SPECIAL REPAIR TO BLDG NO T-22, T-54, T-57/A AND P-236 AT SHIKARGARH IN ARMY AREA JODHPUR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed by Engineer in charge.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specified.

M&L for Cement concrete 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) as in mass concrete etc., to make up undulations as in leveling course over roof with rough finished surfaces complete all as specified and as directed.

M&L for water proofing treatment for roof surfaces in the following stages :- (a) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. Note : (WPC shell be measured separately and paid for under respective item of schedule). (b) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/Sqm over plastered surfaces. (c) Second layer of 3 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3.60 Kg/sqm with mineral gravel finish on top complete laid with torch application method complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar (1:3) complete all as specified and as directed.

M&L for 100mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in water tank platform finished surface even & smooth without using extra cement including necessary form work complete all as specified.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in floors/ leveling course to floors/ sub base under floors finished rough and prepared to receive floor finishes complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.36 sqm, (matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer in charge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

M&L for 16 -18mm thick granite (black colour) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for machine cut mirror polished Kota stone slab 18mm (+ 2mm) thick as in window cills laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 as base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified and as directed.

M&L for machine cut mirror polished Kota stone slab flooring 18mm (+ 2mm) thick thick laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 as base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified.

M&L for machine cut Kota stone slab as in skirting, dado of length not less than 500 mm each unit, 18mm (+ 2mm) thick laid over & including 10 mm thick screed bed of rendering in cement mortar (1:4), set and jointed in cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified.

Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite/ mirror finish) complete all as specified and as directed.

M & L for 50 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded crushed stone aggregate, finished even & smooth without using extra cement, as in floors, pavings & plinth protection, complete all as specified. Note: The plinth protection shall be laid in panels and length of each panel shall not be more then 2.00 meter.

M&L cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base of floors complete all as specified.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Supply and laying 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade over & including 50 mm thick layer of sand cushion complete all as specified and as directed.

S&F for machine made precast cement concrete Kerb stone blocks using Cement concrete 1:3:6 type C1 (using 20mm graded crushed stone agg) complete all as specified and as directed by Engr-in-Charge.

S&F of wooden cleat of required size fixed with 50mm MS Butt hinge welded to steel frame as the stopper of the door as directed by Engr-in-Charge.

S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer in charge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 complete all as specified and directed. Note: Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

S&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand ,support using Angle Iron,MS Flat Iron, tubular section etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer all as specified and as directed.

M& L for preparation of new steel surfaces and applying two coats of synthetic enameled paint over a coat of red oxide primer on steel surfaces of any description, over 10cm in width or girth, not otherwise described

M&L for two coats of synthetic enamel paint over preprimed surfaces of steel windows complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified.

Dismantling Mild steel work of any description not otherwise provided for complete.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with L type or J type or cranked hook bolts all as specified

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel hollow section (Square/rectangular) or flat sections),including distance pieces, cleats etc conforming to Fe 410-W Gde E-250 quality A including fabrication, erraction and fixing complete all as specified.

S&F machine made precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls all as specified and as directed.

M&L for Jodhpur stone slab patti 40 to 50mm thick set in over and including 15mm thick cm 1:4 and jointed & pointed in neat cement slurry as in floors, plinth protection, steps etc; complete all as specified and directed.

Demolition of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

-ditto- all as per above item but, except stone complete all as specified and as directed.

M&L for providing precast cement concrete block masonary 1:3:6 with solid blocks exc 10cm in width and setting in cement mortar 1:6 all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for rough cast rendering on wall surface over 10mm thick in CM 1:3 complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

M&L 10mm thick rendering in CM 1:4 with water proofing compound on concrete surfaces of roof while concrete is green and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note : (WPC shell be measured separately and paid for under respective item of schedule).

M&L cool roof vitrified tiles (white or light shade as approved) of size 300x300x10mm thick fixed with spacers over 3mm thick high polymer modified grey cement based tiles sdhesive and grouted with epoxy grout complete all as specified and directed by Engineer in Charge.

