Job No.1082/2025 (HEW) Work for Providing and fixi...

26.58.1 Supply and installation of garden bench 1 Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications.

26.58.3 Supply and installation of garden bench 3 Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1:2:4 cement concrete (Minimum weight of each bench 105 kg). All materials required to be as per BIS specifications.

26.62 PCC tree-guard with appropriate reinforcement with MS bars of 8mm, 6mm and 4mm, having four panels of equal size and specification, consisting of overall height of 1800 mm and overall width of 620 mm including all carriage. All materials required to be as per BIS specifications.

26.76 Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.

Job Work Chain Swing :- Providing and fixing chain swing of size 10' long x 9' high (above ground) frame is made of M.S. pipe 2" B class which stay with M.S. pipe 1" B class frame is connected with M.S. road 25 mm dia shaft having fabricated ball bearing no. 3204 shaft, further having 2 no. seating belt type seat welded with 8mm thick M.S. complete with painting and fixed in cement concrete block of size 12" x 12" x 15" into 4 legs in mixing of ratio 1:2:4 complete in all respect of entire satisfaction of engineer-in-charge.

Job Work Slide:- Providing and fixing of slide 12' long x 16" wide x 5' high (above ground) slide is made of S.S. sheet 18 SWG mounted on M.S. angle 40 x 40 x 4 mm slide 2 no vertical support of M.S. pipe I" B class ladder having climbing steps of pipe 1/2 "B class complete with painting and to be fixed in Ce blocks 12" x12" x15" in to 4 legs of mix in ratio 1:2:4.

Job Work Sea-Saw:- Providing and fixing of setter sea-saw frame made of 2" Dia MS Pipe, 5" long and 1'-6' height of ground level with 4 Nos of Sea-Saw plunks with 1½" MS Pipe, 8' long sheet made with 16 gauge painted with Ist quality paint and fixing with concrete block 1:2:4 ratio.