Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-Finance | ₹2.1 L | L1 | Accepted-Finance Low quoted bidder |
| 2 | L2₹2.4 LRejected-Finance | ₹2.4 L | L2 | Rejected-Finance High quoted bidder |
| Sl No | Description | Qty | Unit | TVPM UNEMPLOYED CONTRACT CO-OPERATIVE SOCIETY L1 | SMEERAJ B S L2 |
|---|---|---|---|---|---|
| 1.00Appendix A | |||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 380.88 | kg | 198.59 ₹75,638.96 | 185.35 ₹70,596.11 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 32.7 | sqm | 168.52 ₹5,510.60 | 157.29 ₹5,143.38 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 96 | kg | 597.71 ₹57,380.16 | 820 ₹78,720 |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 82.2 | kg | 723.98 ₹59,511.16 | 820 ₹67,404 |
| 1.00 | OD280753/2024-2025:
Providing and fixing 3mm thick Aluminium Composit Panel with minimum thickness of Aluminium layer of Woodden pattern on both sides 0.25mm (ALU DECOR / ALSTRONG / EUROBOND / ALSTONE / VIRGO / equivalent) fixed with CP Brass/steel screws and jointed with Silicon in the joints and for covering the screws for false ceiling/panelling in doors and windows/cupboards/partitions etc. including all materials, labour charges, hire charges etc. complete as per the direction of Engineer in charge | 5.88 | sqm | 1,774.1 ₹10,431.71 | 2,690 ₹15,817.20 |
| 1.01 | OD280247/2025-2026:
Blacksmith 1st class engaging maintenance and changing fittings of grill doors , windows and gates | 2 | each | 1,344.62 ₹2,689.24 | 1,500 ₹3,000 |
Tender Value
₹2.1 L
EMD Value
₹5,279
Closing Date
20 Mar 2026, 12:00 pmClosed
The Assistant Executive Engineer Medical college
Office of The Assistant Executive Engineer, Medical college sub division, PWD Thiruvananthapuram 695033
DEPOSIT Providing shelves and racks in the store room and labs and tile works in the Department of Oral Pathology attached to Govt. Dental College Thiruvananthapuram -WorkGeneral Civil Work
2026_PWD_847165_1
PWD/BLDG/TR/4348/2025_5_1_1/1
Open Tender
Civil Works - Buildings
180 days
Dental College Thiruvananthapuram
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹5,279
Yes
29 May 2026
13 Mar 2026
23 Mar 2026
13 Mar 2026
20 Mar 2026
13 Mar 2026
Appendix A
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
OD280753/2024-2025: Providing and fixing 3mm thick Aluminium Composit Panel with minimum thickness of Aluminium layer of Woodden pattern on both sides 0.25mm (ALU DECOR / ALSTRONG / EUROBOND / ALSTONE / VIRGO / equivalent) fixed with CP Brass/steel screws and jointed with Silicon in the joints and for covering the screws for false ceiling/panelling in doors and windows/cupboards/partitions etc. including all materials, labour charges, hire charges etc. complete as per the direction of Engineer in charge
OD280247/2025-2026: Blacksmith 1st class engaging maintenance and changing fittings of grill doors , windows and gates
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1431572.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
mergedsbdretender.pdf
Tender Documents • 1.62 MB
epaymentform.pdf
Other Document • 0.06 MB
BOQ_1431572.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid