Providing and Erecting of Electrical Line at Dumping Site in Tarsadi Municipality, Tarsadi.Dist.:- Surat.

Name of Work :- Providing and Erecting of Electrical Line at Dumping Site

in Tarsadi Municipality, Tarsadi.

Qty It No. Description Rate Unit Amount

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to

2.00 1 work on A.C.supply 50 c/s. with all internal connections, 8055.76 Nos.

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal & magnetic

6.00 2 release suitable to work on A.C.supply 50 c/s. with all 20946.39 Nos.

internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 50 KA and above at 415 V having Normal

current rating 400A. with variable Thermal & magnetic

2.00 3 release suitable to work on A.C.supply 50 c/s. With all 25228.79 Nos.

internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

1.00 4 operating mechanism A.C.23 duty confirming to IS for (F) 22255.35 Nos.

Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

8.00 5 operating mechanism A.C.23 duty confirming to IS for 7319.47 Rnmtr.

(F)400A Cat-lll

Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

3.00 6 operating mechanism A.C.23 duty confirming to IS for 3202.71 Rnmtr

(B) Suitable for 200 Amp. capacity

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking

10.00 7 capacity & confirms to IS :8828 in existing box having 737.30 Nos.

following capacity (c)63 Amp.

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

50.00 8 Transformer LT panel board, Motors etc. using proper 77.77 Kg

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty

cover (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

4.00 9 62561-2017, Voltage drop:- < 1 volt at no load & dry form, 10593.89 Nos.

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [C] For

Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e. independent Earthing

located in other than normal soil i.e. Soft Rock, Marshy

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG

thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

10.00 10 rubber grommets, rib, bakelite control fuses/MCB for 19387.96 Rnmtr

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (B) The standard

companies switch gear shall be used and only

manufacturers at CPRI approved factory (ii) with

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.(A) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.(B) 3 1/2 core 35 Sq. mm (

Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B)

1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables. (C)

Contigency 2% Rs.

Grand Total Rs.

Grand Total Rs.

(A) Total Tendered amount Rs.

(B) Rebate on above tendered amount (if any) ………..% (in figure) Rs.

(C) Net Tendered amount (A-B) Rs.

(* Please strike out whichever is not applicable).

Note:- 1 All work shall be carried out as per Public works Department Handbook and other

specifications of Division or as directed.

Note:- 2 Rates quoted include clearance of site ( prior commencement of work and its close ) in all

respects and hold good work under all conditions,site,moisture,weighter etc.

Note:- 3 I/We have read the conditions mentioned in this tender and agree to abide by the same.

Municipal Enginner Chief Officer

Tarsadi Nagarpalika Tarsadi Nagarpalika Signature of the Bidder

Tarsadi Tarsadi