Supply of Materials for the construction of Anganwadi no. 13 in ward 12 under MGNREGS

Amount

SUPPLY OF MATERIALS FOR THE CONSTRUCTION OF ANGANWADI NO. 13 IN WARD 12 UNDER MGNREGS

Stone for masonry work

Through and bond stone size 24x24x39cm

Portland cement

Coarse sand(zone III)

Structural steel such as tees, angles, channels and R.S.Joists

Red oxide zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75 m)

Beam clamp 300-380 mm (450-1070 mm)

Stone aggregate (single size) : 20 mm nominal size

Stone aggregate (single size ):10 mm nominal size

Hire charges of Concrete mixer 0.25 to 0.40 cum with hopper

Vibrator (Needle type 40 mm)

Solid blocks of size 30x20x15 cm

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Adjustable span ESO + SI (2.35-3.40)

Twisted steel / deformed bar

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Factory made door frame size 50x47 mm withwall thickness 5 mm made of single piece extruded profile

35 mm thick factory made solid panel PVC door shutter of single piece extruded profilenon decorative finished (Matt finished)

Powder coated M S butt hinges 100 mm x 58 mm x 1.9 mm

Fine sand (Zone IV)

Mild steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Polyethylene water storage tank with cover and suitable locking arrangement

Iron hooks & eyes 100mm

Vitreous China flat back wash basin 550x400 mm

15 mm C P brass tap

C P brass waste 32 mm

C.I bracket for wash basin and sinks

200 mm Aluminium aldrop

Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Chromium plated Brass screws 30 mm

Anodised Aluminium handles 125 mm with plate 175x32 mm

Chromium plated brass screws 25 mm

PVC pipe 110 mm outer dia 6 kgf/cm2

PVC pipe 25 mm outer dia. 10 kgf/ cm2

PVC pipe 20 mm outer dia 12 kgf/cm2

PVC pipe 50 mm outer dia 6 kgf/cm2

Black plastic seat (solid) with lid C P brass hinges and rubber buffers

Vitreous China pedestal type wate closet

Flushing cistern PVC 10 Lts capacity (low level)(white) (with fittings, accessories and flush pipe)

Semi rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Stainless steel kitchen sink - without drain board 470 x 420 mm bowl depth 178 mm

Stone aggregate (single size) : 40 mm nominal size

Vitrified floor tile 60x60 cm

Ceramic Glazed tiles Ist quality minimum thickness 5 mm in all colours shades and design except burgundy, bottle green black

Pink primer (for wood)

Deharadun White lime

Plastic emulsion paint

Synthetic enamel paint in black or chocolates shade

Mild steel tubes hot finished welded type

Welding by electric plant

PVC pipe 63 mm outer dia 4 kgf/cm2

Brass stop cock 15 mm dia

C.P brass angle valve 15 mm

PTMT - soap dish/holder 138x102x75 mm

G.I. pipes 40 mm dia

Mild steel plates

Epoxy paint

Asishakasim