REPAIRS / MAINT AND PAINTING OF CERTAIN STEEL FURNITURE AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Chair Verandah (Officer) (FD/E6/MAP/06) a) M&L for derusting denting of frame to chair verandah applying minor welding wherever required and synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

b) Taking out and removing old U/S worn out PVC Seat and Back & Supply of Fix new PVC Seat and Back of 4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on Seat and back of Chair Varandah.

c) Removing old U/S rubber shoes and S&F new rubber shoes complete all as specified and directed by Engr-in-Charge.

Charpoy IP Steel PlyTop (FD/MAP-II/01) (a) Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy IP Steel PlyTop and supply and fix new 12mm thick commercial plywood fixed to charpoy IP Steel PlyTop with suitable size of screws and washer.

b) M&L for derusting denting of frame of Charpoy IP Steel PlyTop by applying minor welding wherever required and apply black synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Computer Chair MAP (FD/E6/MAP/01) (a) Supply and fixing of Hydraulic system of suitable size and design as per original Pattern including dismantling of old unserviceable one complete all as specified and directed.

(b) Supply and fixing of handle of chair of suitable size and design as per original Pattern including dismantling of old unserviceable one complete all as specified and directed.

(c) Supply and fixing of suitable castor wheel to chairs revolving as per original Pattern including dismantling of old unserviceable one complete all as specified and directed.

(d) Supply and fixing of wheel base including five Nos. of castor wheels to chairs revoling as per original Pattern including dismantling of old unserviceable one complete all as specified and directed.

(e) Taking out the existing old Seat & Back complete from the chair and S & F new Seat & Back complete all as specified and directed by Engr-in-Charge

Table Bed Side MAP (FD/E6/MAP/15, FD/E6/MAP/15(R)) a) Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of table, size as shown on drawing, ISI marked Complete all as shown in drgs and as directed.

b) Removing of old U/S sides of table bed side and S& F of new sides made of 18/19mm thick pre-lamininated particle board all as shown on drg and as directed.

c) Removing of old unserviceable telescopy channel and New fixing removing and smooth movement.

d) Removing of old broken handle and S &F New handle fixing removing smooth movement.

e) Removing old U/S rubber shoes and S&F new rubber shoes complete all as specified and directed by Engr-in-Charge.

f) Preparation of old/new wooden exposed surfaces & MS Pipe by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish on wooden surface & one coat of black synthetic enamel paint on MS Pipe Complete all as shown in drgs and as directed.

Chair Writing MAP (FD/E6/MAP/12) (a) Repairing of existing loose welding point wherever required by spot welding and make it functional in Chair writing MAP

(b) Taking out the existing old Seat & Back complete from the chair and S & F new Seat & Back complete all as specified and directed by Engr-in-Charge

(c) M&L for drestuing and preparing old exposed steel surfaces of Chair Writing MAP and applying one coat of synthetic enamel paint black with spray machine complete all as specified and directed by Engr-in-Charge

Rack Shoes steel (FD/E6/MAP/02(R)) a) M&L for drestuing and preparing old exposed steel surfaces of conduit frame and applying one coat of synthetic enamel paint black with spray machine complete all as specified and directed by Engr-in-Charge

b) Repairing of existing loose jali by spot welding and make it functional complete all as specified and as directed.

c) Removing old unsv rubber shoes and S&F new rubber shoes 04 Nos in each Rack shoes steel complete all as specified and directed by Engr-in-Charge.

Charpoy IP Folding (FD-388(R)) a) Removing of old U/S and broken existing 12mm thick commercial plywood from Charpoy IP Folding and supply and fix new 12mm thick commercial plywood fixed with charpoy with suitable size of screws and washer, in two pieces to facilitate charpoy to be folded complete all as shown in drgs and as directed by Engr-in-Charge .

b) M&L for derusting denting of frame to Charpoy IP Folding applying minor welding and synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Chair School with hand board (FD/E6/MAP/05) a) Removing of old U/S hand board of prelaminated particle board and S&F new pre-laminated partical board with all round teak wood beading as per drawings

b) Removing of old U/S PVC sheet (Seat& Back) S & F New sheets and back of Make- Supreme/Ballowal/Cello/Prince

c) Removing old U/S rubber shoes and S&F new rubber shoes complete all as specified and directed by Engr-in-Charge.

d) Repairing of existing loose jali by spot welding and make it functional complete all as specified and as directed.

(e) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying one coat of white synthetic enamel paint .

Almirah steel Med (FD 67/1032) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 6 lever with duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 6 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/ Silver Grey shade (whichever required for existing shade) of approved quality inside including dents/bends complete all as specified and as directed.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/ Silver Grey shade (whichever required for existing shade) of approved quality outside including dents/bends complete all as specified and as directed.

