SPECIAL REPAIR TO BLDG NO P 16 P 17 P 18 ORs MD ACCN AT NCC BN HALDWANI UNDER GE RANIKHET

Amount

BOQ ( Sch A ) B/R Works Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

All as per item No 01 above but of any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for PCC (1:4:8 ) type D-2 (using 40mm graded stone aggregate) as in sub base finished even and rough complete all as specified and directed.

M&L for concrete concrete chequered tile of size 20cm x 20cm x 25 mm thick with white cement & pigment, set, jointed and pointed in neat cement slurry in floors, laid over with and including 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in bays including all necessary form work & finishing surface even & smooth without using extra cement complete all as specified and as directed.

M&L for providing PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops rouded or chamfered on edges, chhajja coping etc complete all as specifed and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in level course finshining cement concrete surface even and fair complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), 40 mm thick as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M & L for 50mm thick (laid in two equal layer of 25 mm thick each) in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including finishing even and fair as in roof padding and preparing surface to receive treatment complete all as specified and directed.

S & F 1.4mm dia galvanised steel wire netting 20mm X 20mm mesh size , made up into matteresses or cages, lapped , wired and laid in position ,incl fixed with tinned tacks of wire staples complete all as specified and directed.

M&L for removing of existing roof treatment any type and applying APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm complete all as specified and directed.

M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over with and including a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down bedding layer in cement mortor and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles, 10 mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over with and including screed bed of 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exc 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over with and including screed bed or bedding layer of 10mm thick in CM 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over with and including back coat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Marble work ( Udaipur green ) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl rounding off edges and bull noosing of all external edges incl punching of holes in the slab for passing of gas pipe , area of marble slab should not less than 1.00sqm to be checked over 15mm thick screed bed in CM 1:6 complete all as spcified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per item No 20 above but exc 1.50 sqm but n.exc 4.00sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed.

S&F 2nd class hard wood , 35mm thick glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(without sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) shutter complete all as specified and directed.

M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast and other simillar work including necessary form work complete all as specified and directed.

S&F mild steel flat iron 25x3mm thick for hold fast complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete all as specified and directed.

S &: F aluminium anodized barrel tower bolts of extruded section length of bolts 150mm complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

S & F aluminium handle, cast type anodized 150mm size complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made of 5mm wood grain printed colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F MS steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded with and including applying two coat of synthetic enamel paint over a coat of red-oxide etc complete all as specified and directed.

S&F MS steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded with and including applying two coat of synthetic enamel paint over a coat of red-oxide etc complete all as specified and directed.

S&F MS steel ventilators with top hung shutters incl hinges steel peg stay, with and including 3mm thick figured glass pin headed type glass pane, wire mess and applying two coats of sythetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

S&F in repair figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and directed.

S&F mild steel wire cloth, 56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks and wooden beading around complete all as specified and directed.

S&F in repair mild steel wire cloth, 56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks and wooden beading around complete all as specified and directed.

M&L for applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer over 10cm width or girth including preparation of old painted steel surface complete all as specified and directed.

M&L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M &L for applying one coat of synthetic enamel paint to wooden surface exc 10cm width or girth to old painted surface incl preparation of old painted surface complete all as specified and directed.

M &L for applying one coat of synthetic enamel paint to steel surface exc 10 cm width or girth to old painted surface incl preparation of old painted surfaces complete all as specified and directed.

S&F in repair Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed.

S&F in repairs 18mm thick veneered decorative plywood , grade - 1 (with BWR resin ) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved including external teak wood lipping complete complete all as specified and directed.

S&F in repairs Push to open Magnetic Catches for kitchen cabinet doors as approved by GE complete all as specified and directed.

S&F in repairs Stainless sensys soft close 0 crank concealed slide on cabinet Hinge, a base of 12.5 (crank 0 degree) with mounting plate (shutter thickness 15-24mm) complete all as specified and directed

S&F in repairs Stainless Steel Decorative Cabinet Handle 100 mm complete all as specified and directed

M & L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use complete all as specified and as directed.

All as per Item No. 51 above but for 20mm dia (Bore) complete all as specified and directed.

Supply and fixing Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all GI Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation complete as all specified and as directed.

All as per Item No. 53 above but for 20mm dia (Bore) complete all as specified and directed.

Dismantling water tanks ( any description ) of capacity exc. 250 & n.exc 500 ltr complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 750 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type CP bib taps cast copper alloy with crutch or butter flyhandle, screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

S & F in repair stop valves /angle valves chromium paled , fancy type screwed down with crutch handles screwed both ends for iron pipe of bore 15mm complete all as specified and directed.

S&F in repairs 15mm bore brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete all as specified and directed.

S&F in repairs Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed.

S & F in repairs stainless steel sink with draining board made out of 10mm thick sheet for kitchen with plug, washers , waste pipe, cast iron cantilever bracket connecting union, overall size 915 x 460mm with bowl size 410 x 330 x 160mm complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 20mm dia tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed.

S&F in repair Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed

S&F in repair Corner Glass Shelf 300mm (with ABS Brackets) 300 x 300mm as approved by GE complete all as specified and directed.

S&F in repair Peg Set of 6 Stainless Steel as approved by GE complete all as specified and directed.

S&F in repair Soap Dish Stainless Steel complete all as specified & directed.

S&F in repairs vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 450mm x 300mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

S&F in repair PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed complete all as specified and as directed.

Dismantling of PVC / CI pipe 100/110 mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed.

M&L for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc complete all as specified and as directed.

Dismantling of PVC / CI pipe 75mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed.

M&L for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc complete all as specified and as directed.

S & F CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

S & F CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

S & F CI spun pipe branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.

S & F CI spun pipe branch piece 75mm bore, single (eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.

S & F CI spun fittings floor tarps of size 75mm with grating including jointing to CI pipe with lead joint all as specified and as directed. complete fixed in repair incl making joint water tight complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub class `B’ old size bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class `B’ old size bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone or precast PCC block walls etc raking out joints hacking for key scrabbing down water etc complete all as specified and directed.

M&L for Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Work or Concrete Surfaces, finished Fair and Even mixing with WPC as per Manufacturer Instructions, complete all as specified and as directed. (Note: WPC will be measured and paid seperately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on fair faces or concrete ceiling surfaces finished even and fair complete all as specified and directed.

M&L for preparation of new/untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including preparation of newly plaster surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm ) over a priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed

M&L for preparation of plastered or un-plastered old decorated wall/ceiling surfaces and applying two coat of distemper oil emulsion after removal of old /existing treatment complete all as specified & directed.

M&L for preparation for applying one coat of exterior emulsion paint (as per manufacturer's instruction) on old decorated surface of wall to match the existing surface including preparation of old decorated surface complete all as specified and directed

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed.

Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed.

Return fillingin, including spreading , levelling , watering and well ramming in layers not exc 25 cm thick in hard/dense soil compleate all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar compleate all as specified and directed.

M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) compleate all as specified and directed.

M&L for RCC 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in slab supported on walls,shelf,beams and columns in floors,roof, landing, balconies with and incl necessary formwork complete all as specified and directed (reinforcement shall be measured separately)

M&LPrecast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement shall be measured separately)

S&F mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia complete all as specified and directed.

S&F in repair stainless steel plate rack of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; for window and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F MS Rolled sections channel ,angle ,Tee section and in tubular and hollow section as in main and cross beams, hip and jack rafters; purlins,post and trusses where connected to common rafters and running rails and embbeded in concrete complete all as specified and directed.

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L for Cutting or uprooting grass on old mud phuska, removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster complete all as specified and directed.

BOQ ( Sch A ) E/M Works Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm (FRLS) multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No. 114 above but one socket outlet 5 Amps on the same board.

All as per item No.114 above but one 3 pin socket outlet 5 Amps independent.

All as per item No.114 above but one bell point controlled by one bell push switch.

All as per item No. 114 above but with FRLS 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket.

Supply & Fixing lamp holder PVC insulated body with back plate for angle/battern fitting complete all as specified and directed

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole 15 Amp complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

Supply & Fixing Bell push ,flush type , 5 Amp complete all as specified and directed.

Supply & Fixing steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fixing bell Ding Dong type AC 230 volts, 50 Hz complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 4 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours complete all as specified and directed.. Make Havells cat pat LUMILINEBS20WLED865SPCWH or equivalent of phillips/wippro/Bajaj complete Note:- The contractor shall submit minimum 2 year warrenty of material from manufracturer of LED tube light.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete all as specified and directed. Note:- The contractor shall submit minimum 2 year warrenty of material from manufracturer of LED tube light.

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings frame & louvers including cutting of side as per required size, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

S & F exhaust fan made of sturdy Engineering plastic type ISI Mark, copper winding of sweep 300 mm size complete with louvers including cutting opening through brick/stone /PCC block wall, making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accessories including cutting of holes as per required size complete all as specified and directed.

S & Fixing LED Bulb 9 watt complete all as specified and directed. Note:- The contractor shall submit minimum 5 year warrenty of LED bulb from manufracturer.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories (incl ceiling clamp/hook fixing in ceiling/roof with fashner/nut & bolts), 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and directed

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Havells cat pat HEXAFT10WLED857SSYMBOPC or equivalent cat part in make phillips/wippro/Bajaj & C&S . Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply and fix water heater storage type electric supplied and installed complete of capacity 25 ltrs, 2 KW BEE 5 star rated including making connection with industrical socket, ultra thick SS inner tank of superior 304 grade, Fire retardant ISI Mark supply cord, Rust & shock proof ABS body, Compact & easy to install and proper hanging on nut bolts washers grouted on wall and PVC pipe for connection of hot and cold water complete all as specified and directed. Make - Bajaj/Racold/Havells and equivalent make as specified in particular specifications.

Supply and fixing post top lantern LED type 20 Watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed . Note:- Contractor shall submit 2 year warrenty of material from manufracturer alongwith purchase voucher.

Supply and fixing or passing through pipe, stranded conductor 4 Sqmm, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers no more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or circular etc all as specified and directed.

Supply and Fixing steel tube Light grade galvanised 25 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed.

Builders Harpal

SS Construction Co

M/S S R Construction

M/s RK JOSHI&SONS

M/S Rajeev Sharma and Co.

aditya construction

M/S VIJAY TRADERS