CA NO GE(N)AMB-52/2023-24 REPAIR TO JOINERY, PLUMBING, SANITARY, ROOF, PLASTERING AND OTHER CONNECTED BLDG REPAIR WORKS IN AREA-I AND OTHER AREAS IN OTM-I ACCN OF AGE B/R-I (NORTH) AMBALA CANTT

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer–in–Charge.

Material and labour rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and fair without using extra cement complete all as specified and as directed by the Engineer–in–Charge.

M&L rendering 05 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed by the Engineer–in–Charge.

M&L rough cast plaster 15 mm thick in cement motar 1 :4 complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper with painting roller over a coat of alkali resistant primer complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of newly plastered/ unplastered surfaces of brick/concrete ceiling and applying three coats of white lime wash complete all as specified and as directed by the Engineer–in–Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engr–in–charge.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

M&L brick work with sub class 'B' old size bricks using old servicable bricks including cleaning of old bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

M&L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre per 10 Sqm complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of old decorated brick/concrete, plastered /unplastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the walls, pillars, cornices etc.complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of old decorated brick/concrete, plastered /un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper with painting roller on walls, pillars, cornices etc.complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of old decorated brick/concrete, plastered /un plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of old decorated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer–in–Charge.

M&L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of cement base paint complete all as specified and as directed by the Engineer–in–Charge.

M&L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of oil bound distemper with painting roller over a coat of alkali resistant primer complete all as specified and as directed by the Engineer–in–Charge.

M&L complete removal of existing treatment on ceiling (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of white lime wash complete all as specified and as directed by the Engineer–in–Charge.

M&L preparation of new/old plastered surfaces of wall and applying 1 to 2mm thick wall care putty white cement based in two or more coats to achive smooth surface complete all as specified and as directed by the Engineer–in–Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding including cement plaster (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer–in–Charge.

M&L non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by the Engineer–in–Charge.

Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 600 x 7 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge.

Material and labour vitrified ceramic light shade tiles premium/1st quality 8 to 9mm thick (square/rectangular) area of each tile exceeding 0.42 sqm and not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed by the Engineer–in–Charge.

Material and labour vitrified ceramic light shade tiles premium/1st quality 10mm thick of same description as of floor tiles as in serial item No 24 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge.

Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer–in–Charge.

M&L 100 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement complete all as specified and as directed by the Engineer–in–Charge.

M&L 25 mm thick PCC 1:2:4, type B0 as in sub base floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed by the Engr–in–charge.

M&L providing 75 mm thick cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and as directed by the Engineer–in–Charge.

M &L 10mm thick out door coloured vitrified paver tiles heavy duty of size 300 x 300mm in floors etc set and jointed in neat cment slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in C.M 1 :4 ,complete all as specified and as directed by the Engineer-in-Charge.

M&L vibratory rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006, ISI marked of 60 mm thickness, grade M-35 with grey cement and no pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and as directed by the Engineer-in-Charge.

M&L plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork for rough finished surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.

Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.

Taking down shutters of any description area exc 1.00 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete all as specified and as directed by the Engineer–in–Charge. Note : (a). Glazing shall be measured and paid separately; (b). Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured. (c). The rates quoted shall be inclusive of neoprene beading, 8 mm dia MS tie rod screwed at both ends with nuts, to be fixed along top & bottom rails of all door shutters, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight. (d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed.

S & F anodised aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the window frame with C.P brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelam sheet and fixed in opening complete all as specified and as directed by the Engineer–in–Charge.

S&F factory made solid panel (wood free EPS filled) PVC moulded door shutter with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick plain moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer–in–Charge.

S&F stainless steel butt hinges 100mm long medium weight complete all as specified and as directed by the Engineer–in–Charge.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer–in–Charge.

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer–in–Charge.

S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and as directed by the Engineer–in–Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.

M&L sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer–in–Charge.

M&L sheet glass 4.8mm thick ordinary quality and glazing with aluminium snap beading, rubber gasket in square not exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer–in–Charge. Note : weight of aluminium snap beading will be measured & paid under serial item No. 36

M&L 12 mm thick prelaminated particle board interier grade (grade–1) confirming IS 14587 prelaminated both side with decorative choice lamination and fixed to aluminium door shutter with glazing clips, rubber complete all as specified and as directed by the Engineer–in–Charge. Note : weight of aluminium snap beading will be measured & paid under serial item No. 36

S&F galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised mild steel wire staple complete all as specified and as directed by the Engineer–in–Charge.

S&F as in repair stainless steel curtain rod 25mm dia having wall thickness 1.00mm with and including stainless steel decorative brackets, two finials/end brackets (as required) for each rod length at both end etc fixed with stainless steel screws (35*8) & PVC rawl plug complete all as specified and as directed by the Engineer–in–Charge.

S&F aluminium (Diecast) body hydraulically door closer regulated, designation No. 3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and as directed by the Engr–in–charge.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed by the Engineer–in–Charge

S&F for 100 mm size long mortice lock vertical type, 4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified and as directed by the Engineer–in–Charge

S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and as directed by the Engineer–in–Charge

Dismantling of plain or corrugated AC sheet of any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed by the Engineer–in–Charge.

S&F Pre–painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, having zinc coating 150 gm per sqm (Az–150) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer–in–Charge.

S&F Pre–painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having Zinc coating 150 gm per sqm (Az–150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer–in–Charge.

Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills, sunshades, shelves, lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth complete all as specified and as directed by the Engineer–in–Charge.

M&L galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and as directed by the Engineer–in–Charge.

M&L galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F CP brass wall mixture 3–in–1 system with provision for overhead shower and telephonic shower for mixing hot and cold water suitable for 15mm bore pipe complete with 115 mm long bend pipe, connecting legs & wall flange and wall bracket for hand shower as in repair complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing as in repair, brass chromium plated WHB mixer sawn neck for mixing hot & cold water for 15mm bore pipes including all connecting fittings, screwed down for iron pipe and fixed complete all as specified and as directed by the Engineer–in–Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F vitreous china wash hand basin white, flat back of size 550mm x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F vitreous china table top wash hand basin white, of size 565mm x 420mm x 140mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair complete all as specified and as directed by the Engineer-in-Charge.

S&F as in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe complete all as specified and as direced by the Engineer–in–charge.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device and health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F single piece water closet wtih PP soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, S or P Trap complete fixed as in repair complete all as specified and as directed by the Engineer-in-Charge. Make : Jaquar Cat Part No SLS -WHT-6855S /CERA Cat part No.S10131095 /Hindware Cat Part No.92099 (S-30)

S&F 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC as in repair complete all as specified and as directed by the Engineer–in–Charge.

Supply & fixing as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide and 60cm long with chromium plated guard and railing, complete all as specified and as directed by the Engineer-in-Charge.

S&F as in repair grating doom 100mm dia of stainless steel with or without waste hole complete all as specified and as directed by the Engineer–in–Charge.

S&F sinks with double bowl and double drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, waste pipe, chromium plated waste coupling, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 2000mm x 510mm, bowl size 460mm x 400mm x 215mm as in repair complete all as specified and as directed by the Engineer–in–Charge.

S&F as in repair stainless steel peg set having five hook on each length 300mm fixed with brass screws complete all as specified and as directed by the Engineer–in–Charge

S&F 20 mm bore Gun–metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing as in repair water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore, complete all as specified and as directed by the Engineer–in–Charge.

Supply and fixing as in repair water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore, complete all as specified and as directed by the Engineer–in–Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by the Engr–in–Charge.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall complete all as specified and as directed by the Engineer–in–Charge.

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer–in–Charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floor or fixed to wall complete all as specified and as directed by the Engineer–in–Charge.

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer–in–Charge.

M&L 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement including fixed in cement concrete as in repair complete all as specified and as directed by the Engineer-in-Charge

Taking down rolling shutter of any size and any type and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge.

S & F steel rolling shutters 1.25 mm thickness of laths, with required ball bearing for rolling shutter including shaft, top cover, guide channel, anchoring rod, hasp and staple and one shop coat of primer, erected/fixed as required in position complete push pull or manual type complete all as specified and as directed by the Engr-in-charge.

S & F Steel rolling shutters 1.25mm thickness of laths, with required ball bearing for rolling shutters, including shaft, top cover, guide channel, anchoring rod, hasp and staple, gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers including one shop coat of primer, erected/fixed in position as required complete all as specified and as directed by the Engr-in-charge.

Taking down rolling shutter push pull or manual or gear operated type including taking down accessories like shaft, top cover, guide channel and straightening/ rectify warped/buckled parts, replacing unserviceable components/parts with new with and including cleaning/overhauling, greasing/oiling, make functional rolling shutter in all respect and refixing the same in same opening to walls/RCC members all as directed by the Engineer-in-Charge.

S&F as in repair ball bearing for rolling shutters complete all as specified and directed by Engr-in-Charge

S&F as in repair safety lever locks, mild steel with four levers for rolling shutter complete all as specified and directed by Engr-in-Charge

S&F 12 mm thick costomized and moulded toughened glass as in partition, door, window fixed with patch fittings of stainless steel grade 304 or any suitable fittings of stainless steel grade 304 as required (fixing of glass should be top to bottom and any cutting required shall be done with diamond blade) including drilling holes for patch fittings and spider fittings as required and locking arrangement complete all as specified and directed by Engr-in -charge

S & F hinge of stainless steel grade 304 suitable for toughened glass door complete all as specified and directed by Engr-in -charge

S & F 600 mm handle of stainless steel grade 304 fancy type suitable for toughened glass door, complete, all as specified and directed by Engr-in -charge

Supply and fixing as in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including brass chromium plated spreader, PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe, complete, all as specified and as directed by the Engineer-in-Charge.

Dismantling boarding any description, fixed in any position with nails, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 18mm thick PVC celuka plain sheet as in sides & shelves for CB/ Kitchen cabinets including joining with brackets & black enamelled MS screws etc. The panel shall be fabricated using adhesive and screws where ever required. All exposed edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification, complete, all as specified and as directed by the Engr-in-charge.

S & F continuous (piano) hinges , width of flaps 30mm (when open) mild steel bright finish or electro galvanished complete all as specified and as directed by the Engr-in-charge.

S&F 100 mm long fancy type stainless steel handle complete all as specified and as directed by the Engineer-in-Charge.

S&F magnet catcher fixed in cabinet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 18mm thick PVC celuka plain sheet as in small strips n.exc 10cm in width for supporting shelves including fixing the same to walls using SS screws and PVC rawl plugs including dismantlings existing battens of any material/type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of 24mm thick PVC celuka sheet having one side decorative laminated sheet as in shutters for CB/Kitchen cabinets includind fixing to frame as required All the exposed edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification complete all as specified and as directed by the Engineer-in-Charge.

S&F 450mm long stainlesss steel telescopic channel with ball bearing runners (KTS–20) full extension, load capacity minimum 50Kgs complete all as specified and directed by Engr–in–Charge. Make : HETTICH/ KAFF/ GLEN/ HARRISON/ GODREJ.

S&F Fancy type ‘D’ shape cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long complete all as specified and directed by Engr–in–Charge.

S&F for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr–in–Charge. Make : HETTICH/ KAFF/ GLEN/ HARRISON/ GODREJ.

Note:- Amount of credit of Rs. 1,14,725.00 for retrieved materials is mentioned in Schedule of Credit Page No. 39 & 40 of tender documents in pdf form which will be deducted offline while acceptance of tender.

JS CONSTRUCTION COMPANY

M/s B.S.Jain