Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC 161 MISSION INTER COLLEGE ROAD VILL PITHORAGARH DISTRICT PITHORAGARH STATE UTTARAKHAND PIN 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹46.9 L+₹1.6 L (3.47%)Rejected-Finance VILL KASHNI NEAR AANCHAL DAIRY PO BIN PITHORAGARH UTTARAKHAND PIN 262508 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262508 | L2 | Rejected-Finance Higher quoted biodder. |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
26 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
COMPREHENSIVE MAINT TO CERTAIN BLDGS OF KHPC, OLD KUMAON SCOUTS AND NEW KUMAON SCOUTS LOCATION AT MIL STN DHARCHULA UNDER GE PITHORAGARH
2022_MES_541799_1
8477/DHR/E8
Open Tender
Miscellaneous Works
Item Rate
330 days
AGE Dharchula
Class D, Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹96,000
Yes
14 Nov 2022
29 Jul 2022
2 Sept 2022
29 Jul 2022
26 Aug 2022
12 Aug 2022
60 days
Amount
DESCRIPTION OF ITEMS
Demolition of cement concrete in ground floor,paving nexc 15mm thick(below or above GL) complete all as specified and directed
Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc.
Demolition of brick work, stone/boulder masonary built in cement mortar complete all speecified and directed
M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6 m mean radius, built in cement mortor 1:6 complete all as spfd & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed
M&L for coloured glazed ceramic tiles in verticla surface, 450x350x7mm thick set and jointed in neat sement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed.
S&f 20-25mm dia stainless steel curtain rods fancy type includiong all necessary fittings like brackets, screws, holders etc as per sample approved complete all as specified and directed.
M&L for providing Kota stone slab 20 to 25mm thick machine cut and mirror polished to size and fixed in floor and set and jointed in neat cement slurry and pointed with grey cement to match the stone over and including 15mm thick screed bed in CM (1:6) for floor complete all as specified and directed..
S&F 38 mm wide and 3mm thick glass dividing strip complete all as spfd and directed
M&L for 40 mm th PCC 1:2:4 type B1 (using 20 mm graded stone agg) as in flooring finished even & smooth without using extra cement complete all as spfd & directed.
M&L cement concrete 1:4:8 type D2 (40 mm gradede agg) in foundation, filling and mass concrete complete all as spfd & directed.
M&L for cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate 75 mm thick as in plinth protection all as specified and directed.
Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each omplete all as specified and directed.
M&L plain solid chowkhats and frame wrought framed rebated on solid rounded or chamfered of 2nd class hardwood complete all as specified and directed.
M&L for 30 mm thick plain, framed pannelled shutters (any number of of panels), with panels with panels of timber flat on both sides (feather edged), or of venered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkhat complete all as specified and directed.
M&L for 2nd class hardwood, 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc. devided into squares, with plain, chamfered or rounded , mitred and rebated shash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc; size of members of shutter as specified in SSR Part I, Sectioin 8 clause 8.24(a); supplied and fitted to chowkhat.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle and locking arrangement, and steel peg stay, complete with glazing bars, dovetailed or welded all as spfd and as directed.
-ditto- but without glazing bar
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floors 150mm long all as specified and as directed.
M&L Anodised aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fastners/rawl plugs etc. complete all as specified and directed.complete all as specified and directed.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed
S&F anodised aluminium window and ventilator shetters, sliding type with 3 track sliding shutter, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazinig clips, rubber packing, anodised snap beading, screws, rollers, handle and locking device etc. complete all as specified and directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel covr, governing pivo made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or descrption) from metal frame including punching or driling outold glazing pins/springs and providing new ones.
S&F 5.50 mm thick sheet glass ordinary quality and glazing with oil putty/rubber packing in square exc .50 sqm in each panels complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 100 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed
ditto but75 mm in size complete all as spfd and directed.
S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.
S&F 150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed
S&F 125 mm Mild Steel barrel tower bolts, stove enamelled, black with bright bolts complete all as specified and directed
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple 9bolt type) and fixing bolts of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc.
M&L for mild steel framed wk as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rail sand suides) & hanging, also fastening & fixing Fe-290, Gde-165 complete all as spfd & directed.
Taking down wall panelling and similar work as in kitchen cabinet/cupboard all as sfd and as directed.