Almirah Steel Large (FD-1031,FD/E6/MAP/18) S & F following components of Almirah steel large including dismantling unservicable one all as specified and as directed (a) Lock 6 lever with duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with 6 lever lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock- Rina)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/ Silver Grey shade (whichever required for existing shade) of approved quality inside including dents/bends complete all as specified and as directed.

(h) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/ Silver Grey shade (whichever required for existing shade) of approved quality outside including dents/bends complete all as specified and as directed.

Locker steel (FD-1029) S & F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated

(b) Hasp & stapple chromium plated

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed.

(e) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/ Silver Grey shade (whichever required for existing shade) of approved quality inside including dents/bends complete all as specified and as directed.

(f) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/ Silver Grey shade (whichever required for existing shade) of approved quality outside including dents/bends complete all as specified and as directed.

Table dinning ORs steel (FD-165 (R) S & F following components of Table dinning ORs steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener of MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Table top made of 18mm thick commercial plywood covered with 0.80 mm thick Aluminium Sheet all around .

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

(d) PVC shoe

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office officer/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener of MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer.

(c) Lock of 6 levers with duplicate keys

(d) Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces.

(e)Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;- (i)Table office officer

(f)Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of following type (ii)Table office clerk

(g) PVC shoe

(h) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed (i) Table Office Officer Steel

(j) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed (ii) Table Office Clerk Steel

Rack steel 6 Tier FD-129(M)/1038 S & F following components of Rack steel 6 tier including dismantling unservicable one all as specified and as directed. (a) MS angle iron of size 30mm width x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(b) Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(c) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality.

Charpoy GI pipe (FD-220) S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.

(b) 3 way 32 mm dia GI elbow ISI mark

(c) Check nuts of 32 mm dia

(d) Conversion of 32 mm dia long rail obtained from item No 15.00 (a) above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow.

(e) Conversion of 32 mm dia short rail obtained from item No 15.03 (d) above into two numbers leg including fixing to 3 way 32 mm dia elbow at one end threaded .

(f) MS flat of length equal to the length of short rail with width and thickness 40x4mm fixed with two Nos. nut & bolts on the long rail to provide complete support .

(g) S & F 12 mm BWR phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood.

Chair steel tubular with/ without arms (FD-75 M) S & F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed. (a) Seat frame

(b) Back frame

(c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

(d) S & F MS Flat rail as per existing size of the chair ,thick welded at four corner to provide complete support to the seat and back and screwed with the seat or back at two places.

(e) PVC shoe

(f) Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms 2 Nos of PVC caps on the top of the frame.

Chair Varandah (FD-256,359) (a) M&L for derusting denting of frame to chair verandah applying minor welding wherever required to refix the structure and apply synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

(b) PVC shoe

(c) Taking out and removing old U/S worn out plastic cane from chair verandah and re-canning the same with 4mm new plastic cane half round complete all as specified and directed by Engr-in-Charge.

Teapoy Varandah (FD-255/FD-35(M),FD/E6/MAP/17) S & F following components of Tepoy Varandah including dismantling unservicable one all as specified and as directed. (a) Top made out of 18mm Prelaminated Particle board one side teak and outer side white, fixing white shade on upper side including 4mm teak wood beading all around the top.

(b) PVC shoe

(c) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of white synthetic enamel paint

Table Steel 1520x860x760 (FD-1010) S & F following components of Table Steel 1520x860x760mm including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 32 mm square MS tube duly welded wherever required including one coat of OG Synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

(b) PVC shoe

(c) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Table Steel 900x900x760 (FD-1009) S & F following components of Table Steel 900x900x760 including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of OG Synthatic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

(c) PVC shoe

(d) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Table Steel 900x600x760 With Drawer (FD-167(M)/1008) S & F following components of Table Steel 900x600x760mm including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of OG Synthatic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

c) Drawer with Locks 6 lever with keys in duplicate and making the drawer functional complete all as specified and as directed and as shown on drg.(Make : RINA)

(d) PVC shoe

(e) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Table Steel 900x600x760 Without Drawer (FD-167(M)/1007) S & F following components of Table Steel 900x600x760 without drawer including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of OG Synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

(c) PVC shoe

(d) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Foam With/Without Back (FD-77 (M)) S & F following components of Foam without Back without drawer including dismantling unservicable one all as specified and as directed. (a) Top Plank of Shisham Wood to be provided of the existing size with thickness 25mm applying raw/burnt seina uniformly and polishing with french polish one or more coat to obtain a glossy finish complete

(b) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint including minor repair works.

Table Bed Side Steel (FD-157(M)) S & F following components of Table Bed Side Steel 600x380x760mm including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade or both side Teak shade and 4mm thick shisham wood beading all round the top.

(b) PVC shoe

(c) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint .

JAISWAL ENTERPRISES