Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹3.1 L
Closing Date
21 Oct 2026, 4:30 pm
Karnataka Neeravari Nigam Limited
GURURAJ C
Providing CC Lining in between Km 9.10 to 10.80 under distributary no 16A of RBHLC including Improvements to structures.
KNNL/2025-26/IW/WORK_INDENT3407/CALL-3
KNNL/2025-26/IW/WORK_INDENT3407/CALL-3
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
KNNL Division Canal Div No 6 Bellary
9 documents required · 9 mandatory
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have executed in any one financial year the following minimum quantities of work usually 80 percent of the peak annual rate of construction during the last five years 2020-21 to 2024-25 work done certificate should be obtained duly signed from an officer not below the rank of EE, Steel-23.67 Tonne, CNS/Murrum for Embankment-6043.23cum, Mechanical Paver for canal lining -11064.40 sqm, Concrete M15 and Above-216.52 cum
The bidder should have satisfactorily completed not less than 90 percent of contract value, atleast one similar nature of work as Providing CC lining for canals including irrigation structures not less than Rs.123.47 Lakhs during last 05 years 2020-21 to2024-25.Work done certificate should be obtained signed from officer not below rank of EE of concerned division and countersigned by SE of same circle should be uploaded.Cost of work executed in previous yearswill be updated to 2025-26 at 10percent/annum
A copy of the KPWD Class-II & above Contractor Registration Certificate with validity. (Active in period)
Liquid asset and/or availability of credit facilities of not less than for Rs. 74.09 lakhs unconditional credit lines/ letters of credits / certificates from nationalized banks for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks in prescribed format
The annual turnover from all classes of civil works should be costing not less than Rs.493.89 Lakhs in any of Two financial years during last five years,2020-21 to 2024-25. Audited profit and loss account certified by a practicing Chartered Accountant along with copy of income tax returns filed for years indicated above should be furnished, duly mentioning UDIN on Turnover certificate from CA. Annual turnover of Pervious Year shall be updated to 2025-26 at 10percent/annum
Latest copy of the Income tax returns (ITR-V) filed duly mentioning PAN number for the Financial year 2024-25 (Assessment Year 2025-26).
Copy of Valid Employees Provident Fund Registration Certificate
Copy of Valid GST Registration Certificate
Bid Capacity -Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under - Assessed available tender capacity- AxNx1.5-B
₹5,000
₹3.1 L
16 Sept 2026
16 Sept 2026
22 Oct 2026
6 Oct 2026
15 Oct 2026
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness complete as per directions of engineer in charge of work. By Mechanical Means using Dozer In area of light jungle . Complete as per directions of Engineer in charge of work.
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other ancillary operations complete. In dry condition complete as per directions of engineer in charge of work.
Providing cohesive non-swelling ( CNS ) soil lining to canals using soil from borrow area including cost of all materials, labour, machinery, spreading soil in layers of thickness not more than 150 mm, breaking clods, levelling, watering, compacting to density control of not less than 95 percent or as stipulated, dressing to required profile and all other ancillary operations complete.complete as per directions of engineer in charge of work.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.complete as per directions of engineer in charge of work.
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour,all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete. complete as per directions of engineer in charge of work.
Providing and laying insitu vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete.complete as per directions of engineer in charge of work.
Providing and laying insitu vibrated M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour,cleaning, batching, mixing, formwork, supports, placing in position, levelling, vibrating, finishing junction of bed and sides to required curvature, finishing side slopes, curing with all other ancillary operations complete.complete as per directions of engineer in charge of work.
Providing and laying 80 mm thick in-situ M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and vibratory cylinder type mechanical paver including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, forming contraction joints, fixing PVC joint sealing strips, finishing, curing, shifting of paver from one side to other side of canal with all other ancillary operations complete. complete as per directions of engineer in charge of work.
Dismantling, shifting and re-erecting mechanical concrete paver and DG set with all accessories across canal CD work or such other locations where dismantling, shifting, re-erecting and aligning of paver is necessary for continuing further canal lining work including cost of all materials, machinery, labour and all other ancillary operationscomplete. Note: The rate under this item shall not be considered for local shifting of paver from one side to other side of canal. The cost of local shifting of paver is included in concrete lining rates under item No. 3.23.1, 3.23.2, 3.24.1 and 3.24.2 complete as per directions of engineer in charge of work.
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm dia holes and all other ancillary operations complete. 50 mm diameter and 125 mm long complete as per directions of engineer in charge of work.
Providing and forming 350x 350 x 400 mm deep filter drain consisting of 75 mm thick 10 mm down coarse aggregate layer around pressure relief pipe and 75 mm thick sand layer around coarse aggregate layer including cost of all materials, labour, excavation of pit and all other ancillary operations complete. complete as per directions of engineer in charge of work.
Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations complete. 20 mm thick 80 mm depth complete as per directions of engineer in charge of work.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates. complete as per directions of engineer in charge of work.
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) complete as per specifications and as per directions of Engineer-in-charge.
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete as per directions of engineer in charge of work.
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (COMMON SR 2023-24, Vol-1, Sl.No.2.5.2, P.No 16) complete as per directions of engineer in charge of work.
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification 2.11.f (Canal & Allied Works) complete as per directions of engineer in charge of work.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
3407 Drawings.pdf
Others - Drawings • 1.46 MB
3407 BOQ CALL 3.xlsx
Others - BOQ • 0.02 MB
3407-bid document CALL3.docx
Tender Document • 10.90 MB
3407 Tender Notification-works -Call 3.docx
Others - Tender Notification • 0.05 MB
specifications.pdf
Others - Specifications • 0.68 MB
addendum 1 final.pdf
pdf • 1.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .