Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-Finance | L1 | Accepted-Finance LOWEST | |
| 2 | L2₹42.1 L+₹1.5 L (3.73%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹48.2 L+₹7.6 L (18.8%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER |
Tender Value
Refer Docs
Closing Date
21 May 2025, 2:00 pmClosed
Executive Engineer
76, Dr. Sundari Mohan Avenue, Kolkata - 700014
Repair and Renovation of pond based water harvesting system at Gosaba Rural Hospital in the District of South 24 Paraganas.
2025_WBPWD_841404_1
01/EE/SOUTH 24 PGS/SS/PWDTE OF 2025-2026
Open Tender
SUPPLY OF CIVIL GOODS/EQUIPMENTS
Item Rate
90 days
Gosaba Rural Hospital
Please refer Tender documents.
4 documents required · 4 mandatory
Exempted
4 Jun 2025
2 May 2025
23 May 2025
7 May 2025
21 May 2025
7 May 2025
Amount
Raw Water Lifting Pumps Supplying, Installing, Testing & Commissioning Of Horizontal Foot-Mounted Self Priming Mono-Block Motor Tefc Ip55 Pumps As Per Specifications For Feeding Of Raw Water From Pond To Settling Tank. Continuous Rating Close Coupled To Pump. Insulation Class 'F'. Rpm To Suit Discharge & Tdh. Discharge Capacity = Approx 30.0 M³/Hr [8.333 Lps] At 12 Mwc. Range Of Operation Between 8 - 12 Mwc. Including Level Sensors, Ss Strainer Basket And Footvalve 90mm Dia. Capacity Of Pump Should Be 2hp To 3hp. Also Cable Sections Shall Be 4 Core X 4 Sqmm, Approx 25mtr, The Cables Is To Be Supplied With All Eyelets, Termination Accessories, Cable Jointing Epoxy Compound With Appropriate Join Boxes Etc Complete. It Is To Be Noted That The Mcc Will Be A Little Away From The Wtp. All Jointing Boxes Shall Be Fully Waterproof. As Far As Practicable There Shall Be No Join Boxes From Mcc To Above Ground Motors. Join Boxes Will Be Allowed For Submersible Motors. Mcc Will Be Inside Shed Nearby. As Per Approved Drawing And Design Complete. (Fixing In The Pond) Make: KSB / KIRLOSKAR
Filter Feed Pumps Supplying, Installing, Testing & Commissioning Of Horizontal Foot-Mounted Self Priming Mono-Block Pumps For Filter Feeding Of Clarified Water Cum Backwashing With Filtered Water, All Cast Iron Pumpset With Double Mechanical Seal, Motor Is To Be Ip:68, Tefc, Sq.Cage Of Suitable Kw. Continuous Rating Close Coupled To Pump. Insulation Class'f'. Rpm To Suit Discharge & Tdh. Discharge Capacity = Approx 30.0 M³/Hr [8.333 Lps] At 22 Mwc. Range Of Operation Between 18 - 22 M Mwc [Approx]. Minimum Solids Handling Size = 3 Mm. Flooded Suction. Level Sensor - 1 No For Pumps Is To Be Provided By Us To Avoid Dry Running Of Pumps. Discharge Pipe 50 Mm Dia With Control Valve Up To Filters To Be Considered. 2 Pumps To Be Installed In The Treated Water Tank. These Will Be Meant For Backwashing. Capacity Of Pump Should Be 2hp To 3hp. Also Cable Sections Shall Be 4 Core X 4 Sqmm Approx 25mtr, The Cables Is To Be Supplied With All Eyelets, Termination Accessories, Cable Jointing Epoxy Compound With Appropriate Join Boxes Etc Complete. It Is To Be Noted That The Mcc Will Be A Little Away From The Wtp. All Jointing Boxes Shall Be Fully Waterproof. As Far As Practicable There Shall Be No Join Boxes From Mcc To Above Ground Motors. Join Boxes Will Be Allowed For Submersible Motors. Mcc Will Be Inside Shed Nearby. As Per Approved Drawing And Design Complete. (Fixing At Plant Room, Suction From Settling Tank And Delivery To Mgf & Acf Filter Vesse). Make: KSB / KIRLOSKAR
Filtered Water Lifting Pumps Supplying, Installing, Testing & Commissioning Of Horizontal Foot-Mounted Self Priming Mono-Block Pumps For Filter Feeding Of Clarified Water Cum Backwashing With Filtered Water, All Cast Iron Pumpset With Double Mechanical Seal, Motor Is To Be Ip:68, Tefc, Sq.Cage Of Suitable Kw. Continuous Rating Close Coupled To Pump. Insulation Class'f'. Rpm To Suit Discharge & Tdh. Discharge Capacity = Approx 30.0 M³/Hr [8.333 Lps] At 12 Mwc. Range Of Operation Between 8 - 12 M Mwc [Approx]. Minimum Solids Handling Size = 3 Mm. Flooded Suction. Level Sensor - 1 No For Pumps Is To Be Provided By Us To Avoid Dry Running Of Pumps. Discharge Pipe 50 Mm Dia With Control Valve Up To Filters To Be Considered. 2 Pumps To Be Installed In The Treated Water Tank. These Will Be Meant For Backwashing. Capacity Of Pump Should Be 2hp To 3hp. Also Cable Sections Shall Be 4 Core X 4 Sqmm Approx 25mtr, The Cables Is To Be Supplied With All Eyelets, Termination Accessories, Cable Jointing Epoxy Compound With Appropriate Join Boxes Etc Complete. It Is To Be Noted That The Mcc Will Be A Little Away From The Wtp. All Jointing Boxes Shall Be Fully Waterproof. As Far As Practicable There Shall Be No Join Boxes From Mcc To Above Ground Motors. Join Boxes Will Be Allowed For Submersible Motors. Mcc Will Be Inside Shed Nearby. As Per Approved Drawing And Design Complete. (Fixing At Plant Room , Suction From Filtered Water Tank And Supply To Hospital). Make: KSB / KIRLOSKAR
Butterfly Valve Supplying, Installing, Testing & Commissioning Of Butterfly Valve 100mm Dia [Class Pn16, Maximum Service Pressure 16 Bar, Service Temp. Range -20 Deg. C To +100 Deg. C, Body Aluminium Die-Cast / Equivalent Astm B85-84-383.0, Neck Stainless Steel, Disk A351 Gr.Cf8m, O-Ring Epdm, Rubber Sheet Epdm, Bottom Seam - Equivalent Astm A276 Type 410, Bearing - Polyphenylenesulfide (1 1/2" - 8")]. Flocculator Valve Is Not Included Here). As Per Approved Drawing And Design Complete. (Fixing At All Pumps And Filter Vessel Input And Output Line) Make: Kitz / KSB / Zoloto
Wafer Type Check Valve Supplying, Installing, Testing & Commissioning Of Wafer Type Check Valve 100mm Dia [Class Pn16, Maximum Service Pressure 16 Bar, Service Temp. Range -20 Deg. C To +100 Deg. C, Body Aluminium Die-Cast / Equivalent Astm B85-84-383.0, Spring Stainless Steel, Disk Bronge, O-Ring Epdm]. (Flocculator Valve Is Not Included Here). As Per Approved Drawing And Design Complete. (Fixing At All Pumps Delivery Line) Make: Kitz / KSB / Zoloto
Venturi System SUPPLYING, INSTALLING, TESTING & COMMISSIONING OF STAINLESS STEEL VENTURI SYSTEM 100MM DIA COMPLETE WITH ALL NECESSARY EQUIPMENT. AS PER APPROVED DRAWING AND DESIGN COMPLETE. (FIXING AT RAW WATER LIFFITING PUMP DELIVERY LINE). Make: API
