SPL REPAIR TO CERTAIN BLDS AND PROVN OF TOILET DRAIN AND MT SHED AT URI UNDER GE 969 EWS

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified and as directed.

M & L for Plain Cement concrete 1:3:6 type C2 (40mm graded aggreagate) in foundations, filling and mass concrete, complete all as specified and as directed.

S & F Steel work in tubular/square tube trusses/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed.

S & F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed.

S & F 12mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and as directed.

M&L Preparation of new or previously untreated Surfaces of any description, over 10cm in width or girth,not otherwise described, priming with red oxide, zinc chrome and aplying two coats of synthetic enamel paint, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S & F Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed, complete all as specified and as directed.

Excavation in trenches n exc. 1.5m wide and n exc. 1.5m deep and getting out in Hard/dense soil, complete all as specified and as directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and as directed.

Extra over granite or trap stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm, dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, complete all as specified and as directed.

M&L for flush pointing to random rubble masonry uncoursed or brought upto courses using CM (1:4), complete all as specified and as directed.

Providing, cement concrete Type B-0 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc, complete all as specified and as directed.

M&L for Cement concrete 1:2;4 Type B1 20 mm in surface channels and drains, complete all as specified and as directed.

M&L for providing pre-cast RCC (1:2:4) type B : 1 using 20 mm graded stone aggregate as in cover slab for manholes ,chajja water trough shelves and similar articals with plain faces (with plain or interlocking joints as directed) setting in cement CM (1:6), complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Material and labour, non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick screed bed in CM (1:4), complete all as specified and as directed

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM (1:4), complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cementfor stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100mm long Anodised Aluminium tower bolt, complete all as specified and as directed.

S&F 100mm long extruded aluminium alloy handle, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty, complete all as specified and as directed.

S & F of 4mm Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed.

Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed.

S & F PVC(SWR) reducers 75/110mm bore, complete all as specified and as directed.

S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S & F PVC(SWR) 110mm Junction single (single T) equal or unequal.

S & F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.

S & F in repair Vitreous Cliina wash basin with pedastal pattern, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms), complete all as specified and as directed.

S & F of 32 mm Waste fittings, brass, chromium plated for glazed ware sinks,basins,etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S&F in repair 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed, complete all as specified and as directed.

S & F in repair for Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.

S& F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and as directed.

S&F in repair Vitreous china squatting pane, Orissa pattern size 580 x 440mm plate with integral foot rest ( excluding flushing cistern and flush pipe) including 'S' or 'P' trap and cement concrete bedding complete.

S&F in repairs 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed .

S&F for Chromium Plated bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15/20 mm dia bore, fixed as in repair, complete all as specified and as directed.

Supply and fix, angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and as directed.

Supply & fix, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, complete all as specified and as directed.

Supply and fix, grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and as directed.

Supply and fix, towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and as directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screw, complete all as specified and as directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Dismantling water tanks exc 500 and n exc 1000 ltr and removing to store, complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity all as specified in SSR Part I, complete all as specified and as directed.

Taking up or down steel tubing and connections, size 15 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed.

Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed.

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed.

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars, complete all as specified and as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6), complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work on concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc, complete all as specified and as directed.

M&L Rendering 15 mm thick on stone walling/brick wall surfaces finished even and smooth with using extra cement in cement mortar (1:4), complete all as specified and as directed.

M & L for 3mm thick wall care putty on wall, complete all as specified and as directed.

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level, complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete type B-2 1:2:4( using 40 mm graded aggregate) as in path/pavings/ floor/plinth protection etc laid in bays incl finishing the concrete surface even and smooth without using extra cement, complete all as specified and as directed.

Demolition of RCC of any description and in position, complete all as specified and as directed.

M & L for Providing precast ce- ment concrete type C1 1:3:6(20mm graded agg) as CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,angers, shelves and similar articles with plain faces, complete all as specified and as directed.

M&L for preparing old plastered or nuplasterd surfaces of walls and applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed. .

Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of OBD ,whiteor tinted ,over a coat of chalk whitening, complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm in deep and getting out in any type of soil, complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavating over areas, exc 1.5 m deep n exc 3 m and getting out in soft/loose soil, complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and as directed.

Removing excavated soil exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited,spread,levelled in layers n.exc.15cm thickness,watered and rammed to a true surface, complete all as specified and as directed.

M & L for Non skid/matt finish ceramic tiles 7 to 8 mm thick of size 400x 400 or more, in floors etc.set and jointed in neat slurry and pointed in white or coloured cemment to match for joint free over Screed bed or bedding layer of mortar 15mm of thick CM (1:4) for laying floor finishes, complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface(skirting) 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over backing of 10 mm tk CM1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate, complete all as specified and as directed.