M&L for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as spfd and directed.
S&F 6mm thick teak wood lipping fixed with nails to block board or veneered particle board all as spfd and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm) all as specified.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.
S&F catch magnet for cupboard shutter complete all as specified and directed.
Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.
M&L 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L providing cement concrete type B0, 1:2:4 (12.5mm aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed
S&F in repairs vitrous china wash basin,white flat back size 550X400mm including pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks, 32mm in size Waste fittings, brass, chromium plated and brackets fixing in position complete all as specified and directed.
S&F in repair vitreous china squatting pan of pattern "long pan" size 580 mm white with 'P' or 'S' trap, front or back inlet and foot rest any pattern (excl flushing cistern and flush pipe) incl provn of lime concrete bedding complete all as spfd & directed.
S&F in rep vitreous china squatting pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as spfd & directed.
S&F in rep sinks made of stainless steel 1 mm th kitchen or laboratory with plugs, washers & waste coupling, incl bedding in CM to dwarf wall or incl fixing cantilever brackets & connecting union to pipe over all size 495x420mm bowl size 410x330 mmx160 mm complete all as spfd & directed.
S&F PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets and PVC flush pipe 32 mm dia fixed in repairs complete all as specified and directed
S&F in repairs bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrel and fixed 15mm dia complete all as specified and directed.
S&F in repairs bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrel and fixed 15mm dia complete all as specified and directed.
Supply and Fix in repair brass CP angle stop cock 15 mm dia complete all as specified and directed.
S&F 15 mm Stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as spfd & directed.
S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as spfd & directed.
S&F in repairs plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devise complete all as specified and directed.
M&L for 32mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in reapirs
M&L for 40mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in reapirs
Supply only 32mm in size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end cp fixed in reapirs
S&F PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed.
S&F PVC waste pipe 32/40 mm dia for wash basin/kitchen sink in repairs complete all as specified and as directed.
M&L for PVC (SWR) floor trap, 75mm diameter of outlet, plain with grating including jointing with solvent fixed in reapirs cemplete all as spfd and directed.
M&L for PVC (SWR) gully trap, 125/110mm, setting and jointing with solvent fixed in reapirs complete all as spfd and directed.
S&F 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed.
S&F 15 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed.
S/F swivel shower of PTMT any colour for fixng with 15mm pipe along with shower arm 15mm size 195mm long with bend of 45 degree with flage of PTMT any colour,fixed in repairs complete all as spfd & directed
S/F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as spfd & directed
S&f in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
Supply and fix 2000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantlling old water tank, complete all as specified and directed.
Supply and fix 500 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantling water tank capacity exc 2500 ltrs but nexc 500 ltrs and removing to stores complete all as specified and directed
Supply and Fix in replacement lid with hinges on one side & locking facility on another side/ or with thread of PVC drinking water service tank of capacity upto 2000ltrs complete all as specified and directed.
Supply and fix in repairs CP Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and directed
S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors in repairs complete all as specified and directed.
-Ditto- but 110 mm
S&F 75mm dia PVC (SWR) bends any radius provided with access door complete all as specified and directed.
Dismantling of wall and celing boards/AC sheets in any thickness & any position including cover fillets complete all as specified and directed
M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed.
S&f 5-8mm thick hollow PVC coloured wall paneling/lining, tongue and groove type including all necessary PVC coloured beading and screws/solvent and fixing at site complete all as specified and directed.
Dismanteling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed
M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed.
Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed.
M&L for II nd class hard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed
M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed
M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as spfd and directed
S/F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts class 8 complete all as spfd & directed
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Preparing newly plastered wall surfaces and applying two coat of oil emulsion distemper over a coat of plaster of paris putty of 1mm thckness over plastered surface to prepar the surface even and smooth complete all as specified and directed.
M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less that 50gm/liter and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter / 10 Sqm over and including priming coat of exterior primer applied @0.90 liter/10 Sqm over new surfaces complete all as specified and directed.
M&L for preparing newly plastered surface of wall apply two coat of cement base paint over a coat of white wash complete all as specified and directed
M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed
M & L preparing old previously treated surfaces of corrugated/plain sheets as in roof covering /wall over 10 cm girth or width by cleaning straightening if any removing rust and making good where required and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.
M&L for two coat of synthtic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and directed
M/L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed.
E&M Items: Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.
M&L point wiring with 1.5 sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/surface casing capping or PVC conduit of suitable size, complete with all accessories /fitting and heavy duty PVC rectangulater terminal switch board of suitable size with 3mm thick plastic laminated sheet top cover open/surface on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed for One light point/Fan point/bell point controlled by one way switch of 5/6 Amps.
One 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps but with cables 1.5 sqmm size.
One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps but with cables 2.5 Sqmm size.
M & L power point wiring with 4 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in open/surface casing capping or PVC conduit of suitable size, complete with all accessories /fitting and Heavy duty PVC rectangular termninal switch board of suitable size with 3mm thick plastic laminated sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 4 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly complete all as specified and directed.
M & L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC concealed conduit 20mm or higher dia, complete with all accessories /fitting and sunken terminal boxes, switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly including making good disturbed surfaces to same as previous existing complete all as specified and directed for One light point/Fan point/bell point controlled by one way switch of 5/6 Amps
One 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps but with cables 1.5 sqmm size
One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps but with cables 1.5 Sqmm size
M & L power point wiring with 4 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC concealed conduit not less than 20mm dia , in concealed type complete with all accessories /fitting and sunken terminal boxes, switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 4 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly including making good disturbed surfaces complete all as specified and directed.
M & L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in existing PVC concealed conduit 20mm or higher dia, complete including opening sunken terminal boxes, switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed, refixing the same with brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly including making good disturbed surfaces to same as previous existing complete all as specified and directed for One light point/Fan point/bell point controlled by one way switch of 5/6 Amps.
One 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps but with cables 1.5 sqmm size
One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps but with cables 1.5 Sqmm size
M & L power point wiring with 4 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in existing PVC concealed conduit 20mm or higher dia, complete including opening sunken terminal boxes, switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed, refixing the same with brass screw and washer including unsheathed single core PVC insulated cable green in colour 4 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly including making good disturbed surfaces complete all as specified and directed.
S&F in repairs switch piano flush button single pole one way 5 Amps complete all as specified and directed.
S&F in repairs modular switch one way 6 Amps, 1 module complete all as specified and directed.
S&F in repairs switch piano flush button single pole one way 15Amps complete all as specified and directed.
S&F in repairs modular switch one way 16Amps, 1 module complete all as specified and directed.
S&F in repairs socket out let 3 pin 5/6 Amps flush type complete all as specified and directed.
S&F in repairs modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed.
S&F in repairs socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified and directed.
S&F in repairs modular socket, 6A/16A-2/3 pin combined, 2 module complete all as specified and directed.
S&F in repairs Ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed.
S&F in repairs lamp holder PVC/poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed.
S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.
S&F sheet metal enclosure for DB SPN 4 way 240 Volts, single door suitable for housing MCBs and isolators including taking down unserviceable complete all as specified and directed.
S&F sheet metal enclosure for DB SPN 8 way with 200 Amp rated bus bar 240 Volts, single door suitable for housing MCBs and isolators including taking down unserviceable complete all as specified and directed
S&F in replacement of MCB SP 6-32 Amps, 240volts 10KA complete all as specified and directed.
S&F in replacement of MCB SPN 32/40 Amps, 240volts 10KA complete all as specified and directed.
S&F in replacement of MCB TPN 40-100 Amps, 240volts 10KA complete all as specified and directed.
M&L in replacement for sub main wiring with 2 runs of 6 Sqmm and one runs of 4 Sqmm Copper cable multistranded drawn through existing surface /recessed steel/PVC conduit providing necessary clamp, screw, thimble and connected to MCB/DB box /main switches etc all as specified and directed.
S&F in replacement of LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F in replacement of LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F in replacement of LED bulb 12 watts, 220V complete all as specified and directed..
M&L in replacement for 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with an inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 M apart including 4mm dia GI suspension wire one twin core flat or circular stranded/solid conductor of size 10 Sqmm complete all as specified and directed.
Dismantling house service brackets, any type from existing position
M&L for house service bracket (hook type complete with 3.0 mtr long GI Pipe 40mm dia med grade, two nos 90 degree bend, clamps, nuts and bolts, washers, MS hooks and stay or guy all as reqd at site and directed.