Flocculator Supplying, Installing, Testing & Commissioning Of Pipe Coil Flocculator Including Of All Necessary Items That's 80mm Dia Pipe, 80mm Dia Elbow, Chemical Injector, Controlling Valve, Or Chemical For Alum Dosing, Ph Gainer In Raw Water Delivery Pipeline For Proper Mixxing The Chemical. Coil Length Should Be 6mtr 100mm Dia. There Will 3nos 100mm Butterfly Valve 3nos Injector For Ph, Chlorine And Alam Or Polyelectrolyte. As Per Approved Drawing And Design Complete. (Fixing At Middle Of The Raw Water Pump And Settling Tank) Make: Finolex / Supreme
Alum Dosing System Supplying, Installing, Testing & Commissioning Of Alum Dosing System Complete With 1 No. 200 Litre Ss Fabricated Tank; Connecting Pvc Or Pp Pipes From Dosing Tank Up To Raw Water Delivery Line. As Per Approved Drawing And Design Complete. (Fixing At Pump Room Delivery To Raw Water Pump Delivery Line. Make: Fabricated
Chlorine Dosing System Supplying, Installing, Testing & Commissioning Of Hypochlorite Dosing System Complete With Hypochlorite Dosing Pumps (6 - 10 Lph)- 2 Sets; 1 No. 200 Litre Hdpe Tank; Connecting Pvc Or Pp Pipes From Dosing Tank Up To Fwt. Hypochlorite Solution Of Approximately 15% Chlorine Will Be Manually Fed Into The Dosing Tank. The Dosing Pump Will Dose The Solution Into The Fwt At Required Rate. Pumps Will Be (1w+1s). Cable Sections Shall Be 3 Core X 1.5 Sqmm 12 Mtr, The Cables Is To Be Supplied With All Eyelets, Termination Accessories, Cable Jointing Epoxy Compound With Appropriate Join Boxes Etc Complete. It Is To Be Noted That The Mcc Will Be A Little Away From The Wtp. All Jointing Boxes Shall Be Fully Waterproof. As Far As Practicable There Shall Be No Join Boxes From Mcc To Above Ground Motors. Join Boxes Will Be Allowed For Submersible Motors. Mcc Will Be Inside Shed Nearby. As Per Approved Drawing And Design Complete. (Fixing At Plant Room, Suction From Dosing Tank And Delivery To Acf Filter Outlet Line).Make: E-Dose/ Asia-Lmi/ Grundfos
Fabrication Work Re-Fabricating Of Exiting 3nos Ms Vessels Shell (6mm Thickness, 1mtr X 1mtr) Including Of Cutting, Welding, Rubbing, Painting And Net Fixing. Also 6mtr Pipe Line Is To Be Repaired Cutting, Welding, Rubbing And Painting. The Inside Will Be Primer Coated & Painted With Non Poisonous Bituminastic Drinking Water Quality Paint 1+1 Coats . And The Outside Will Be Painted With 1 Coat Of Zinc Rich Epoxy Primer & 1 Coat Of Epoxy Shop Paint Of Approved Shade. Thereafter 1 Coats Of Finishing Epoxy Paint Will Be Applied After Erection & Commissioning. BRAND - JINDAL Make: Posh / Fabricated
MGF Media Supplying, Installing, Testing & Commissioning Of Mgf Filter Media Including Of Exting Media Clean Out And New Media Refilling (Sand And Gravel). Sand (0.5-1mm) : 1.76 M3 Sand (1-2mm) : 1.29 M3 Gravels (2-4mm) : 0.93 M3 Gravels (6-12mm) : 0.70 M3 Gravels (12-25mm) : 0.58 M3 As Per Approved Drawing And Design Complete. Make: Global / Barakar
ACF Media Supplying, Installing, Testing & Commissioning Of Acf Filter Media Including Of Exting Media Clean Out And New Media Refilling (Coartz And Activated Media). (1.76 M3) Make: Chemtex Or Ion-Exchange
Treataqua (BID ID -6428944)
Energie (BID ID -6429050)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .