Bid Documents For(1) Electrification work of Highmask near Suvarn City to Vinayak City Road at Kadi (2) Street Light From Bhagyoday Hospital Dharati Circle to Juni Mahesvari Society at Kadi Under Proffessional Tax Year 2025-26 at Kadi

Name of Work:- Bid Documents For(1) Electrification work of Highmask near Suvarn City to

Vinayak City Road at Kadi (2) Street Light From Bhagyoday Hospital Dharati Circle to Juni

Mahesvari Society at Kadi.

Name of Work:- Estimate for Electrification work of Highmask near Suvarn City to Vinayak City

Qty. Description Final Rate Unit Amount

Supplying & erecting Steel tubular pole (Swaged)

confirming to IS - 2713 (Part-II) 1980. Manufacturing

process of steel tubular pole should be as per IS

specification. Basic steel tube should be ISI Marked.

Pole should be painted by one coat of Zinc comet Primer

and two coat of Aluminium /approved paint to be

erected on / in existing Foundation. The length of poles

(F) 12.00 mtr. Long Swaged Steel tubular pole as per IS

code 410-SP-58 with 450 X 450 X 6 mm base plate with

necessary G.I. J Bolts (Approximate weight 186 Kg)

For burial erection

(ii) ADD Extra for M.S. Base plate 400 X 400 X 16 mm

1.00 for pole, mounting on surface of foundation on GI 1704.88 Ea.

foundation bolt. with required stiffeners.

(iii) Add Extra for PU base primer and PU Paint on pole.

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

30.00 cable or locating the fault all over the run and back 74.74 Rmt

filling the same and making the surface as normal

ground. ITEM NO.:-3

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories

30.00 of same material at required depth for laying of 62.62 Rmt

cable. below ground / road surface for enclosing

cable and back filling the same to make ground as per

original. (A)50 mm dia

Supplying & erecting Sintex or approved make SMC

press moulded composite FRP. loop-in, loopout approx.

2mm thick box complete with Bakelite connector strip

4way & hinged doors having locking arrangements

with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth

bolt of following size of box.(a) 300mm x 200mm x

100mm [deep] or suitable

Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side,

with internal and outside looking arrangement with look

and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar

fabricated from 16 Gauge MS Sheet with angle iron legs

45 cm long made from 35 X 35 X 5 mm thick MS angle.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply

by making up to following size of holes at both ends

(B) Up to 150 mm bore dia

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(b) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

2.00 insulated armoured cable complete with out going 38.38 Each

tails, insulating tape etc for following size of

cables. (A) 2 to 4 core 10 Sq. mm

Solderless crimping type Aluminium lugs

conforming to IS suitable for cable of following size

8.00 evenly crimped with high pressure tool & connected to 13.13 Each

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (B) 10 Sq.mm

Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and

1.00 buch buried in specially prepared earth pit complete 823.15 Nos

with necessary 8 SWG earth wire,using salt and

charcoal / coke as required for pipe type earthing.

Providing M-150/ 1:2:4 cement concrete foundation &

70 % PCC from bottom including excavation for the

pole of size 90 x 90 x 180 cms. Deep in below ground

1.00 level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 2209.88 Ea.

cms) high upper level ground cement concrete with

necessary curing and finishing in approved manner

[above 11 mtr & above poles]

Providing cement concrete.for foundation or for

concrete filling in 1:2:4 ratio with 20 to 25 mm stone

metal duly plastered with necessary curing for pole

muffing or any other purpose.

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral

6.00 and ,Light must have 440VAC line supply with over- 5175.24 Nos.

voltage protection.(iii) Above 60 to 90 watts cat(iii)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

20.00 KV. to be laid on wall with necessary clamps or in 171.70 Rmt

existing trench / pipe at road crossing or floor of

following size of cables.

(E) 3 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper conductor

14.00 for 1.1 KV. to be laid on wall with necessary clamps or 455.51 Rmt

in existing trench / pipe at road crossing or floor of

following size of cables.

(A-1) 4 core 4 Sq. mm Rs.

Total of Schedule B-1 Total Rs.

Name of Work:- Estimate for Street Light From Bhagyoday Hospital Dharati Circle to Juni

Mahesvari Society at Kadi.

Qty. Description Final Rate Unit Amount

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cms or required depth for laying any size of

230.00 cable or locating the fault all over the run and back 74.74 Rmt

filling the same and making the surface as normal

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories

230.00 of same material at required depth for laying of 62.62 Rmt

cable. below ground / road surface for enclosing

cable and back filling the same to make ground as per

original. (A)50 mm dia

Supplying & erecting Steel tubular pole (Swaged)

confirming to IS - 2713 (Part-II) 1980. Manufacturing

process of steel tubular pole should be as per IS

specification. Basic steel tube should be ISI Marked.

Pole should be painted by one coat of Zinc comet Primer

and two coat of Aluminium /approved paint to be

erected on / in existing Foundation. The length of poles

(B) 8.5 mtr. Long Swaged Steel tubular pole

(i) Pole as per IS code 410-SP-16 with 300 X 300 X

mm base plate with necessary G.I. J Bolts (Approximate

weight 75 Kg) For burial erection

(ii) Add Extra for M.S. Base plate 300 X 300 X 16 mm

10.00 for pole, mounting on surface of foundation on GI 982.73 Each

foundation bolt. with required stiffeners.

(iii) Add Extra for PU base primer and PU Paint on pole.

Providing Street Light pole bracket consisting of

medium class MS pipe of 4.2 cms. Out side dia

complete with suitable sleeve tubing 45 cms. long M S.

pipe (Medium Class). Suitable for 76.5 mm /80mm /

required size of pole top having sufficient fastners for

fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded

stays, reducer and with check nuts complete painted

with one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos

8.00 [a] Single Arm bracket 1.50 Mtr 683.77 Each

2.00 [C] Triple Arm Bracket 1.5 Mtr 1331.18 Each

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT

14.00 3000 K to 5700K,Uniformity ratio >0.45, Luminaire 5080.30 Each

efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(iii) Above 60 to 90 watts Cat-iii

Providing M-20 / 1:2:4 cement concrete foundation

& 70 % PCC from bottom including excavation for the

pole of size 60 x 60 x 120 cms. Deep in below ground

10.00 level with plinth of 45 cms x 45 cms (or 45 cms dia x 45 1292.80 Each

cms) high upper ground level with necessary curing and

finishing in approved manner. (for 7.5 & 8/8.5 Mtr Pole)

Supplying & erecting Sintex or approved make SMC

press moulded composite FRP. loop-in, loopout approx.

2mm thick box complete with Bakelite connector strip

4way & hinged doors having locking arrangements

with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth

bolt of following size of box.(a) 300mm x 200mm x

100mm [deep] or suitable

Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle

iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work

finishing with plaster etc. hinged double door internally

supported on both side,

with internal and outside looking arrangement with look

and keys in duplicate 35 x 35 x 5 mm M.S. Angle of

Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar

inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar

fabricated from 16 Gauge MS Sheet with angle iron legs

45 cm long made from 35 X 35 X 5 mm thick MS angle.

Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(C) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out going

tails, insulating tape etc for following size of

(C) 2 to 4 core 10 Sq. mm

Solderless crimping type Aluminium lugs

conforming to IS suitable for cable of following size

80.00 evenly crimped with high pressure tool & connected to 13.13 Each

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and

10.00 buch buried in specially prepared earth pit complete 823.15 Nos

with necessary 8 SWG earth wire,using salt and

charcoal / coke as required for pipe type earthing.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply

by making up to following size of holes at both ends

(B) Up to 150 mm bore dia

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

119.00 unarmoured copper cable 1.1 KV grade to be erected as 171.70 Mtr

directed of following size. (e) 3 core 2.5 Sq. mm

P & F. Cast iron earth plate size 30 X 30 X 0.35 cms or

suitable. burried in specially prepared 2.5 Mtr. deep

10.00 earth pit complete with necessary G.I. strip in G.I. pipe 2 685.79 Nos.

Mtr. long with coupling and G.I. plug for earthing of

switch gear, conduit run or power plug etc. [earthplate]

For using salt and charcoal / coke as required for

pipe type earthing. (S.O.R. 3-14-6-C)

Providing and erecting HOT deep Galvanized

iron strip wire 8 to 16 S.W.G. (

Miniature circuit breaker single pole 6A to 32A suitable

to operate on 240VA.C system and having breaking

capacity 10KA to be erected din existing box.

IS8828/1996 with CAT-III

Supplying & erecting power contactor for time switch

1.00 complete erected as per direction Cat III [D] 4 pole 2782.55 Each

Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. At 415 V,

having normal current rating up to 25 A to 100A. With

1.00 Fixed thermal & magnetic release suitable to work on 6790.23 Each

A.C. supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting B class Galvanized iron pipe

having smooth finished bore of the pipe on both ends

30.00 erected nuts and bolts along the pole / wall shaping the 326.23 Mtr

pipe as per site requirement. Pipe dia as following. (D)

Supplying and erecting bakelite sheet 12mm thick

1.00 HYLAM make on existing angle iron frame. (F) 12mm 2311.89 Sqmt

Total of Schedule B-2 Say Rs.

Schedule B-1 + B-2 Say Rs.

Say Rupess Four Lakhs Seventy Two Thousand Two Hundred Thirty Only

I/We am/are willing to carry out the work @............... % above/below (Percent

should be written in figures and words ) The tendered amount mentioned above

amount of my /our tender works out as under

Tendered amount Rs……………………….. Tendered amount Rs………………………..

Add ……...% above Rs…………………. Deduct ……...% Below Rs………………….

(Please strike out which ever is not applicable )

All work shall be carried out as per public works department handbook and other

specifications of division or as directed.

Rates quoted inclusive of clearance of sight (prior to commencement of work and at

2 its close) in all respect and hold good for work under all conditions , sight, moisture,

One percent labor cess will be deducted from the valued work done as per ' Bulding

3 and other construction work welfare cess act' G.R. No. GHR -

GST and Income tax TDS will be deducted at a source while making payments of

5 GST will be paid extra as per Govt. amendment.

Sign of Contractor

Kadi Nagarapalika