Renovation of morcha, exterior painting and other Miscellaneous works at CISF barrack in HWPM Colony.

Amount

Providing and laying Brick masonry work with non modular Fly ash bricks with CM 1:6 (1 Cement : 6 Coarse sand) using 43 grade OPC cement of ACC/ Ultratech/ Birla A1 or any other approved make conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level including cost of scaffolding etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying in position Plain cement concrete of grade 1:2:4 (1 ordinary portland cement 43grade : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) cement is of ACC/ Ultratech/ Birla A1 or any other approved make, work upto plinth level including cost of Centering/ Shuttering, compaction, levelling, finishing and curing etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying in position Reinforced cement concrete in slabs of grade 1:1½:3 (1 ordinary portland cement 43grade : 1½ coarse sand : 3 graded crushed stone aggregate 20 mm nominal size) cement is of ACC/ Ultratech/ Birla A1 or any other approved make , RCC work upto floor V level including cost of Centering/ Shuttering, compaction, levelling, finishing and curing but excluding the cost of reinforcement etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing, laying and fixing in position TMT reinforcement bars of grade Fe 415/ 500 of TATA/ JINDAL/ SAIL/ VIZAG or equivalent make for RCC works, including cost of supplying, cutting, bending, transporting, erecting, binding with 18 gauge MS annealed wire, cement mortar spacer blocks etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying 18mm thick water proof cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 Cement : 5 coarse sand) and a top layer of 6mm thick cement plaster 1 : 3 (1 cement : 3 Fine sand) using approved water proof compound as per manufactures specification in both the coats and finished smooth with a floating coat of neat cement with water proof compound including racking of joints, hacking concrete surfaces, scaffolding, curing etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. (Liquid water proofing compound of M/s SIKA or equivalent proportion 1.50 Kg/50kg bag of cement)

Providing and laying 12mm thick cement plaster of 1:4 (1cement : 4 fine sand) 43 grade OPC cement of ACC/ Ultratech/ Birla A1 or any other approved make, upto floor V level over a brick work/ concrete wotk to give even smooth finish including cost of scaffolding where ever required and curing etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and applying two or more coats of acrylic smooth exterior coating of Apex Ultima of M/s. Asian Paints/ Excel of M/s. Nerolac/ Heatshield of M/s. O.FIXIT/ Weathershield Max of M/s. ICI Delux or other approved equivalent make and shade over the plain plastered/ sand face / rough cast plaster/ RCC jalli / RCC fins at locations as required on old wall surfaces, applied @ 1.67 ltr/10 sqm. over and including priming coat of exterior primer applied@ 2.20 kg/ 10 sqm), ensuring an interval of 4-6 hours for each successive coats, scaffolding, safety appliances insurance coverage to workers etc., at all heights all complete as per the manufacturer's specification and as directed by the Engineer in Charge.

Providing and applying one or more coats of Distemper with 1st quality acrylic distemper of Asian/Nerolac/Berger approved make, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, including applying additional coats wherever required to achieve even shade and colour of Asian/ Nerolac/ Berger or approved make and brand on old surface including surface preparation, cleaning of surface, removing old loose paint, removal of nails etc., filling of the holes/ cracks/ depressions with approved crack filler, sand papering, removal of cob webs, cleaning etc., complete including all materials, labour, transport, scaffolding as and when required and cleaning of the rooms after completion of work etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and applying two or more coats of ready mixed synthetic enamel paint of Asian/ Nerolac/ Berger or approved make and shade over old surface of wood/ steel work including the cost of scaffolding, cleaning, preparation of surfaces, necessary repairs to scratches/cracks with putty, arranging safety appliances, Insurance coverage to workers, at all heights all Complete as per specifications and as directed by the Engineer In Charge.

Lettering with black japan paint of approved brand and manufacture complete as per specifications and as directed by the Engineer In Charge.

Supplying and fixing 110mm dia size uPVC UV Stabilised soil/ waste quality pipes and fittings (SWR) for soil, waste, vent, antisyphonege, HVAC waste pipe and rainwater pipe lines with Single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, consisting following items of work:- i) Supplying uPVC UV-Stabilised Soil/ waste pipe as per IS:13592 Type A and IS:14735 Grade-B Fittings of Supreme make (fittings will be measured as part of the line by linear measurement along the pipe line; and no separate payment is made. No claim whatsoever will be entertained in this regard). ii) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls/ floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. iii) Necessary cutting to the required length including short pieces, fittings with or without door, assorted fittings such as plugs, tees,couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets etc., all complete as per specifications and as directed by the EIC.

Removing the GS/ AC/ NonAC/ FRP sheets at all heights (up to 30 M) i.e. from roofing/ cladding etc., and stacking the serviceable materials & handing over the same to the sectional stores, disposal of debris to the dumping yard etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and fixing precoated galvanised iron profile sheets of brands JINDAL/ TATA or any other approved make (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15 18microns. Sheet should have protective guard film of 25microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or as desired by Engineerin charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, or fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers along with wind tiles complete upto any pitch in horizontal/ vertical or curve surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. etc.,all complete as directed by the Engineer In Charge.

Supplying, fabricating and fixing of hot finished welded type tubes structural steel work in builtup sections of make VIZAG/ SAIL/ TATA/ JINDAL or equivalent make (round, square or rectangular hollow tubes, plates, bolts) etc., including cutting, hoisting, fixing in position and applying two coats of synthetic enamel paint over a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete as per drawings, specification and as directed by the Engineer-in-charge.

Providing and laying Cement concrete flooring of grade 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate) 40 mm thick with 20 mm nominal size stone aggregate finished with a floating coat of neat cement of ACC/ Ultratech/ Birla A1 or any other approved make, including cement slurry, but excluding the cost of nosing of steps etc.complete as per specifications and as directed by the Engineer InCharge.

naresh constructions

Sri Bhargavi Engineering Works