S&F in replacement of 1x35 watt LED building security light fitting, with and including GI bracket made out of 1.5 mtr GI pipe bent to shape light grade of 40mm dia, bracket mounting clamps nut bolts etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductore cable complete all as specified and directed.
Material and Labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009 including dismantling old earthing complete all as specified.
Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified all as directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified and directed.
Supply only Ball bearing for Ceiling fan after and including taking down old ball bearing complete all as reqd at site, specified and directed.
Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified and directed.
M&L for painting with one coat of spray paint with white enamelled paint on external surface of ceiling fan of any size complete after duly prepared the surfaces by rubbing with wire mesh, washing with soap water including filling cavities with filler, one complete including writing of MES Number all as specified and directed.
Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing split pins, check nuts, rubber seal bushes etc and rehanging duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified all as directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
M&L for taking out burnt copper winding from exhaust fan of any size/type and rewinding with existing /same guage of super enammeled copper wire complete all as specified and directed.
S&F capacitor 4 mfd±5%, 440 Volt, AC, 50Hz or suitable one after removing old defective condensor complete in exhaust fan all as specified and directed.
M&L for painting with one coat of spray paint with grey/blue enamelled paint on external surface of exhaust fan of any size complete after duly prepared the surfaces by rubbing with wire mesh, washing with soap water complete including writing of MES Number all as specified and directed.
Taking down carefully storage water heater of capacity 25/35/50 ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, welding of inner tank if required at site, rethreading of inlet/outlet pipe 15 mm dia, reassembling the same at existing /new location including necessary fasteners to ensure proper safety as reqd at site, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.
Supply only thermostate fitting fitment varying capacity for 25/35/50ltrs capacity geysers incl taking down old thermostate..
Supply only PVC connection pipe nylon threaded 15mm size with brass nuts copping in both end of length 600mm for geysers complete all as specified and directed.
Supply only heating element of 1.5/2.0 KW for geyser (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
Taking down flate-plate solar collector storage solar water heater of capacity upto 250ltr, dismantling inner tank and outer tank, pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, welding of inner tank if required at site, laser/ultrasonic welding for bonding fin and raiser tube, repair of copper bracing for bonding of header and raiser making leak proof, repair & repalcement of back and side insulation material, rethreading of inlet/outlet pipe 20 mm dia, reassembling the same after replacing u/s items i.e. heating element, thermostete, toughned glass, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified and directed. Note: Spare parts (heating element, thermostete, toughned glass, connection pipe with clamp) will be measured and paid separately under respective items as supply only as mentioned below.
Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) including taking down old heating element complete all as specified and directed.
Supply only thermostat for solar water heater incl taking down old thermostat.
Supply only flat-plate solar collector transparent cover to prevent heat loss and made with iron poor solar safety toughened glass, 4 mm thick with low iron, transmissivity upto 92% at near normal incidence glass as same as existing incl taking down old flat-plate solar collector.
Supply only Heavy duty nylon threaded flexible PVC/CPVC connection pipe 25 mm dia suitable for both hot & cold watrer supply of solar water heater complete all as specified and directed.
Supply only GI/brass adjustable scew clamp as per sample
Supply, laying and testing GI pipe medium grade 15 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as speficied and directed incl taking down old GI pipe.
Supply, laying and testing GI pipe medium grade 20 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as speficied and directed incl taking down old pipe.
Taking up or down steel tubing and connections, including cleaning for re-fixing and re-fixing the same at new or old locations by replacing worn out GI fittings complete all as specified and directed. Note: GI fittings as required shall be measured and paid separately under respective items as supply only as mentioned below.
Supply only Elbow 15mm ISI Marked.
Supply only Socket 15 mm ISI Marked.
Supply only Union 15mm ISI Marked.
Supply only Reducer Socket 20/15 mm ISI Marked.
Supply only Tank nipple 15 mm ISI Marked.
Supply only Nipple 15 mm ISI Marked.
Supply only Butterfly valve 15mm ISI Marked.
M&L in replacement sub main wiring with 2 run of 4 sqmm and one run of 4 sqmm Copper cable FRLS multistranded drawn in and including PVC conduit in surface/recessed providing necessary clamps, screws, thimbles and connected to MCB of solar water heater/DB box etc all as reqd at site, specified and directed.
M/s J P Traders
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .