Comprehensive maintenance of buildings including providing service of man power for day to day maintenance work and supplying of materials for both ITI Vivek Vihar including Residential Qter under jurisdiction of KKD Court Divn under SD M-2314.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:

1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement :6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6(1 cement : 6 coarse sand)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :

Red sand stone - exposed face fine dressed with rough backing : 30 mm thick

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing to existing door frames.

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:

4.0 mm thick glass panes

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.

Red sand stone

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

12 mm cement plaster of mix:

1:4 (1 cement: 4 coarse sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba to dumping ground notified by MCD Delhi within any lead all complete as per direction of Engineer- in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish to dumping ground notified by MCD Delhi within any lead, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba to dumping ground notified by MCD Delhi within any lead all complete as per directions of Engineer-in-Charge.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.

Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material within 50 metres lead and disposal of unserviceable material to dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.

For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground notified by MCD Delhi within any lead as per direction of Engineer-in-charge.

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground notified by MCD Delhi within any lead and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain board : 510x1040 mm bowl depth 250 mm

Kitchen sink without drain board : 610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm nominal dia Pipes

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

L D- 2.5 : Rectangular shape 600x450 mm internal dimensions

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge.

With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles

Supplying of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete as per manufacturer's specification etc. all complete as per direction of Engineer-in-charge.

Supplying of water thinnable cement primer having VOC content less than 50 gram/litre of approved manufacturer all complete as per manufacturer's specification etc. all complete as per direction of Engineer-in-charge.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (Labour Rate only excluding the cost of material).

Supplying of Acrylic Smooth exterior paint of approved manufacturer and brand of required shade and colour as per manufacturer's specification etc. all complete as per direction of Engineer-in-charge.

Supplying of Acrylic Exterior Primer of approved manufacturer all complete as per manufacturer's specification etc. all complete as per direction of Engineer-in-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). (Labour Rate only excluding the cost of material).

Supplying of synthetic enamel paint of approved manufacturer, of required shade and colour complete, as per manufacturer's specification etc. all complete as per direction of Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (Labour Rate only excluding the cost of material).

Supplying of white cement based putty of approved brand and manufacturer as per manufacturer's specification etc. all complete as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Labour Rate only excluding the cost of material).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (Labour Rate only excluding the cost of material).

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). (Labour Rate only excluding the cost of material).

Supplying & stacking of following materials at site/Enquiry Office of approved make:

8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.

18 mm thick block board with commercial ply veneering on both side

Ply wood 5 ply with commercial ply on both faces 6 mm thick

Portland Cement (OPC-43 Grade)

Coarse sand (zone III)

Sand zone V (Jamuna)

Stone Aggregate (Single size) : 25 mm nominal size

White Cement

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe)

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts

C.P. Brass bibcock 15 mm

15 mm PTMT bib cock with flange (fancy)

C.P. Brass angle valve 15 mm

PTMT Angle Stop cock with Flange 15 mm

Anodised Aluminium sliding door bolt 250x16 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Anodised Aluminium tower bolt (barrel type) 150x10 mm

Aluminium hanging floor door stopper with twin rubber & stopper

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia

PTMT Pillar cock (fancy) 15 mm foam flow

C.I. bracket for wash basin and sinks

Vitreous china flat back wash basin 450x300 mm

Vitreous china flat back wash basin 550x400 mm

PTMT - Waste Coupling 31/32 mm

SS handle 125mm

Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick

Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia 1.20mm thick

Mirror of superior make glass 60x45 cm

Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)

M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked

M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked

Solvent

White plastic seat (solid) with lid C.P. brass hinges and rubber buffers

Marandi wood in planks

2nd class teak wood moulded beading or Taj beading/ornamental bleading of size 18X5 mm

All drive screws (for gypsum board)

Wooden screws with plastic rawl plugs 35x8 mm

125 mm grating with waste hole

CP Brass Single lever telephonic wall mixer of approved make

C.P. Brass Centre Hole Basin Mixer With Cast Spout

Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm)

ABS overhead shower round 100mm with Brass Arm 225mm with flange

SS Jet Spray

ABS Health Faucet with 1mtr. Tube & Hook

CPVC Ball Valve 20 mm

CPVC Ball Valve 25 mm

CPVC Elbow 20mm

CPVC Elbow 25mm

CPVC Brass Elbow 20x15 mm

CPVC Brass Elbow 25x15 mm

CPVC Tee 20 mm

CPVC Socket 20mm

CPVC Union 20 mm

CPVC Male Adapter (Plastic Threads) 20x15mm

CPVC Male Adapter (Plastic Threads) 25x15mm

CPVC Male Adapter (Plastic Threads) 25x20mm

CPVC Female Adapter (Plastic Threads) 20x15mm

CPVC Female Adapter (Plastic Threads) 25x20mm

CPVC Tank Nipple 20 mm

G.I. Plug 15 mm

G.I. Tee 15 mm

Brass Ball Valve 15mm

Brass Ball Valve 20mm

Brass Ball Valve 25mm

Brass Ball Valve 32mm

Brass Ball Valve 40mm

Brass Ball Valve 50mm

Wash Basin Fastner 10mm

G.I. Nickel Pipe Hook

PVC Socket 75 mm

PVC Gitti 6mm

Hacksow Blade

Brass Concealed Stop Cock 15mm

Glass Putty

Mild Steel Nails Headless 17 No. 1"

Mild Steel Nails Headless 14 No. 1"

Cobbler Nails 1"

S.S Sink Coupling 4"

PVC P-Trap 100x125 mm

Carrying out of welding work by engaging one welder with welding machine and necessary equipment for welding (welding machine, welding rod, cutting wheels and required material if required) including necessary finishing all complete as per direction of Engineer-in-Charge.

Credit and disposal of old damaged and dismantled PVC tank and other plastic and PVC articles (The material will be the property of contractor) Note: Actual weight of the material to be measured for payment.

Credit and disposal of old damaged and dismantled C.P brass fittings and other brass articles (The material will be the property of contractor) Note: Actual weight of the material to be measured for payment.

Credit and disposal of old damaged and dismantled Steel/Iron/M.S/G.I and other similar articles (The material will be the property of contractor) Note: Actual weight of the material to be measured for payment.

Credit and disposal of old damaged and dismantled Aluminium article like fittings and aluminium sections and other similar articles (The material will be the property of contractor) Note: Actual weight of the material to be measured for payment.

Providing/Deploying a SEWER MAN (semi skilled) for attending various sewerman related complaints such as opening and cleaning of choked sewer, drain, manhole, gully traps, road gully chamber, water closets, floor traps, wash basins, kitchen sinks including the vertical stricks, rain water pipes etc. cleaning with acid/biodegradable chemical/detergent whenever required as per satisfaction of occupants and including disposing of silts/malba/waste garbage etc. complete as per direction of Engineer-in-charge. All work is to be attended during 8 hours duty (except Sunday) from 9.00 AM to 5.00 PM attendance to be marked daily on attendance register or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.

Providing/Deploying a PLUMBER (Highly skilled) for attending various complaints pertains to plumber (Skilled) like fixing of water supply related fittings, sanitary related pipes and fittings, flush valve and fittings, connecting geysers, pillar cocks, stop cocks, bib cocks, pipes, waste pipes, flush pipes, cisterns, w.c. pans, mixer of all kinds, showers and all other such fittings etc. complete as per the direction of Engineer-in-charge. All work is to be attended during 8 hours duty (except Sunday) from 9.00 AM to 5.00 PM attendance to be marked daily on attendance register or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.

Providing/Deploying a CARPENTER (Highly skilled) having experience in glass work and aluminium work for attending various carpenter related complaints like adjusting door closer, easing out of doors/windows /ventilators, fixing of fittings & fixtures of doors/windows /ventilators and repairs of wooden partitions, doors, windows etc. complete as per the directions of Engineer-in-charge. All work is to be attended during 8 hours duty (except Sunday) from 9.00 AM to 5.00 PM attendance to be marked daily on attendance register or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.

Providing/Deploying a Supervisor for writing maintenance complaints, issue of required materials to the skilled labours for attending complaints including assigning various works in the complaint daily and supervise them at site etc. complete as per directions of Engineer-in-charge. All work is to be attended during 8 hours duty (except Sunday) from 9.00 AM to 5.00 PM attendance to be marked daily on attendance register or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.

Providing/Deploying a BELDAR/ COOLIE (Unskilled) for keeping and maintenance of various premises and helping to skilled manpower whenever in need and cleaning the outlets of rain water etc. complete as per the directions of Engineer-in-charge. All work is to be attended during 8 hours duty (except Sunday) from 9.00 AM to 5.00 PM attendance to be marked daily on attendance register or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.

Providing/Deploying a MASON (Highly skilled) for attending various mason related complaints like repairing of floors, walls, plaster, ceiling, grading on roof, brick edging, making repairs of holes thereof, masonry jobs in laying of pipes, w.c. pans etc. complete as per the directions of Engineer-in-charge. All work is to be attended during 8 hours duty (except Sunday) from 9.00 AM to 5.00 PM attendance to be marked daily on attendance register or as directed time period in proper uniform. Necessary T & P shall be provided by the contractor.

Providing services of JCB including driver, helper, fuel etc. for lifting/ handling/ transporting job with all lead & lift etc. all complete as per direction of Engineer-in-charge.

Please Enable Macros to View BoQ information