Construction of Anganwadi building at Inootrimangalam at K.Pettai Panchayat

Amount

Name of the Work : Construction of Anganwadi building at Inootrimangalam H/O K.Pettai Panchayat

Earth work excavation for foundation in all clauses of soits and sub sols to fu depth as may be directed except in hard rock requiring testing but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification

Supplying and filling of conveyed earth with a lead of 1Km for basement filling

Cement concrete 1:4:8 mix (one cement four sand and eight aggregate)using 40mm hand broken granite tone jelly for foundation including dewatering found ecessary and laid in layers of not more than 15 cm thick and compacted,etc.. complete comply

Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground 3 maded of size 23 x 11 x 7 cm including curing finishing and cost & Conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams,elc, including strutting 3m high using mild steel sheets of size 90cm X 80cm X and BG 10 stiffened with MS angles of size 25mm X 25mm

Supplying fabricating and placing in position of abbed steel for inforcement to all RO works as per the design given inhunting cost of stent and bining wire also in all floors ale, complete

RCC 1:1/2:3 mix using 20 mm 1SS HBG metal for RCC items of work excluding items of works excluding Centering shuttering, and cost of reinforcement grill, out including curing etc complete and also including fixing fan clamps and mixtures in rcc works

Plastering with cm 1:5 mix one cement and five sand) 12 mm thick including cost and conveyance of all materials in atfloors etc as directed by dep officers etc, complete complying with standard specifications

Plastering surfaces of RCC items such as stabs,beams,sunshades with cement mortar 1:3-10mm thick including packing, providing cement mortar beading for sunshades staircase,steps, lands slabs etc. as directed by departmental officers etc. complete com

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:4-20mm thick including packing, providing cement mortar beading for sunshades staircase, steps, lands slabs etc., as directed by departmental officers etc,

Providing granolethic floor finish in cement concrete 1:2:4 mix using 25mm ISS metal to thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M. Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Dadooing walls with Glazed tites of sizes 150 mm X 150 mm x 6mm of proved make and quality and colour Iset in cement mortar 1:2 sand) over 10 mm boom layer plan Plastering and poitig with while cement neatly directed

Providing weathering course with best quality of trick Jelly 20mm gauge in pure slaked me ino sand to be added) over root stab, the proportion of tek jelly to lime being 32 to 12.6 well bested with wooden beaters for giving required slope and thicknes

Finishing top roof mix one course machine pressed tiles of size 20 cm x 20 cm 14 x 2 cm approved qty with CM 1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc.,

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges eto, complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved quality and 16 colour over a priming coat, including through scrapping clean removel of dirt etc complete

Painting two coats of new iron work with best quality synthete arvamat paint of approved quality and colour with poming coat including the cost all materials a complete, in all floors

Fabricating Supply and fixing and position of MS Door with single leave. The door uber frame will be 40x40vdmm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x0 mm with cross stiffner 25x 25x5 mm flats covered Door 0.90m x 2.10m

Fabricating Supply and fixing and position of MS Windows with two leave. The window outer frame will be 35x35x6mm MS angle, the shutter frame will be MS angle intermediate stiffner will be 25x25x5 mm with cross stiffner 25x25x5mm flats cover Window size 1.20m x 1.30m

Ventilator 0.90m x 0.45m

Jolly size 0.90m x 0.45m

Supplying and Fixing followig electrical arrangement

Wiring with 2x 1.5 sq mm(22/03) PVC insulated SC. Unsheathed Cu, Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and SA FT. switch withpainting of suitable colour for open PVC light point/fan point (For electrical regulator) SD 17

Supply and fixing of 436Watts Flu Fitting complete with Electronic Ballast With TW round Block On Wall or Ceilling With Flu Tube With PVC unsheathed Copper Leads from Terminal to the Tube Light Fittings (SD 87)

Winng with 2x 1.5 sq mm(22/03) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A3 pin non inter locking CS plug withpainting of suitable colour with continuous earth wire connection of 14 SWGTC wire for open PVC plug point. (SD 36)

Supply and fixing of 440Watts Single Street Light Flu Fitting complete with Copper chok and Condesor With 20 mm GI Pipe( CLASS "B") With One number 20 mm GI bend complete on the existing post wall with 16 A Aerial Fuse unit on M.S Plate With PVC unsheathed Cu Leads, With MS clambs With Aluminium painting with Flu Tubes Street Light Fittings (SD 94)

Supply and run of 2x1.5 sqmm (22x0.3) PVC insulated SC unsheathed Cu.Conductor necessary angle iron and end supports for mains (SD 69)

Supply and run of 2x1.5 sqmm (22x0.3) PVC insulated SC unsheathed Cu.Conductor of 1100Vgrade on 7/20 GI Bearer Wire of service connection Mains (SD 64)

Supply and foxing Of 1200mm (48) Sweep AC Ceiling Fan complete with stepped Electronic 300 W Regulator, with 1m down rod with Fan clamp with side plates and cross arm of size 450mm (18) (SD106)

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

M SENTHILKUMAR