contract profit, overhead charges, But excluding GST

Supply of WPSC insulated 3core 2.50sqmm flat copper cable CSSR Including contract profit, overhead charges, But excluding GST

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., ELEC 5.4.15 Including contract profit, overhead charges, But excluding GST

Supply and Transportation of 1 HP 10 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well.Makes: Pluga / Sterling / Falcon / Kumar / Unnati Zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/Anco/Sabar/Fitwell ELEC 5.4.2 Including contract profit, overhead charges, But excluding GST

S& F GIunion 25.4 mm Ist Quality Including contract profit, overhead charges, But excluding GST

Supplying and fixing Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc. complete for finished item of work. Including contract profit, overhead charges, But excluding GST

Supplying & fixing Gunmetal (GM) Horizontal Check(Non Return Valve) Valve as per IS-778 I-class heavy duty - 25 mm NB Size. Including contract profit, overhead charges, But excluding GST

Cost supply and fixing of Clampsets Including contract profit, overhead charges, But excluding GST

Manufacture, Supply, & Delivery of HDPE Pipes 25mm dia 16kg/sqcm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length... Including contract profit, overhead charges, But excluding GST

Earthwork excavation for foundations of building and depositing the earth on bank with an initial lead of 10m and initial lift of 2m in ordinary gravelly soils including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T&P, labour charges etc complete for finished items of work (APSS No 308).. Including contract profit, overhead charges, But excluding GST

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) ... Including contract profit, overhead charges, But excluding GST

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) HBG machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site,and including all labour charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) . Including contract profit, overhead charges, But excluding GST

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403).For Footings Including contract profit, overhead charges, But excluding GST

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403).For Columns Including contract profit, overhead charges, But excluding GST

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403).For Plinthbeams Including contract profit, overhead charges, But excluding GST

Brick Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). Including contract profit, overhead charges, But excluding GST

Plastering 12mm(1:5) thick in single coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials, to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) INTERNAL WALLS / EXTERNAL WALLS. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No.911) in All Floors for exterior walls. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting two coats with synthetic enamel paint first grade to primer coat on new Iron work using red oxide Iron primer paint grade - I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. . Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supplying, fixing MS Grill using frame with 40mm X 40mm X 5mm alround welded with 10mm MS square bars at 100mm c/c duly welding As per drawings including cutting bars and angles, welding, fixing in position with 6 No's of MS "Z" holdfasts of size 300mm X 40mm X 5mm, including primer coat using 1st quality red oxide, cost and conveyance of all materials to site, labour charges etc., complete for finished item of work in all floors. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

TOTAL 74(SEVENTY FOUR) ITEMS