REPAIR ,MAINT TO LT EXTERNAL ELECTRIFICATIONS, REPAIR, MAINT OF SECURITY AND PERIMETER HIGH MAST LIGHTS, SOLAR LIGHTS, GARDEN LIGHTS AND CONNECTED ITEMS AND REPAIR, MAINT SERVICING TO DG SETS, LT PANELS AND EARTHING AT ALONG MIL STN UNDER GE 872 EWS

Amount

Dismantling of unserviceable broken LT steel pole/Strut any size including demolition of foundation as required and making good disturbed surface complete all as directed. (Note : Earth work wherever invloved shall be measured and paid separately)

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside serviceable materials for re-use with in 50m and removing unserviceable materials from site of work incluidng demolition of PCC foundation and taking out base plate etc complete all as directed by the Engr-in-Charge

Dismantling LT Stay assembly, of any size and unserviceable materials removing from the Site(s), complete all as specified and directed. (Note: (a) Unserviceable Stay assembly shall be taken off/dismantled at Ground Level and making good disturbed ground surface. (b) Earthwork for demolition of cement concrete shall be measured and paid separately under relevant Items of this Schedule.)

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches not exc. 1.5 metre wide and exc. 1.5 metre & not exc. 3 metre depth (beyond the first 1.5 metre) for foundation of poles etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.

M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including one coat of aluminium paint over a coat of red oxide zinc chrome primer and providing 03 Nos band/strap with black/yellow colour paint 300mm apart from the plinth block, numbering of pole painting embedded portion of pole with one coat of black bitumenous paint complete all as specified and directed. (Note : Excavation and Earth work shall be measured and paid separately)

M & L for Cross arms bracing supports clamps and back plates fabricated from structural steel sections including nut bolt washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and including one primer coat of red oxide zinc chrome primer, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

M & L for Stay assembly complete with all accessories as shown in electrical plate No 1 of MES Schedule Part I dia of stay rod 16mm with and including 7 / 3.15 mm galvanised stay strand complete all as specified and directed. (Note : Loop insulator, excavation & earthwork and cement concrete measured and paid separately under relevant items of this Schedule.)

M & L for loop type insulator, vitreous porcelain, white, brown or green of overall dimension 65 x 90 mm, clearance of hole 25.5 mm etc complete all as specified and directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)

All as per Serial item No. 15 above but for 16 Sqmm 4 core cable complete ditto

All as per Serial item No. 15 above but for 25 Sqmm 3.5 core cable complete ditto

All as per Serial item No. 15 above but for 35 Sqmm 3.5 core cable complete ditto

All as per Serial item No. 15 above but for 50 Sqmm 3.5 core cable complete ditto

All as per Serial item No. 15 above but for 70 Sqmm 3.5 core cable complete ditto

S & F outdoor epoxy straight through joint for LT XLPE/PVC insulated cable including all asseccories and connections for 16 Sqmm to 95 Sqmm, 3.5/4 core cable complete all as specified and directed (Excavation and earth work shall be measured and paid seperately)

M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying locally available best quality, well burnt sub class B bricks (old size), laid dry in trenches for protection of UG cables complete all as specified and directed.

S & F in repair MCCB 415 Volt 25 KA, 3 Pole, 63 Amps Capacity complete all as specified and as directed . (Make: Legrand Cat Part No. 4200 43 or equivelant of make as per List of Manufacturer's)

S & F in repairs MCCB 415 Volt, 25 KA, 4 Pole, 100 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 55 or equivelant of make as per List of Manufacturer's)

S & F in repair MCCB 415 Volt, 25 KA, 4 Pole, 160 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 57 or equivelant of make as per List of Manufacturer's)

S & F in repair MCCB 415 Volt, 25 KA, 4 Pole, 200 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4202 18 or equivelant of make as per List of Manufacturer's)

Material and Labour for preparation of old metal surfaces of Panel Boards/ Feeder pillar board/ pole box inddor/ outdoor type of any descriptions over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint (1st quality) and marking the Panel Board No etc in front side complete all as specified and directed by engineer in Charge. (Note: Adjoining areas there to properly covered befor painting. Adjoining areas, floor, walls are to cleaned free of paint spillage after painting work).