M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM (1:6) finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1mm putty, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

Use and waste of form work to sides of foundation/footings, plinth beams and similar work for rough finished surfaces, complete all as specified and as directed.

Use and waste of form work to sides of columns and pillars for for fair finished surfaces, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 design mix controlled concrete (Using 20mm graded granite stone aggregate) in footings, plinth beams and the like, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 design mix controlled concrete (Using 20mm graded granite stone aggregate) in columns and pillars, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 design mix controlled concrete (Using 20mm graded granite stone aggregate) in lintel beams, roof beams lintle beams and the like, complete all as specified and as directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L 8mm dia TMT bar cut to length bend to shape required for stirrups incl cranking, hooking and binding with steel wire, complete all as specified and as directed.

Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc cleats etc of GE 410 (Gde-E-250 quality-A), complete all as specified and as directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of GE 410 (Gde-E-250 quality-A), complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F MS Cold rolled Butt hinges medium weight 100 mm long, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete all as specified and as directed.

S & F Aluminium handles, cast type,anodised of size 150 mm, complete all as specified and as directed.

S & F of 150mm Aluminium anodised,barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

Supply and fixing steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be including.

M & L in repair vitreous china wash down water closet pan (one piece type ivory with pvc sheet cover and flushing cistern.flushing pipe ),including making good the floor wit adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish /waste materials to a distance n.exc 50 m, complete all as specified and as directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S & F in repair Vitreous Cliina wash basin with pedastal pattern, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

S&F waste fittings, brass, chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S & F Tubular towel rail, 20mm dia, D type, 60cm long between flanges , complete all as specified and as directed.

S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S & F for 1000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted,including float valve tank nipple and fixed in position, complete all as specified and as directed.

S & F 25mm internal dia PP-R Ball valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S & F for 25mm bore dia PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S & F Grating square 150 mm size of PTMT (Minimum weight 100gms), complete all as specified and as directed.

S & F for PVC flexible connections 15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.

S & F for 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F 20mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S & F 15mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

M & L for 75mm thick Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) in Plinth Protection and finished even and smooth without using extra cement, complete all as specified and as directed.

S & F for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with axis door, complete all as specified and as directed.

S & F for PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius with axis door, complete all as specified and as directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

PVC (SWR) gully trap 150 mm, setting and jointing with solvent cement including grating, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and as directed.

S & F PVC (SWR) 110mm Junction single (single T) equal or unequal, complete all as specified and as directed.

Brick work sub class 'B'' bricks (old size) strainght or curved on plan exc 6 m mean radius built in cm (1:4) as in manholes etc , complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface chanels and drains of manholes etc, complete all as specified and as directed.

150 mm bore (internal dia) Reinforced Concrete pipes, class NP-3 laid in trenches and jointed on concrete bed to required slope jointed and plasted, complete all as specified and as directed. (concrete bed cell be measure and paid separately)

PCC 1:3:6 type D-2 using 40 mm crushed graded stone agg as in bed to drain pipes,150 mm bore including packing under hunchng against the sides of pipe after they are laid and tested, complete all as specified and as directed.

PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in bed plates bends coping benching etc including slighting mouled or chamferred edges, complete all as specified and as directed.

15 mm thick cement plaster in CM 1:3 on brick or concrete surfaces mixed with water proofing compound as per manutrs instructions surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only water proofing compound , complete all as specified and as directed.

Removing surplus & soil to a distance n exn 50 mtr & depositing where directed by engineer - in charge at a level n exc 1.5 mtr above the starting point, complete all as specified and as directed.

Construction of On site LLDPE septic tank media designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and as directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 mtr dia X 3 mtr effective depth, complete all as specified and as directed.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc , complete all as specified and as directed.

S & F for wooden wall panelling & ceilling with tongue and groove 8 to 10 mm thick fixed to timber frame work complete all as specified and directed. Note. Timber frame work including 75 X 50 mm section c/c 600X600 mm

M&L 4mm thick Pine wood veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling, complete all as specified and as directed.

M&L 4mm thick Pine wood veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on wall, complete all as specified and as directed.

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm , complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section not exc 3 Sqcm, complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed.

S & F PVC (SWR) pipe 75 mm bore single in any type with rubber ring joint laid in wall/trenches /floor, complete all as specified and as directed.

S & F PVC (SWR) bend any radious 75mm bore , complete all as specified and as directed.