Supply only integral water proofing liquid ISI marked Make: Pidiproof LW

M&L for machine cut squared/ round Jodhpur stone as in lintel beams or columns of any shape & size soffits, hoisted, set and pointed in cement mortar 1:4 with required grove/ camber, not exceeding 3.0mtr in length, crafted with ornamental type designs/ faces as required complete all as specified and as directed.

Dismantling cast iron work of any description and in any position complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

Fixing only in repair 100mm bore pipe cast iron or any type cowls, complete all as specified.

S&F 75mm bore pipe cast iron cowls, complete all as specified.

Fixing only in repair 75mm bore pipe cast iron or any type cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

Fixing only in repair any type or cast iron up 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as directed by Engineer in charge.

Taking down of steel windows/ vents or of any description/ size & shape with complete fittings and removing from site or to store complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer in charge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store as directed by Engineer in charge.

Cutting holes in brick walls built in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of hold fast exceeding half brick but not exc one brick complete all as specified and as directed.

Pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified

M&L 40mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides face is covered with 1mm thick deco rative face veneer with lipping/frame to match complete all as specified

S&F 35 mm thick factory made, 2nd class hard wood , glazed and skeleton door shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc , size of members of shutters as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, kiln seasoned and chemically pressure treated and fitted to chowkats complete all as specified and as directed.

S & F for mild steel barrel tower bolts, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified.

S & F for 250mm long mild steel, sliding door bolt, plate/ bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum six bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F for 150 mm size mild steel pressed handle oval type stove enameled black complete all as specified and as directed.

S&F for 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 125mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as sper the samples of Make : YANE/EVERBRITE or equivalent complete all as specified and as directed.

S&F for half round door stopper (6 to 7cm long double rod/ plate) of aluminium alloy bodey and tongue, anodised with rubber nosing including fixed to door with four Nos screws etc; complete all as specified and as directed.

M & L for fabrication of aluminium powder coated ventilators (with louvered) fabricated with anodized aluminium rectangular section in frame & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing etc all as per sample kept in GE office & fixed in position complete all as directed. (Note : Glass pane in louvers & stainless steel wire cloth shall be measured & paid separately)

M&L for aluminium framed doors/ partitions with shutters(Double/Single leaf) with one or more rebates,aluminium sections of approved make, including jointing cleat for fixing, handles, glazing/paneling boards etc complete all as specified and directed. Note: Floor spring/door closer, glazing and paneling shall be measured and paid separately)

M&L for aluminium framed windows, any pattern, fixed/side hung/sliding (two or three track) using aluminium sections, of approved make, with or with out sash bars, suitable for 4 mm thick glazing, including necessary joining cleats, glazing clips,aluminium snap beading, handles, locking arrangement etc. all as specified and as directed. Note: Glazing shall be measured and paid separately

Taking down and re-fixing /resecuring in same/ other opening/ location of aluminium door/ window/ partition of any description, size and in any position by taking down shutter from frame, opening out joints after taking down glass or particle board, replacing the corner piece & defective section members jointing again refixing the glass pane/ particle board etc; and complete all as specified and directed by engineer in charge. Note:- (i) Floor spring , door closer , lock , glazing , rubber gasket , aluminum glazing , defective aluminium part, and aluminium beading measured & paid separately.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

.-Ditto- all as per above item but 4mm thick frosted glass complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings. Make : Rajshree Doors or equivalent as approved by GE.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE.

S&F 100mm size PVC/ stainless steel butt hinges all as specified and directed.

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised all as specified and as directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, 150mm long all as specified and as directed

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.

S&F framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces, cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

Fixing only 15mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

Fixing only 20mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

Fixing only 25mm bore steel water tubing any grade with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

M&L vitreous china wash down water closet pan (pedestal pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet 'Praayag' Cat Part No 5211 or Equivalent) incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed in repair complete and making good the disturbed portion etc. all as specified and directed.

PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified.

S&F in repair for Vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections, complete all as specified and as directed.

S&F in repair vitreous china under/over counter wash basin, ivory colour, camry shape, size 550x405mm including CP waste fittings PVC waste pipe of suitable size/ bore and fixed over marble/granite or RCC platform including necessary cutting according wash basin shape/ size etc; and making good disturbed surfaces to match with the existing complete all as specified. (Make: CERA Cat No. S2030105) or equivalent in Hindware/Parryware.

Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs. Cleaning, etc and hoisting if required reconnecting refixing in position complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

Decorative mild steel curtain rods 32mm dia (powder/ PVC coated) including fixing brackets & side cups complete fixed in repairs i.e., including taking down the existing unserviceable curtain rods complete all as specified and directed

S&F in repair 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing in repair pillar tap for 15mm dia, brass chromium plated, fancy type screwed down, high pressure, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed. (Make: CERA Cat No. F1004101) or equivalent in Juguer/Kohlar.

S&F in repair 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F in repair CP towel ring fancy type fixed with CP brass screws complete all as specified. (Make: CERA Cat No. BA 02) or equivalent in Juguer/Kohlar.

S&F in repair CP towel rack fancy type fixed with CP brass screws complete all as specified. (Make: CERA Cat No. BA 03) or equivalent in Juguer/Kohlar.

S&F in repair soap dish fancy type fixed with CP brass screws complete all as specified. (Make: CERA Cat No. BA 85) or equivalent in Juguer/Kohlar.

S&F in repair fancy type corner glass shelf 300mm(with ABS brackets) 300x600 fixed with CP brass screws complete all as specified. (Make: CERA Cat No. BEA 46) or equivalent in Juguer/Kohlar.

S&F in repair CP greating doom 100mm dia complete all as specified.

Dismantling boarding of any description fixed in any position with nails, complete all as specified.

Hollow PVC wall lining interlocking type 7mm thick plain/ coloured, fitted into the wall with PVC rawal plugs and steel screws including fillets on joints as per manufacturers instruction complete all as specified and directed by Engineer in charge. (Note:- If any minor electrical fittings and fixtures disturbed their-in will be match and fixed as existing.)

S&F in repair Gypsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions, plain/ colour fixed with steel snap grid (powder coated bottom side) with 'T' and 'L' (25mmx30mmx1mm thick) section of size 600mm x 600mm placed in ceiling 'L' section fixed with wall with PVC rawal plugs and steel screws @ 600mm centre to center and suspended/ provided 5.0 mm dia galvanised bars @ 1.00 sqm hanging arrangements and levels including adjustable clips, complete all as specified in clause 10.38 of MES Schedule Part-1 complete all as specified and directed by Engineer-in- Charge. (Note:- If any minor electrical fittings and fixtures disturbed their-in will be match and fixed as existing.)

S&F for 12mm thick high quality thermal shocked resistance upto 250 Degree C, 65 MPa, toughened safety glass transparent type light coloured as approved by Engineer incharge with minimum distortion. Glass in shape of square/rectangular and size n.exc 8.0 sqm be fixed in a frame of 25 mm thick 2nd class hard wood with good quality sunmica top having both sides batten of approved design for making good. Glass be fixed with high carbon stainless steel jointing clits (fancy type) with stainless steel screw 75mm long, rawl plugs, clips or with expansion hold fastners incl necessary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc incl providing pivots and making provision for fixing of fittings where ever required.

M&L for providing and fixing 10mm thick plaster of paris as on ceiling (gypsum anhydrous) to flat surface over existing plastered surface of ceiling or provision with metal frame work as required and reinforced with G.I. wire mesh with and including any sunk or raised moulding complete all as specified and directed.

