PROVN OF BDY WALL WITH IRON GRILL ABOVE WALL NEAR PSI AND TIOLET IN PRINCPAL OFFICE (DAPPS) AT PALAMPUR MIL STN.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. (Manual excavation)

M&L plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete, complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed.

S&F rolled mild steel sections like angle, channel, flat, square bars etc as inframed work such as grills, gratings, etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed.

M&L for preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L keyed pointing to brick work of walls in cement mortar 1:4 complete all as specified and directed.

M&L rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point where directed complete all as specified and directed.

S&F vitreous china, wash basin flat back, with pedestal white of size 615mm x 445mm x 835 mm including brass Chromium Plated waste coupling 32mm size with long screwed shank and fly nuts, flange end bedded in red lead cement, PVC medium grade 32mm size waste pipe, PVC connection 15mm size, 450mm long with PTMT nuts at both ends complete all as specified and directed.

S&F Brass chromium plated mixer for mixing hot and cold water for wash hand basin, screwed down for iron pipe for 15mm dia bore pipe complete all as specified and directed.

S&F one piece EWC vitreous china wash down water closet pan (including inbuilt vitreous china low level flushing cistern 10 litre approximate size 645mm x 355mm x 725mm) including plastic water closet seat cover white complete all as specified and directed.

S&F Health Faucet for WC of any description, brass chromium plated with flexible pipe of 90 cm in length complete all as specified and as directed.

S&F 15mm bore stop valves/angle cock (two way if required), brass chromium plated concealed type, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps,complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F PVC (SWR) 110mm bore, floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F fancy type, chromium plated, bib tap, cast copper alloy with quater turn flange, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F brass chromium plated soap dish of standard size fixed to plugs with chromium plated brass screw, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.

S&F steel water tubing, 15mm bore dia, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed.

S&F PVC bathroom mirror cabinet of size 500x400mm (minimum) complete of approved make complete all as specified and directed. Make: Prayag Cat Part No. 556 or equivalent as approved by GE.

S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular ) area of each tiles each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) 25mm thick as in sub base of flooring, leveling course of flooring or levelling course of roof etc, complete all as specified and directed.

M&L plain cement concrete 1:4:8, type D-2 as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in for 100/110mm bore pipe, complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beadaing for glazing/paneling, C.P brass/stainless steel screws, complete all as specified and directed.

S&F 6mm thick aluminium composite panel with decorative sheet on both sides suitably fixed in aluminium/M.S angle framework (fixed in any position as per site requirement) complete all as specified and directed.

BHARDWAJ BUILDERS

Kesari Enterprises

M/S PARVEEN ENTERPRISES

M/S THAKUR ENTERPRISES

MM Constructions

PrithviRaj Enterprises