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms)

S & F of 32 mm Waste fittings, brass, chromium plated for glazed ware sinks,basins,etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

M & L in repair vitreous china wash down water closet pan (one piece type ivory with pvc sheet cover and flushing cistern.flushing pipe ,connection pipe And other necesary ),including making good the floor wit adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish /waste materials to a distance n.exc 50 m, complete all as specified and as directed.

Taking up or down steel tubing and connections, size 15 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed.

Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed.

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed.

Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed.

Supply and fix, grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and as directed.

S&F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 0.63mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe, complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars, complete all as specified and as directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6. Complete all as specified and directed by Engineer-In-Charge.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4), complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc, complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work on concrete surfaces in CM 1:4 finished even and smooth without using extra cement , complete all as specified and as directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and as directed.

M&L Rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement morta 1:4 complete all as specified and directed.

Demolition of RCC of any description and in position, complete all as specified and as directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, chajja, manhole covers etc. with necessary form work, complete all as specified and as directed.

Preparation of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and as directed.

Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed.

M&L for preparing old plastered or nuplasterd surfaces of walls and applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed. .

Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed.

Fixing only for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed.

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched, complete all as specified and as directed.

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level, complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete type B-2 1:2:4( using 40 mm graded aggregate) as in path/pavings/ floor/plinth protection etc laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite, complete all as specified and as directed.

Dismantling water tanks exc 500 and n exc 1000 ltr and removing to store, complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity all as specified in SSR Part I, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is.

(a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way.

(b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board.

(c) One 3 pin 3 Amp switch socket outlet on same board with accessories.

(d) One bell/buzzer point controlled by one swtich

M&L Point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is.

M&L Point wiring complete with FRLS 1100 Volts grade, 4 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 4 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is,complete all as specified and as directed.

S&F switch piano Flush type, single pole, one way 6 amp 240, complete all as specified and as directed.

S&F Socket oulet 2 in 1, 3 pin,5 Amps, flush type, complete with gang box, complete all as specified and as directed.

S&F Socket oulet 2 in 1, 3 pin,5 and 15 Amps, flush type, complete with gang box, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universal, complete all as specified and directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal, complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm with three terminals, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F in repair Lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed.

Supplying and fix PVC flat twin core cable PVC insulated aluminium conductor size 16 sqmm 2 core, complete all as specified and as directed.

S& F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing in repair Non-metalic Ventilating Exhaust fan 250 mm sweep 230 volts, 50Hz,1200 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan, complete all as specified and as directed.

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable.

S & F Bulkhead luminaire comprising of high brightness LEDs 9/10W LED, IP-65/66, complete all as specified and as directed.

Supply and fixing exhaust fan, Steel body fresh air fan with Steel blades, ISI marked, 300 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan, complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

S & F MCB Single pole 6-32A Amps 240 Volts B Curve, complete all as specified and as directed.

S & F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed

S&F in repairs Distribution Board, SPN 6/8 Way, Single door complete all as specified and as directed

S & F modular type switch 6 Amps, one way one module complete all as specified.

S & F modular type switch 16 Amps, one way one module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module, complete all as specified and as directed.

S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module, complete all as specified and as directed.

S&F electric bell, ding dong AC 230Volts, single pole, complete all as specified and as directed.

S & F Modular Bell push 6 Amps, modular type, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc, complete all as specified and as directed.

Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc, complete all as specified and as directed.

Supply and fix modular fan step regulator,120 Watt - 2 module, complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC), complete all as specified and as directed.

Supply and fixing PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan, complete all as specified and as directed.

Supply and fixing MCB, DB,SPN, double door, IP-43, 8 way with 200 A rated bus bar having earth terminal, Neutral bus terminal for 8 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles, complete all as specified and as directed.

Supply and fixing MCB, DB,SPN, double door, IP-43, 12 way with 200 A rated bus bar having earth terminal, Neutral bus terminal for 12 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles, complete all as specified and as directed.

M&L for submain wring using proper colour coding with 3 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100 volt, Multistranded, copper conducter cable of size 6 Sqmm drawn and including PVC conduit medium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as speacified and directed. Note :- (i) The minium size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shall ensure for proper size of PVC conduit be used at site. (ii) Seperate conduit shall be used for each submain wiring circuit irrespective of any number of wire. (iii) 3 runs of conductor and one run of conduit shall be measured as one run.

S & F Single pole and neutral enclosure with a two pin and earthplug and socket complete with one single pole MCB, complete all as specified and as directed.

Supply and fix SMD LED panel recess/surface 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed.

M&L Telephone jack with pressed steel sunken box with 3 mm thick PVC top cover, complete all as specified and as directed.

Material and labour for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sq. mm 2 core .

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs 23,193.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Please Enable Macros to View BoQ information