M&L for carrying out treatment for RCC Chajja’s, Ceiling, facia etc; in the following stages :- (i) Dismantling and removing damaged core concrete by manually/ mechanically means in columns, beam, roof slab, chajja, lintels, etc complete including disposal of unserviceable debris. (ii) Diamond wire saw cutting making profile at edges and avoiding feather edges.(iii) Hydro-demolition cutting / cleaning with high-pressure water jetting (iv) Chipping of loose concrete from surface to expose sound concrete beneath using light chisel, hammer & also preparing concrete surface to receive further treatment, disposing the unserviceable debris (v) Sand blasting for cleaning of reinforcement and chipped surface of concrete so as to cause an intense abrading of the reinforcement and removal of rust from entire surface of reinforcement to achieve shining bright surface (vi) Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface (vii) Providing and applying approved chemical rust remover with paint brush on corroded rebar and removing loose particles after 24 hours of its application and washed with sufficient quantity of water to make rebar free from corrosion (Dr. Fixit Rust Remover/equivalent), (viii)Surface preparation to remove all dust, dirt, loose rust scales etc., with wire brush, emery papers, rotary wire bristle brushes and grinding (if required) to the concrete surfaces to receive further repair treatment .(ix) Providing & fixing new reinforcement of various diameters as required at site in the form of mild steel and /or steel confirming to IS and lapping, welding, anchoring suitable to the old reinforcement including cutting, bending with all tools & tackles etc; (x) Providing and fixing GI weld mesh (1” x 1” x 12 gauge) with 30 cm lap at junction, one layer around the cross section of beams/ slab and along the span length. (xi) Providing and applying approved epoxy zinc rich anti-corrosive coating of 40 micron dry film thick/approved thickness of Dr. Fixit Zinc Rich Primer/ equivalent to the exposed reinforcing bars after application of rust remover, on the shear connectors/welded mesh/additional reinforcement of entire concrete repair surface. (xii) Dubbing out PMC 20mm thick (average thickness),(Polymer modified mortar/concrete) on uneven/ irregular surface such as walls / ceiling / chajjas etc. (using 12.5mm graded crushed stone aggregate) including 10mm thick PMM plaster in CM 1:3 ratio (Polymer modified mortar) on concrete surface (when concrete is green) ,(using Polymer modified 20% by weight of cement) complete all as specified and directed by Engr-in-charge.

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer in charge.

Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces all as directed by Engr in charge.

Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed by Engr in charge.

Ditto but except cement based putty.

Preparation of new plastered surfaces of walls etc. & applying three coats of lime white wash on walls complete all as specified.

Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified.

Preparing old plastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of distempered or painted surfaces and M&L for applying one coat of distemper oil emulsion on old plastered surfaces all as directed by Engr in charge.

Preparing old surfaces incl brooming surfaces, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots incl washing rubbing down and stopping of distempered and painted surfaces and M&L for applying one coat of cement base paint on walls etc., complete all as specified and as directed.

Preparation of old decorated plastered surfaces of walls etc. & applying one coat of white wash complete all as specified.

Preparation of old decorated plastered surfaces of ceiling etc. & applying one coat of white wash on ceiling complete all as specified.

Taking down carefully copper/Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades concial fan regulators, light or poer sockets etc) removing materials from site and making good distrubed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M&L for One light point controlled by one switch concealed point wiring complete with multistranded copper conductor 1.5 sqmm size PVC insulated FRLS unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wIring, drawn in including medium grade PVC conduit suitable capacity dia concealed, including cutting chases, finishing by means of cement mortor making good to the surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unshethed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. Make of wire: Finolex/Havells/Polycab (Make of Conduit : Finolex/Modi/Poly Cab)

DDitto as per item no 151 but One Fan point controlled by one one/way switch

Ditto as per item no 151 but One 3 Pin 5 Amps socket outlet on same board

Ditto as per item no 151 but One 3 Pin 5 Amps socket outlet on independent board.

Ditto as per item no 151 but One bell point controlled by one push bell switch

Ditto as per item no 151 but using 2.5 Sqmm PVC insulatd, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

M&L for Sub main wiring with PVC insulated but unsheathed 2x6 sqmm single core multi stranded copper conductor cable passing through and in and incl PVC conduit concealing in wall (by means of chasing incl making good existing ) ISI marked and conduit accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note:- Two runs of 6 Sq.mm. and one run of 4 Sq.mm. cable including PVC conduit will be measured as one length. Make of wire: Finolex/Havells/Polycab (Make of Conduit : Finolex/Modi/Poly Cab

All as above item No 157 but using 2x4 Sqmm cable single core copper with 2.5 Sqmm copper conductor as earth lead.

All as above item No 157 but using 4x10 Sqmm cable single core copper with 2x6 Sqmm copper conductor as earth lead.Make of wire

Supply and fixing switch piano, flush type ,single pole one way 5/6 Amps 240 Volts.

S/F switch socket combination 2 in 1, 3 Pin, and 5 Amp flush type universal.

S&F switch socket combination 2 in 1,5 Pin 5 and 15/16 Amp flush shuttered type ISI mark. Make: Cona/Anchor/Havells

S&F, in repalcement, of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : Havells (Rio) / Cona / SSK

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked

S&F Bell switch,flush type one way, 240 Volts.

S&F Bell ding dong type, one way, 240 Volts, AC, ISI marked

Supply and fixing connecting resistance type fan regulator A/C 240 Volts

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 32 Amps. Make : Legrand/ABB/L&T

S&F wall mounted LED batten 20 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver ,230 V, having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Philips/Havells/Crompton

S&F in replacement wall mounted LED batten 10/12 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, 230 V having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Philips/Havells/Cromption

S&F in replacement Square recess mounted LED slim down light with die cast aluminium housing finished in premium white powder coating 24 watt , 230 V including making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Crompton or equivalent in Phillips/Havells.

Supply and fixing, MCB/MCCB Distribution board (concealed flush to wall), , double door typein sheet metal enclosurewhenMCB to be used with 200 A rated copper bus bar confirming to relevant IS TPN 4 way complete all as specified.

Supply and fixing, MCB/MCCB Distribution board (concealed flush to wall), , double door typein sheet metal enclosurewhenMCB to be used with 200 A rated copper bus bar confirming to relevant IS SPN 8 way complete all as specified.

S&F MCB TPN 63 Amps,415 Volts,4 Pole `C` Curve

S&F MCB SPN 6-32 Amps,240 Volts `C` Curve

S&F MCB SP 6-32 Amps,240 Volts `C` Curve

Supply and fixing in repair for Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schedule part-I and testing after completion.

Supply & fixing bldg security LED Light Luminaire of 45 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with fixing of GI pipe 40 mm light grade 1.00m long bend at slop including drilling holling nuts & bolts 2 coats of Aluminium/paint over of red oxide paint on GI pipe and fixing with wall security light on building wall complete as per make Bajaj/Philips/G.E/Crompton including clamp/pipe/nuts & cable all as directed

S&F connecting and commissioning of wall Light fixture 60 Watt LED,IP-66 protected ingle piece Die-cast aluminium housing and heat sink having heal resistive toughned glass at bottam, individual LED shall be having LM-80 complied as per L70 with 5700-6000K CCT. Optics shall be with proper distribution having lenses of either PMMA of polycarbonate material. Maximum power consumption shall be 60 Watt with min 6000 system lumens. 3stage CCCV driver with min, 4kv surge protection voltage range of 150-270V AC and DC out put operting voltage of driver should be complied to SELV norms not exceeding 72 DC only and including 40 mm light grade and MS clamp with nut & bolt all as specified as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-In-Charge.

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified.

Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone slab cover 25 cm to 30 cm wide and not less than 60 cm long dry laid aboutting each other with gap between adjacenet slabs not exceeding 10 mm for underground cable for protection.

Supply and laying in trenches/fixed on walls/poles of passing through pipe, PVC insulated armoured heavy duty LT U/G electric cable with aluminium conductor 1100 volts grade with suitable cable glands and lugs etc as required of following sizes . (a) 25 Sqmm x 4 Core

Supply and fix GI tubing light grade for protection of cable at wall/trench with fixing accessories as directed of 40 mm dia bore

S&F ceiling fan 1200 mm sweep complete with all accessories including fan blade of white colour & electronic fan regulator, 5 star rated, connectiing up complete with including three core flexible PVC insulated multi stranded copper of size 1.0 sqmm celing rose/conector to fan (earth wire to connected to fan hook) MOdel : Bajaj/Havells/Khaitan

M/s Ajay kumar Garge

HOODA CONSTRUCTION COMPANY

DEV INDUSTRIES

Diva Infra

Mahesh Dave

S D POWER SOL

HINDUSTAN TRADING COMPANY