M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab of size 350x350x50mm (reinforced with 10 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

M & L Earthing complete with copper earth plate electrode 600 mm x 600mm x 3.15 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with copper earth strip of size 20x3mm by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)

S & F in repair LED 60 Watt, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, IP66 flood light, suitable for highlighting architectural facade and general purpose lighting and with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length complete all as specified and as directed. (Make: Havell's Cat No. JETAALBAFLOODLIGHT60W or equivelant of make as per list of manufacturer)

S & F in repair 25 Watt, 230 Volts AC Post Top Lantern, outdoor type with decorative post top for 360 Degree indirect light, IP 65 protection with impact and corrosion reisitant comp[lete with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specified and directed. (Make: Havell's Cat No. CORALPT25WLED757PSYMTOPC or equivelant of make as per list of manufacturer)

S & F in repair 20 Watt, 230 Volts AC Post Top Lantern, Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specified and directed. (Make: Havell's Cat No. LHFXBON1TN5Q020 or equivelant of make as per list of manufacturer)

S & F in repair 30 Watt, 230 Volts AC New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with lamp, fixing accessories and connecting up with suitable copper conductor complete all as specified and directed. (Make: Havell's Cat No. ENDURASUNDOWNSL30WLED757PASYBOPC or equivelant of make as per list of manufacturer)

S & F in repair 45 Watt, 230 Volts AC New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with lamp, fixing accessories and connecting up with suitable copper conductor complete all as specified and directed. (Make: Havell's Cat No. ENDURASUNDOWNSL45WLED765PASYBOPC or equivelant of make as per list of manufacturer)

Taking down existing unserviceable street lights from pole of any capacity, checking the same for serviceability, carrying out repairs including changing of defective parts and re-fixing the same in existing position including testing, complete all as specified and as directed. Notes:- (i) Cost of minor spares such as wiring wires, nut, bolts and washers deemed to be included in the unit rate quoted. (ii) Spares parts shall be measured and paid seperately as 'Supply only' under appropriate Items. Labour element for the same shall deemed to be included in the unite quoted rate

Supply only LED Driver 30/45 watts as per site requirement complete all as specified and as directed.

S & F in repair Street light bracket arm of length not less than 1.2 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp 40x5mm of suitable length, nuts, bolts & washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S & F in repairs shock proof, rust proof, fire reterdant, non transperant Kiosk Pole box of size 310x210x120mm made of Negineering Plastic on piece moulded for outdoor type, heavy duty, IP-66 protection, with 4 Nos insulated aluminium bus bar of 60 Amps capacity, mounted on unbreakable insulators, MCB SP 10 Amps complete aluminium lugs of suitable size upto 50 Sqmm including 2 Nos of flat iron 40x3mm clamps with suitable MS nuts, bolts & washers etc and duly powder coated on both sides complete all as specified and directed directed. (Make : HENSEL or equivalent model of make as per list of manufacturer)

S & F in repair PVC insulated and FRLS PVC Round Sheathed, multi-stranded Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 of size 1.0 Sqmm 3 core nominal cross sectional areacomplete all as specified and directed.

S & F in repair 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repair 50 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for Preparation of old painted surface above the planting depth/PCC coping of steel tubular LT pole upto 11.00 metre long including MS clamps, cable protection pipe, bracket fitted with steet light fittings etc by scraping with steel wire brush and applying one coat of aluminium paint to external surface of poles, MS cross arms, MS clamp, cable protection pipe etc to give even shade including 5 Nos strips painting of 300mm high each around the pole with two different colour (black/yellow) of synthetic enamel paint and numbering of poles complete all as specified and as directed by the Engr-in-Charge.

M & L for boring of horizontally holes by manual method under road and dia of hole not exc 100mm without damaging the exsting road, getting out and disposal of excavated soil, etc to a distance not exc. 50 meter from the site of work complete all as directed by Engineer in charge.

M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab of size 350x350x50mm (reinforced with 10 mm dia TMT bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge.

M & L for Repair/ Maint, Servicing of Diesel engine generating set of capacity 62.5 KVA of Make:- Kirloskar, 1500 RPM, Air cooled/Water cooled consisting of the following works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE : (a) Replacement of Consumable Items such as Distilled Water, Lube Oil, Grease etc are deemed to be included in the unit quoted rate. (b) All Other Spare Parts (Quantitites mentioned under supply only items here-in-after are Provisional only) and will be Measured & Paid seperately as 'Supply only' under appropriate Items. Labour element for the same shall deemed to be included in the unite quoted rate)

All as per serial item No. 48 above but for 100 KVA DG set complete ditto

Supply only Air Filter Assembly including Fliter (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Bearing for cooling fan and fan belt (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Cooling fan (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Fuel Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Fuel pipe (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Oil Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) suitable for DG Set 62.5 KVA complete all as specified and as directed.

Supply only Air Filter Assembly including Fliter (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Bearing for cooling fan and fan belt (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Cooling fan (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Fuel Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Fuel pipe (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only Oil Filter Assembly including Filter (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) suitable for DG Set 100 KVA complete all as specified and as directed.

S & F in repair Asbestos Rope (as per existing/ as approved) complete all as specified and as directed.

S & F in repair Battery Terminal of Copper/Brass (as per existing/ as approved) and connected complete all as specified and as directed.

S & F in repair Toggle Switch 3-way, Double Pole (as per existing/ as approved) and connected complete all as specified and as directed.

M & L for Cleaning of Radiator of any Capacity after Opening all Nuts, Bolts, etc. by dismounting, Re-mounting after Cleaning with Chemical and Tightening of Nuts, Bolts, etc. including Straightening of Radiator Fins with suitable Tools, complete all as specified and as directed.

M & L for Repairing & Cleaning of Diesel Tank with suitable Materials after disconnecting Fuel Line, Opening of all Nuts, Bolts, etc., Re-fixing the same after satisfactory Repairing including necessary Welding (if required), etc., complete all as specified and as directed.

Supply & Filling Coolant for Radiators as approved complete all as specified and as directed. (MAKE : KIRLOSKAR or equivalent Make as approved by GE)

Supply & Filling Engine Oil 20 W/ 40 Grade as approved, complete all as specified and as directed. (MAKE : CASTROL CRB PLUS or equivalent Make as approved by GE)

S & F in repair on load Change over switch, front operated, open execution, general purpose with side handle, current rating 125Amps, 4 pole, 415 V, 50 Hz complete all as specified and directed. (Make: L & T Cat No. CO11250OOOO or equivelant approved make as per list of manufacturer)

S & F in repair MCCB 415 Volt 16 KA, 4 Pole, 125 Amps Capacity, fixed thermal and fixed magnetic release complete all as specified and as directed . (Make: Havell's Cat No. IHLGNF0125# or equivelant of make as per List of Manufacturer's)

S & F in repair on load Change over switch, with SS enclosure, general purpose with side handle, current rating 63Amps, 4 pole, 415 V, 50 Hz complete all as specified and directed. (Make: Havell's Cat No. IHCNFE0063 or equivelant approved make as per list of manufacturer)

M & L for repair/ overhauling of electric panel board including replacement of defective spare/parts such MCCB, MCB, CT, voltmeter, Amp meter, frequency meter, indicator lamps etc including necessary welding to doors, replacement of defective wire, lugs etc and spray painting with one coat of synthetic enamel pait (1st grade quality) complete all as specified and directed. (Note : (i) Spare parts shall be measured and paid seperately as supply only. (ii) The cost of cleaning, painting and replacement of minor spare such as lugs, wire etc shall deemed to be included in the unit quoted rate).

Supply only MCCB 415 Volt, 36 KA, 4 Pole, 630 Amps Capacity, adjustable thermal and magnetic release complete all as specified and as directed. (Make: Havell's Cat Part No. IHLLSEC40630 or equivelant of make as per List of Manufacturer's)

Supply only MCCB 415 Volt, 36 KA, 4 Pole, 400 Amps Capacity, adjustable thermal and magnetic release complete all as specified and as directed. (Make: Havell's Cat Part No.IHLLSEC40400 or equivelant of make as per List of Manufacturer's)

Supply only MCCB 415 Volt, 25 KA, 4 Pole, 200 Amps Capacity, adjustable thermal and magnetic release complete all as specified and as directed. (Make: Havell's Cat Part No. IHLANDC40200 or equivelant of make as per List of Manufacturer's)

Supply only MCCB 415 Volt, 25 KA, 4 Pole, 100 Amps Capacity, adjustable thermal and magnetic release complete all as specified and as directed. (Make: Havell's Cat Part No. IHLASDC40100 or equivelant of make as per List of Manufacturer's)

Supply only CT's Cast Resin type of ratio 100/5 Amps suitable for electric panel complete all as specified and as directed. (Make: AE/L & T or equivelant of make as per List of Manufacturer's)

Supply only MCB 4 pole 63 Amps, 240 Volts, 10KA, C curve complete all as specified and as directed (Make: Havell's cat part No. DHMZCFPF063 or equivalent make as per List of Manufacturer's)

Supply only MCB 4 pole 40 Amps, 240 Volts, 10KA, C curve complete all as specified and as directed (Make: Havell's cat part No. DHMZGCFPF040 or equivalent make as per List of Manufacturer's)

Supply only Neon indicator lamp (RYB) for panle board complete all as specified and as directed

M/S A K BROTHERS (BID ID -3295244)

M/S A K ENTERPRISE (BID ID -3295709)

ABOTANI ENTERPRISE (BID ID -3295716)

M/S R D CONSTRUCTION (BID ID -3295714)

Shree Trilok Electric Corporation (BID ID -3296873)

FREEZCON (BID ID -3296446)

R.D.CONSTRUCTION (BID ID -3295770)

RIA CONSTRUCTION (BID ID -3296612)